Thanks Coe .... I'll look for that kind. I'm fix'n to re-due the one at the Wharf and I wants to try and do it rite this time !!!!
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Cutt'n Board .... http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=8&t=52982 |
Page 1 of 1 |
| Author: | BROOKS [ Mon May 05, 2014 10:00 am ] |
| Post subject: | Cutt'n Board .... |
I did the google thang with not much results. I need a cutt'n board to measure 4x8 and cain't find one. I want the kind that's white and 'bout 3/4 inch thick. any hook-ups would be appreciated at this time ....... |
|
| Author: | WestEndAngler [ Mon May 05, 2014 10:09 am ] |
| Post subject: | Re: Cutt'n Board .... |
Brooks, you need a 4' x 8' piece of "StarBoard" for the cutting board. They can be found all over and shipped directly to you. I'd make the rest of the table out of stainless. It will last forever done right. I'd avoid putting wood in the mix as it holds & traps bacteria/ odors. |
|
| Author: | BROOKS [ Mon May 05, 2014 10:13 am ] |
| Post subject: | Re: Cutt'n Board .... |
Thanks Coe .... I'll look for that kind. I'm fix'n to re-due the one at the Wharf and I wants to try and do it rite this time !!!!
|
|
| Author: | Will [ Mon May 05, 2014 10:13 am ] |
| Post subject: | Re: Cutt'n Board .... |
Whatever that stuff they make bathroom stall divider walls out of is some good stuff too. We got some from a school renovation and cut it to different sizes. I don't know what it's called but I imagine you can get a big sheet of it...it was solid plastic something... |
|
| Author: | WestEndAngler [ Mon May 05, 2014 10:15 am ] |
| Post subject: | Re: Cutt'n Board .... |
| Author: | gfowel [ Mon May 05, 2014 10:21 am ] |
| Post subject: | Re: Cutt'n Board .... |
If it helps any, Star king is the company's name that makes starboard. |
|
| Author: | WestEndAngler [ Mon May 05, 2014 10:23 am ] |
| Post subject: | Re: Cutt'n Board .... |
Here's a nice one fishcleaning table.jpg |
|
| Author: | Will [ Mon May 05, 2014 10:49 am ] |
| Post subject: | Re: Cutt'n Board .... |
dats real nice |
|
| Author: | deltaduckmaster [ Mon May 05, 2014 10:51 am ] |
| Post subject: | Re: Cutt'n Board .... |
I hate cleaning fish!! Sent from my iPhone using Tapatalk |
|
| Author: | BROOKS [ Mon May 05, 2014 11:27 am ] |
| Post subject: | Re: Cutt'n Board .... |
Nice is the one in that photo. I found one walla go thay said it can be shipped. Kind of expensive for the 3/4 inch ... but seemed to be nice. Thank the name is interstateplastc.com. I told them that I'd git back later ... gonna keep reserch'n. and Terry ..... no-body's likes to clean fish ..... but it has to be done !!!!
|
|
| Author: | WestEndAngler [ Mon May 05, 2014 11:36 am ] |
| Post subject: | Re: Cutt'n Board .... |
| Author: | T-Bubba [ Mon May 05, 2014 11:45 am ] |
| Post subject: | Re: Cutt'n Board .... |
i have one out of a peice of 3/8ths teflon... worked well but it needs to be changed how long does that "starboard" last |
|
| Author: | WestEndAngler [ Mon May 05, 2014 11:56 am ] |
| Post subject: | Re: Cutt'n Board .... |
| Author: | BoatDR [ Mon May 05, 2014 12:06 pm ] |
| Post subject: | Re: Cutt'n Board .... |
Hey Brooks, from starboard it comes in a 54"x8' sheet. Alot of the places that you can buy from will sell you a whole sheet for less than if they have to cut it for you (with the exact same skill saw that your probably own)..........just something to look into. Tell them that you want a price on a "whole sheet." I sell a bunch of starboard over here, in 1/2" black and white, but shipping is going to cost you as much as the starboard to ship something that large. |
|
| Author: | WestEndAngler [ Mon May 05, 2014 12:09 pm ] |
| Post subject: | Re: Cutt'n Board .... |
Brooks if you find a place locally let me know otherwise I can find it here and bring it to you when I head that direction in a few weeks... Just not sure on your timing for this project. |
|
| Author: | BROOKS [ Mon May 05, 2014 12:12 pm ] |
| Post subject: | Re: Cutt'n Board .... |
BoatDr's rite ... I found this when I put the Starboard name in .... this is I thank what I was look'n for ..... http://www.boatoutfitters.com/Raw-Mater ... 1-213.html My table I think is gonna last ..... just need a sheet of this stuff to do the overlay. and Coe .... I ain't in no hurry. |
|
| Author: | southernfire97 [ Tue May 06, 2014 10:29 am ] |
| Post subject: | Re: Cutt'n Board .... |
I know our academy sells those here in south ms |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|