Author |
Message |
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Shotgun not wanting to jack shell into action??
I've got a Remington 887 nitromag and I'm having problems with the gun not wanting t jack the shell from the tube to the action. It does it after two or 3 pumps, normally. Wondering what could be the cause of this, and of there's anything I could do besides taking to to a gun smith to get it fixed.
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Sun Nov 27, 2011 8:42 pm |
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm Posts: 2731 Location: Lafayette, LA
|
Shotgun not wanting to jack shell into action??
If you don't wanna take it to a gunsmith, take it to a landfill. Then go out and get a SBE or Extrema 2.
_________________ 1644 WeldCraft / 27 GDLT Ranger R71 / 125 Merc
|
Sun Nov 27, 2011 8:55 pm |
|
|
Quack Stackin
MMT F.E.
Joined: Mon Feb 14, 2011 6:07 pm Posts: 759 Location: NE ALABAMA
|
Re: Shotgun not wanting to jack shell into action??
|
Sun Nov 27, 2011 8:57 pm |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
If money grew on trees I'd have a sbe2 or xplor
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Sun Nov 27, 2011 8:59 pm |
|
|
Quack Stackin
MMT F.E.
Joined: Mon Feb 14, 2011 6:07 pm Posts: 759 Location: NE ALABAMA
|
Re: Shotgun not wanting to jack shell into action??
Get a stoeger, easy on the wallet, and its a great gun,I loved mine...I put it threw he'll for almost five years with no problems until I found a deal on a browning gold.... But I haunt heard anything good about those 887's
|
Sun Nov 27, 2011 9:02 pm |
|
|
postalpaul
MMT 1000 Club
Joined: Sun Nov 01, 2009 6:25 pm Posts: 1935 Location: Kaufman- TEXAS
|
Re: Shotgun not wanting to jack shell into action??
Is it not EXTRACTING the dead shell from the barrel or RELEASING the new live round from the magazine?? Clean it VERY well first and foremost
|
Sun Nov 27, 2011 9:04 pm |
|
|
duckduckboom
MMT Elite Member
Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La
|
Re: Shotgun not wanting to jack shell into action??
870
_________________ You have your whole life to be an idiot, take a day off!
|
Sun Nov 27, 2011 9:06 pm |
|
|
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
Re: Shotgun not wanting to jack shell into action??
Is the shell releasing from the mag tube on first pump or after pumping it a few times? Yeh get you one of those Benelli POS and then you can really be pissed when you have spent 5x the money and it still breaks down.
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Sun Nov 27, 2011 9:09 pm |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
It's not releasing the live round from the magazine. It takes 2 or 3 pumps before it actually jacks it onto the action.
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Sun Nov 27, 2011 9:11 pm |
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm Posts: 2731 Location: Lafayette, LA
|
Shotgun not wanting to jack shell into action??
^thats why I shoot an Beretta
_________________ 1644 WeldCraft / 27 GDLT Ranger R71 / 125 Merc
|
Sun Nov 27, 2011 9:11 pm |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
Believe me I would be shooting one too if I'd know this would happen. Figured I'd just save some money and get something that actually works well and shoulders good for me. I've got no complaints except for this, overall it's a great gun, and has killed quite a few ducks so far. Just ran into this problem last hunt when I put 3.5" blindsides in it. Thought maybe it could of been the shell, does it with a 3" xpert as well.
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Sun Nov 27, 2011 9:20 pm |
|
|
BradS
MMT 1000 Club
Joined: Wed Jan 14, 2009 5:23 am Posts: 4514 Location: Lafayette, La
|
Re: Shotgun not wanting to jack shell into action??
It just dosent like you either
|
Sun Nov 27, 2011 9:21 pm |
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm Posts: 2731 Location: Lafayette, LA
|
Shotgun not wanting to jack shell into action??
Knew that was coming.
_________________ 1644 WeldCraft / 27 GDLT Ranger R71 / 125 Merc
|
Sun Nov 27, 2011 9:26 pm |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Sun Nov 27, 2011 9:30 pm |
|
|
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
Re: Shotgun not wanting to jack shell into action??
