| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Marine Electronics on a Mud Hull with SD? http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=8&t=70463 |
Page 1 of 1 |
| Author: | rangerp [ Tue May 23, 2017 6:09 pm ] |
| Post subject: | Marine Electronics on a Mud Hull with SD? |
I have a few weeks left until my Uncle J and GT XD are completed. I have purchased most of the things I need like trolling motor. I have yet to purchase any electronics. Are there any particulars with mounting fish finders and GPS on aluminum hulls with SD motors? I will use the boat for fishing more than hunting. Any recommendations for electronics? |
|
| Author: | Russ [ Tue May 23, 2017 6:33 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
Search. There was a thread not long ago. There were a few options for transducer mounting, and there are a bunch of threads from people long gone from mmt how they mounted different items Sent from my SAMSUNG-SM-G891A using Tapatalk |
|
| Author: | Darryle [ Tue May 23, 2017 7:37 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
Could you use thru hull like we do with our kayaks? Guaranteed that it will not be drug off or damaged. I cut wax paper and wrapped square foam and built a containment "pond" for the epoxy I used. Mix it thin so it will flow in and around the transducer encapsulating completely. I am going to do the same thing under the floor between it and the hull. 1244 Atchafalaya Outdoor Designs W/ 12hp Copperhead |
|
| Author: | brickgw [ Wed May 24, 2017 12:53 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
I mounted mine with a adjustable /removable clamp on bracket from Sully. The head unit is on a ram mount. Everything can be removed or put back on in about 10 minutes. I can go out to the garage and snap some pics if ya want Sent from my SM-G900P using Tapatalk |
|
| Author: | rangerp [ Wed May 24, 2017 3:44 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
I would like to see it. |
|
| Author: | SETx Longtail [ Wed May 24, 2017 5:54 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
If you are going to find yourself at Caddo lake in a couple weekends you'll see my setup. It's simple and works well. |
|
| Author: | rangerp [ Wed May 24, 2017 7:03 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
Not going to be able to make it this time around. I recently took a job with a logistics company and am working weekends. I hope to make some of the other runs and definitely want to do Caddo next year. |
|
| Author: | SETx Longtail [ Wed May 24, 2017 9:14 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
10-4, if you search around a little I know pics of mine have been posted before. Hope to see you around some time! |
|
| Author: | brickgw [ Sat May 27, 2017 1:26 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
Sorry for the delay but here's how I set mine up. Im happy with it. I could've ran the wiring to look pretty but my main concern was making it as easy as possible to remove for hunting and reinstall for fishing. Sent from my SM-G900P using Tapatalk |
|
| Author: | Exbellicus [ Sat May 27, 2017 4:31 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
Prodrive makes one for $125 |
|
| Author: | 4Cody4 [ Sat May 27, 2017 5:48 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
I did this. With two RAM mounts it stays rigid so it reads depth even at 28mph. This way it's still easy to remove. Sent from my iPhone using Tapatalk |
|
| Author: | brickgw [ Sat May 27, 2017 9:15 pm ] |
| Post subject: | Re: Marine Electronics on a Mud Hull with SD? |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|