It is currently Mon Jul 07, 2025 2:47 pm




Reply to topic  [ 26 posts ] 
 Opening day rants.  
Author Message
MMT Pro Member

Joined: Sun Nov 25, 2012 5:53 pm
Posts: 426
Post Opening day rants.
Ok feel free to air them out here.


I hunt PAC. Yea I know it's crowded and full of dumb asses, but I don't have a lease and have hunted there since I was 12. The morning line up today wasn't terrible. Most everybody has their shit together. I made it there early, but not early enough to beat some one to my normal spot. He shined me off I moved on. Back up hole. It's 4:15 by now. second hole clear no one in sight. Set up. 1hr before LST couple guys come by I shine them they move on. LST Ducks are flying and dying. Great opener.

Then! Some fuckn DD wanna be pulls in 1 hour after LST. Best time of the morning puts around us for 5 min and sets up 25 yards from us. I could hear the water off his Hollow decoys lapping as he threw them in. I walk out to the marsh and politely say you have a boat right on the other side the bushes. Man your really close. No response. Said it again no response. Said fuck it sat down and watched the ducks fly circles around us. Then he breaks out his call. Oh and what a call it is. If you could imagine a basset hound mating with a mallard drake. That would be close. I say in a slightly raised voice "hey man that call seems a little flat. You may want to sharpen it up." His response " oh I just need to tune it". Nay nay I say you need to swallow it and choke on it.

End of rant. BTW 12 birds by 8 not a bad opener considering. Oh and no mojo. As soon as we turned it off they started landing and not flaring. Bunch of pass shooting after day break till then.


Sent from my bag phone.

_________________
35GTR on 1544 Weldcraft.....for now.


Sat Nov 15, 2014 10:58 am
Profile
MMT F.E.
User avatar

Joined: Tue Nov 12, 2013 9:30 am
Posts: 770
Location: EAST ARKANSAS
Post Re: Opening day rants.
One guy around you for opening morning not bad.


Sat Nov 15, 2014 12:01 pm
Profile
MMT Pro Member

Joined: Sun Nov 25, 2012 5:53 pm
Posts: 426
Post Re: Opening day rants.
One guy that close. A few 200yds plus. But I hunt where it's hard to get to.


Sent from my bag phone.

_________________
35GTR on 1544 Weldcraft.....for now.


Sat Nov 15, 2014 12:05 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 3:48 pm
Posts: 2363
Location: Chandler,Indiana
Post Re: Opening day rants.
My only opening day rant is the Ducks were all over me only problem is it was opening day for firearm deer not ducks. The only buck I seen was cutting through my front yard when I pulled in on the four wheeler.

_________________
I got a shotgun,rifle and a Go Devil Surface Drive a country boy can survive.
35+hp GDSD engine mods by George Merta
18x48 GDSD boat


Sat Nov 15, 2014 7:46 pm
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 12, 2010 12:42 pm
Posts: 2161
Location: Houma,LA
Post Re: Opening day rants.
What part of PAC were you at. I was on the island road side up by the limited area on the northwest side. I had went and set a blind on Friday. Sat morning I was in it about 4:50. Some guy upset and left because I was on the same area as him, but I was 250yards away. I never saw his blind while out there building mine. The guy left mad. I was sorry but I had my daughter and just decided to stay. Seen 2 other boats setup around me within 150yards. I didn't bitch and leave. It's opening weekend so I just deal with it. Needless to say we did ok considering I was letting my daughter shoot 1st. I was just cleaning up. Got buzzed by alot of teal and never shot hoping they would decoy.

_________________
Copperhead 12Hp SD on 1442 Alweld


Sun Nov 16, 2014 9:46 am
Profile WWW
MMT Addict

Joined: Wed Feb 20, 2013 6:43 pm
Posts: 656
Post Re: Opening day rants.
I am surprised that there are not more people ranting about opening day problems! The opener here in Florida is almost always a cluster and I threaten to skip it every year but cannot help myself. 250 yards on opening day is a dream on some of these lakes but 150 yards is getting a little close


Sun Nov 16, 2014 10:06 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 12, 2010 12:42 pm
Posts: 2161
Location: Houma,LA
Post Re: Opening day rants.