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Sun Nov 27, 2011 9:31 pm |
|
|
POKER1
MMT Elite Member
Joined: Tue Jan 13, 2009 8:02 pm Posts: 6243 Location: Bossier City
|
Re: Shotgun not wanting to jack shell into action??
Pull your trigger group and mag spring assy and clean really good. And by they way, just like a MM they can all have issues. I seen the B guns go down too so if you buying into that chit I got some property i want to sell you first.
_________________ 18x48 Charles Leonard / 36PD
"I do think there is a Squatch in these woods"!!!!!
|
Sun Nov 27, 2011 9:34 pm |
|
|
postalpaul
MMT 1000 Club
Joined: Sun Nov 01, 2009 6:25 pm Posts: 1935 Location: Kaufman- TEXAS
|
Re: Shotgun not wanting to jack shell into action??
http://randywakeman.com/ClunkerOf2009Award.htmSecond thought READ this and sell that thing before it kills you or a friend
|
Sun Nov 27, 2011 9:37 pm |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
Ima go ahead and break it down and give it a real real good cleaning and see if that helps. Appreciate the help poker
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Sun Nov 27, 2011 9:50 pm |
|
|
BradS
MMT 1000 Club
Joined: Wed Jan 14, 2009 5:23 am Posts: 4514 Location: Lafayette, La
|
Re: Shotgun not wanting to jack shell into action??
|
Mon Nov 28, 2011 8:32 am |
|
|
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
Re: Shotgun not wanting to jack shell into action??
|
Mon Nov 28, 2011 12:31 pm |
|
|
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
Re: Shotgun not wanting to jack shell into action??
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Mon Nov 28, 2011 12:53 pm |
|
|
kibb
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:58 pm Posts: 2731 Location: Lafayette, LA
|
Shotgun not wanting to jack shell into action??
I had shot an 870 for about 15 years and swore I could never justify buying a high dollar gun since the 870 was so reliable. The wife surprised me with an Extrema 2 for christmas 3 years ago and I had to eat my words. You can't compare until you shoot them side by side.
_________________ 1644 WeldCraft / 27 GDLT Ranger R71 / 125 Merc
|
Mon Nov 28, 2011 2:09 pm |
|
|
duckduckboom
MMT Elite Member
Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La
|
Re: Shotgun not wanting to jack shell into action??
870 will cost about 350 had it for about 10-12 years jammed the first time this weekend. The casing of the shell must have exanped because the extractor claw ripped the brass off when I pumped it. As for as benilli pump, the guy I pretty much hunt with every weekend shoots one and he is having trigger problems. Otha than his I have never seen one fail
_________________ You have your whole life to be an idiot, take a day off!
|
Mon Nov 28, 2011 5:09 pm |
|
|
jack3
MMT Pro Member
Joined: Fri Aug 07, 2009 10:01 am Posts: 410 Location: n/e Alabama
|
Re: Shotgun not wanting to jack shell into action??
|
Mon Nov 28, 2011 5:57 pm |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Mon Nov 28, 2011 10:57 pm |
|
|
BradS
MMT 1000 Club
Joined: Wed Jan 14, 2009 5:23 am Posts: 4514 Location: Lafayette, La
|
Re: Shotgun not wanting to jack shell into action??
You brought it up --- Lets put it out there
Go on and tell me who dont like me -- I dont really care if people like me but I think your full of shit just because you know most people that have a brain around here think your a total fuckin douchebag
Also -- Im willing to bet your "sources" dont have a fucking brain -- or are just as bigga douchebag as you,
|
Tue Nov 29, 2011 7:22 am |
|
|
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
Re: Shotgun not wanting to jack shell into action??
Brad is a good fella and one of those people you can call up & he'll drop what he's doing to help you out. Much like most of the members here on MMT.
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Tue Nov 29, 2011 7:29 am |
|
|
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
Shotgun not wanting to jack shell into action??
