Author |
Message |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Wallisville 3.6.11
I'll be adding more videos once I get them all uploaded.
[youtube]http://www.youtube.com/watch?v=g36hGROx56U[/youtube]
Yes, I have this crossing on the GoPro it's pretty crazy lol
[youtube]http://www.youtube.com/watch?v=uWhI7S_Z51Y[/youtube]
Here's an area that is normally full of water that I have to cross in order to get to some good mud. The water was so low there was no way I was risking going back there without anyone to give me a hand. The area is full of sand, shell & thick clay type mud. This video is unedited and no music. I came into the area and turned around, had to remove the bolt to trim the motor down.
[youtube]http://www.youtube.com/watch?v=xGG8LrC4Xb0[/youtube]
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 8:24 pm |
|
 |
SmokeEater829
MMT 1000 Club
Joined: Sat Jun 13, 2009 8:48 pm Posts: 1830 Location: Belle Chasse, LA
|
 Re: Wallisville 3.6.11
Looks like alot of sand in that stuff. You gonna need a prop soon!!!!
_________________ Mud Buddy 4500 Black Death hauling the Uncle J 18x58
|
Sun Mar 06, 2011 8:32 pm |
|
 |
TURBODRIVE
MMT 1000 Club
Joined: Wed Jan 14, 2009 2:27 am Posts: 1612
|
 Re: Wallisville 3.6.11
cool video, were you just sitting the gopro on your hunt deck, LOL
|
Sun Mar 06, 2011 8:44 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
That's not the GoPro... I am putting that one together right now...
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 8:54 pm |
|
 |
TURBODRIVE
MMT 1000 Club
Joined: Wed Jan 14, 2009 2:27 am Posts: 1612
|
 Re: Wallisville 3.6.11
ah, ok, well i saw you wiping the lense and the sound quality sounded like it
|
Sun Mar 06, 2011 9:02 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
For someone reason I can't get the "16x9" format to work after I import my video.. I have some footage rendering right now hopefully YouTube will like the music I chose.
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 9:46 pm |
|
 |
TURBODRIVE
MMT 1000 Club
Joined: Wed Jan 14, 2009 2:27 am Posts: 1612
|
 Re: Wallisville 3.6.11
|
Sun Mar 06, 2011 9:56 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
Pearl Jam - Nothing Man only one I could find with similar play times  It's 68% done rendering still have to upload to YouTube
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 9:59 pm |
|
 |
TURBODRIVE
MMT 1000 Club
Joined: Wed Jan 14, 2009 2:27 am Posts: 1612
|
 Re: Wallisville 3.6.11
well i'll be here till 6 in da monin!
|
Sun Mar 06, 2011 10:00 pm |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: Wallisville 3.6.11
what was that drippin from around the starter?
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Sun Mar 06, 2011 10:16 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
I'm going to have to get on the phone with these Corel people you'd think you pay $60 and you would be able to make HD 16x9 1080P movies... It's now uploading to YouTube BTW
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 10:17 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 10:17 pm |
|
 |
eljefe
MMT Elite Member
Joined: Thu Jan 13, 2011 7:32 am Posts: 5210 Location: Beaumont Texas
|
 Re: Wallisville 3.6.11
He'll yea coe that's some bad mud......I could hear the shell.......if I would have been able to make it id have been in reverse the whole time 
_________________ You can't see the sunrise if your eyes are closed. dying aint much of a livin....
Black ops IITX marshstalker
1840 WC www.wccustomboats.com fuel injected 25 GTR
|
Sun Mar 06, 2011 10:24 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 10:28 pm |
|
 |
eljefe
MMT Elite Member
Joined: Thu Jan 13, 2011 7:32 am Posts: 5210 Location: Beaumont Texas
|
 Re: Wallisville 3.6.11
It looked tough and with all the sand its hard to get moving.
_________________ You can't see the sunrise if your eyes are closed. dying aint much of a livin....
Black ops IITX marshstalker
1840 WC www.wccustomboats.com fuel injected 25 GTR
|
Sun Mar 06, 2011 10:35 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 10:41 pm |
|
 |
eljefe
MMT Elite Member
Joined: Thu Jan 13, 2011 7:32 am Posts: 5210 Location: Beaumont Texas
|
 Re: Wallisville 3.6.11
Hovercraft?
_________________ You can't see the sunrise if your eyes are closed. dying aint much of a livin....
Black ops IITX marshstalker
1840 WC www.wccustomboats.com fuel injected 25 GTR
|
Sun Mar 06, 2011 10:42 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
Well, here she is.... It's still processing for the next 10 minutes so you may not be able to immediately view it. I hope the audio didn't get taken out, if so I'm going to delete & redo it.
[youtube]http://www.youtube.com/watch?v=g36hGROx56U[/youtube]
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 10:45 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
Okay guys its 100% published, still processing video quality will improve...but you can now view it. ENJOY!