_________________
Copperhead 12Hp SD on 1442 Alweld


Sun Nov 16, 2014 10:33 am
Profile WWW
MMT Pro Member

Joined: Sun Nov 25, 2012 5:53 pm
Posts: 426
Post Re: Opening day rants.
I hunt the rear of the reserve behind GW camp. I brought my little cousin and his friend with me today and it was a lot less people. Still got my limit the Cuz and his buddy couldn't find their ducks. I found where the guy was yesterday and he was no more than 75ft behind me. Built a blind out of logs and twigs no brush. Bout laughed my ass off.


Sent from my bag phone.

_________________
35GTR on 1544 Weldcraft.....for now.


Sun Nov 16, 2014 12:04 pm
Profile
MMT Pro Member

Joined: Sat Oct 26, 2013 1:00 pm
Posts: 340
Location: Wisconsin
Post Re: Opening day rants.
Its not opening day here but we had 2 teenagers this morning show up an hour after shooting and had one on either side of us with no decoys trying to shoot the birds we were working. Lets just say after the talk we gave them they will never be back there again


Sun Nov 16, 2014 12:32 pm
Profile
MMT Pro Member

Joined: Sun Nov 25, 2012 5:53 pm
Posts: 426
Post Re: Opening day rants.

Might have been bitching about it but it was worth it.


Sent from my bag phone.

_________________
35GTR on 1544 Weldcraft.....for now.


Sun Nov 16, 2014 4:57 pm
Profile
MMT Member

Joined: Mon Oct 07, 2013 9:53 pm
Posts: 42
Post Re: Opening day rants.
Built a blind the day before opener, showed up at 350am and someone was sitting in it. Went to my plan B pond and someone was pulling in. Luckily the guy was nice enough and let me hunt with him. PRWMA is a disaster opening day.
Oh and to add to the madness, people were shooting at 515. Couldn't see your hand in front of your face but they were shooting.


Sun Nov 16, 2014 5:40 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6060
Location: Choudrant, La
Post Re: Opening day rants.
Somebody is sitting in my blind opening day I'd let em have the spot, but I'd pull every fuckin twig outta the ground I put out first

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sun Nov 16, 2014 10:03 pm
Profile
MMT Pro Member
User avatar

Joined: Sat Dec 31, 2011 1:25 am
Posts: 344
Location: Covington, LA
Post Re: Opening day rants.

_________________
Kliebert Custom
17x38 GDSD 27


Sun Nov 16, 2014 10:33 pm
Profile
MMT Addict
User avatar

Joined: Wed Apr 25, 2012 2:54 am
Posts: 623
Location: Toledo Bend
Post Re: Opening day rants.

_________________
Excel 1851vF86 w/ MB 55V
SHIT HAPPENS


Mon Nov 17, 2014 5:25 am
Profile
MMT Pro Member

Joined: Tue Dec 03, 2013 12:39 pm
Posts: 341
Location: Houston Delaware
Post Re: Opening day rants.
Our state laws require 500yrds between blinds unless they are on private property and the owner approves it. One more week and our second split opens along with goose but it's only open for a week


Sent from the company's iPad while at work

_________________
Dont criticize a farmer with your mouth full


Mon Nov 17, 2014 10:51 am
Profile
MMT Pro Member

Joined: Wed Jan 14, 2009 2:00 pm
Posts: 428
Location: Hammond, LA
Post Re: Opening day rants.


Mon Nov 17, 2014 10:57 am
Profile
MMT Member

Joined: Mon Oct 07, 2013 9:53 pm
Posts: 42
Post Re: Opening day rants.
GW on middle river were enforcing different rules than GW on the west. Plus they hang out at the launch not down in the marsh. I got stoppe at 315 and the GW said he already seen 10 boats go by.