_________________ 24x60 Dual Prodrives
|
Tue Nov 29, 2011 8:19 am |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Tue Nov 29, 2011 1:05 pm |
|
|
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
Re: Shotgun not wanting to jack shell into action??
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Tue Nov 29, 2011 1:48 pm |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
Back to subject real quick... It seems to do it the worst with a 3.5" shell. I put 2 3/4 in it and it didint do it as bad. There was a time with the 3.5 were it just wouldent jack it into the action at all. I pushed the shell back some, into the shell tube, and released and tried to pump gain and it jacked it in. Any ideas here?
And Coe and Brad - alright I give, what I ment to say was he's a douche towards me. Ima go ahead and apologize, brad sorry for calling you a douche. I throw in the towel you seem to be an alright guy, I don't know you so I'm not gonna sit here and try and judge you.
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Tue Nov 29, 2011 2:06 pm |
|
|
Crews
MMT 1000 Club
Joined: Wed Jan 14, 2009 9:07 pm Posts: 2260 Location: Lafayette
|
Shotgun not wanting to jack shell into action??
I know what's wrong with your gun, but I'm not going to tell you, because you're a shithead.
_________________ 24x60 Dual Prodrives
|
Tue Nov 29, 2011 2:08 pm |
|
|
austinabear
MMT Pro Member
Joined: Tue Mar 15, 2011 11:15 pm Posts: 238 Location: Port Neches, SETX
|
Re: Shotgun not wanting to jack shell into action??
I'll never understand why people feel the need to shoot 3.5's
|
Tue Nov 29, 2011 2:46 pm |
|
|
duckduckboom
MMT Elite Member
Joined: Tue Nov 23, 2010 6:33 pm Posts: 5603 Location: Corner of Hell an high water, La
|
Re: Shotgun not wanting to jack shell into action??
I only shoot them at geese
_________________ You have your whole life to be an idiot, take a day off!
|
Tue Nov 29, 2011 3:20 pm |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
Well these were givin to me, buddie bought some not paying attention and thinking they were 3", then realized once he got to the house they were 3.5s no refund on shells at academy so I got a free box of shells seeing that my gun actually chambered them unlike his. Got some gun scrub, and sprayed all of the gunk out of my gun that had built up, and it seemed to fix the problem, after one hell of a cleaning. Thanks for all the input
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Tue Nov 29, 2011 5:05 pm |
|
|
BradS
MMT 1000 Club
Joined: Wed Jan 14, 2009 5:23 am Posts: 4514 Location: Lafayette, La
|
Re: Shotgun not wanting to jack shell into action??
|
Tue Nov 29, 2011 5:59 pm |
|
|
BradS
MMT 1000 Club
Joined: Wed Jan 14, 2009 5:23 am Posts: 4514 Location: Lafayette, La
|
Re: Shotgun not wanting to jack shell into action??
|
Tue Nov 29, 2011 6:02 pm |
|
|
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
Re: Shotgun not wanting to jack shell into action??
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Tue Nov 29, 2011 6:03 pm |
|
|
BradS
MMT 1000 Club
Joined: Wed Jan 14, 2009 5:23 am Posts: 4514 Location: Lafayette, La
|
Re: Shotgun not wanting to jack shell into action??
A++++++ Would Read Again
|
Tue Nov 29, 2011 6:06 pm |
|
|
brasso
MMT Elite Member
Joined: Fri Oct 07, 2011 12:58 am Posts: 5557
|
Re: Shotgun not wanting to jack shell into action??
I cleaned it the best I could without breaking it down.. Couldent get to the gun buildup in the back of the action so I bought some "gun scrubber" and it got it all out without me having to completely disassemble. I cleaned it good enough the first time to make myself thin it was something else, such as a failed spring, etc. Apparently the buildup in the back of the action had something to do with it all.
_________________ 1850 Uncle J Delta Performance level 4 GTR
|
Tue Nov 29, 2011 6:12 pm |
|
|
|