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 10:54 pm |
|
 |
TURBODRIVE
MMT 1000 Club
Joined: Wed Jan 14, 2009 2:27 am Posts: 1612
|
 Re: Wallisville 3.6.11
great vid, yeah the 240p doesn't justify it
|
Sun Mar 06, 2011 11:00 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
Y'all jump to YouTube & change the video quality settings to 720P HD, its some bad ass footage lol...I especially like me going over the pipeline crossing they had just dredged that a few months back moving pipe around and its so thick there it had never settled out 
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 11:04 pm |
|
 |
TURBODRIVE
MMT 1000 Club
Joined: Wed Jan 14, 2009 2:27 am Posts: 1612
|
 Re: Wallisville 3.6.11
it musta still been processing when i first viewed it, 240 was only available
just watched it in 780, awesome video
nice gator at 4:11
did you speed up the video, or were you just hauling that much arse?
|
Sun Mar 06, 2011 11:11 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
I was hauling that much arse and headed North into the wind  When I was coming down river (Trinity) I hit 34.8 MPH  SOB is dialed in I tell yah! First time running with just me & GPS
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 11:15 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
Yeah I saw a few gators, that was the largest. The video of the GPS was filmed with my hand held camera so perhaps a different frame rate but they are all set to 30 FPS.
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 11:16 pm |
|
 |
TURBODRIVE
MMT 1000 Club
Joined: Wed Jan 14, 2009 2:27 am Posts: 1612
|
 Re: Wallisville 3.6.11
you musta been on r4 r3 is bout the same quality just a lil wider resolution (not as tall as r4) and at 60fps incase you wanna slow it down at times. you'll have it figured out before i will 
|
Sun Mar 06, 2011 11:22 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
Yeah r4 I shot SETX with r3
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Sun Mar 06, 2011 11:30 pm |
|
 |
MeatWagon
MMT Pro Member
Joined: Tue Jan 25, 2011 1:22 pm Posts: 497
|
 Re: Wallisville 3.6.11
good video 
_________________ SENT VIA HOOT OWL!
I drive a Godevil and don't give a shit about your message!!!
MeatWagon GoDevil 35 Surface Drive on a 13x60 MaxCraft AIRBOAT HULL!
|
Mon Mar 07, 2011 2:27 am |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Mon Mar 07, 2011 8:04 am |
|
 |
muddiejeep
MMT F.E.
Joined: Tue Jan 13, 2009 6:24 pm Posts: 761 Location: New Orleans, LA.
|
 Re: Wallisville 3.6.11
good videos
_________________ When in doubt, throttle out. 18x60 prodrive w/36 prodrive
|
Mon Mar 07, 2011 10:09 am |
|
 |
Woodiebuster
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
 Re: Wallisville 3.6.11
The music was horrible. 
_________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193
(New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me
|
Mon Mar 07, 2011 4:47 pm |
|
 |
dozrya
MMT 1000 Club
Joined: Wed Apr 07, 2010 8:05 am Posts: 1228 Location: Houma, LA
|
 Re: Wallisville 3.6.11
Speaking of clams, you should see my skeg after the SETX run.
_________________ 1754 Xtreme 35 GTR Stage 1
|
Mon Mar 07, 2011 8:32 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Mon Mar 07, 2011 9:54 pm |
|
 |
BradS
MMT 1000 Club
Joined: Wed Jan 14, 2009 5:23 am Posts: 4514 Location: Lafayette, La
|
 Re: Wallisville 3.6.11
The only down side to the go pro that I can see is there is no zoom --- Id like to buy one to film some hunts and mount it under the gun barrel but I dont know how well it would work @ 100 yards
|
Tue Mar 08, 2011 4:30 am |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Tue Mar 08, 2011 7:11 am |
|
 |
hosed46
MMT Member
Joined: Sun Mar 06, 2011 4:36 pm Posts: 13 Location: Houston, TX
|
 Re: Wallisville 3.6.11
headed out there tomorrow... going to try and do some fishing and maybe mess around in the mud a little bit.
_________________ Excel VDB 1551 With A 27 HD Mud Buddy
|
Wed Apr 27, 2011 1:34 pm |
|
 |
dakotaTX
New Member
Joined: Thu May 19, 2011 10:10 am Posts: 1
|
 Re: Wallisville 3.6.11
I tried to PM you but its stuck in the outbox...I have been researching mud motors for a while now. You seem to be very pleased with your purchase, and that's about the same type of rig i'm looking for. I live in the Houston area and do most of my hunting and fishing from glaveston down to port oconnor. I have a couple of questions:
1. How shallow does your rig draft? 2. How skinny will it run on hard sand bottom, and how much water do you need to get on plan? 3. Did you buy the motor stock or did you modify? 4. Do you like the hydroturf? I was worried it would dryout or start turning everything black like a truck bedliner?
|
Mon May 23, 2011 2:15 pm |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: Wallisville 3.6.11
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Mon May 23, 2011 2:42 pm |
|
 |
|