Mon Nov 17, 2014 11:16 am
Profile
MMT Pro Member

Joined: Wed Jan 14, 2009 2:00 pm
Posts: 428
Location: Hammond, LA
Post Re: Opening day rants.


Mon Nov 17, 2014 11:38 am
Profile
MMT Pro Member

Joined: Tue Jul 22, 2014 6:24 pm
Posts: 194
Location: SE Louisiana
Post Re: Opening day rants.
Not wanting to hi-jackbut looking for some info. Can anyone give me a little direction in regards to PAC. Looking to make a hunt there, but I've never been. I've fished and crabbed there before. Which launch should I check out? Island road or the one across the canal? Will have a boat blind. Looking to go scout Saturday after lunch and hunt Sunday morning.

Any info would help, either a reply or a PM would be greatly appreciated.

Thanks.

_________________
2015 1854 Prodigy Evolve Side Console 37 GTR


Mon Nov 17, 2014 11:53 am
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 12, 2010 12:42 pm
Posts: 2161
Location: Houma,LA
Post Re: Opening day rants.

_________________
Copperhead 12Hp SD on 1442 Alweld


Mon Nov 17, 2014 1:19 pm
Profile WWW
MMT 1000 Club
User avatar

Joined: Tue Jan 12, 2010 12:42 pm
Posts: 2161
Location: Houma,LA
Post Re: Opening day rants.

_________________
Copperhead 12Hp SD on 1442 Alweld


Mon Nov 17, 2014 1:25 pm
Profile WWW
MMT Pro Member

Joined: Sun Nov 25, 2012 5:53 pm
Posts: 426
Post Re: Opening day rants.
They made us wait till 3:45 before allowing us to put in. I launched at 4 but I was 10 or 15 back in line. There were trucks lining up on the road so for safety sake I think they let every one go. I got to the landing abt 3:45.


Sent from my bag phone.

_________________
35GTR on 1544 Weldcraft.....for now.


Mon Nov 17, 2014 6:46 pm
Profile
MMT Member

Joined: Mon Oct 07, 2013 9:53 pm
Posts: 42
Post Re: Opening day rants.


Mon Nov 17, 2014 8:26 pm
Profile
MMT 1000 Club

Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
Post Re: Opening day rants.
My biggest complaint about this weekend is all the dumbass top water duck dynasty mutherfukers who cut their 10 trillion candlepower led lights on as soon as the their boat leaves the trailer, and run down the channel blinding everybody up and down the bayou.

The damn light bars are for finding you way through the marsh or timber in unmarked waters, not running down a 100 yard wide canal with traffic in both directions. Your nav lights should be the only thing on until you get off the major bayou, river, channel, or whatever.

I'm not talking about guys gorilla launching in some creek somewhere, i'm talking about a major public launch with over 100 trucks launching duck boats and bay boats and shrimp boats running in the bayou.

And while I'm at it....if you pull back up to the marina with the double back down launch after you hunt and a guy is backing his truck down the ramp on one side, don't pull your shiny new boat up behind his submerged trailer and hop out to run get your truck while the other 5 guys in the boat just sit there blocking the ramp. The guy loading his boat may get a tad aggrevated and bumper car his way in if the other guys won't move the boat when they see what's going on.


Mon Nov 17, 2014 9:13 pm
Profile
MMT Addict
User avatar

Joined: Wed Apr 25, 2012 2:54 am
Posts: 623
Location: Toledo Bend
Post Re: Opening day rants.
Sounds to me like you need a big light bar to shine back!

_________________
Excel 1851vF86 w/ MB 55V
SHIT HAPPENS


Tue Nov 18, 2014 6:05 am
Profile
MMT Pro Member

Joined: Sun Nov 25, 2012 5:53 pm
Posts: 426
Post Re: Opening day rants.
Waiting on friend at launch. Damn I love this opener.
Hadn't seen temps like this in years.


Sent from my bag phone.

_________________
35GTR on 1544 Weldcraft.....for now.


Wed Nov 19, 2014 4:44 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 26 posts ] 

Who is online

Users browsing this forum: No registered users and 41 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: