It is currently Sat Jul 19, 2025 6:21 am




Reply to topic  [ 62 posts ]  Go to page 1, 2  Next
 Giga  
Author Message
MMT Sponsor

Joined: Tue Jan 13, 2009 7:07 pm
Posts: 16608
Post Giga
Heard you and your push pole had some problems today !!

_________________
17x48 extreme stage 2 GTR
20X60 DUAL RIG BOWFISHING ADDITION
http://www.scalesandtailsbowfishing.com


Sun Jul 17, 2011 5:38 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 8:02 pm
Posts: 6243
Location: Bossier City
Post Re: Giga

_________________
18x48 Charles Leonard / 36PD

"I do think there is a Squatch in these woods"!!!!!


Sun Jul 17, 2011 5:54 pm
Profile
MMT Moderator
User avatar

Joined: Thu Mar 05, 2009 9:11 am
Posts: 9143
Location: Houston | Surfside
Post Re: Giga
We were out exploring some areas & doing some scouting. We ran into an area with no water. He used a push pole to get back to where I had previously made a hole & got out. I came back in & jumped out. I helped him get his rig situated in the hole I made & he powered out. The least I could do since I was in shorts & he was in jeans. Just helping out :mrgreen:

I will say that reverse would have helped him today. I backed up a bit & powered right out Gtrraaaah!!!!

_________________
GTB 1860 w/ 2019 GTR40XD-HO


Sun Jul 17, 2011 5:58 pm
Profile WWW
MMT 1000 Club

Joined: Thu Dec 17, 2009 9:44 pm
Posts: 3067
Location: Earth
Post Re: Giga
Wonder what crow taste like...

_________________
Gator tail


Sun Jul 17, 2011 6:03 pm
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post Re: Giga
He will have some reason.

Like, the previous shift in humidity made the grass thicker than normal, and the only reason why WEA got out is becuase he has a modded motor.


Sun Jul 17, 2011 6:14 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 7:19 pm
Posts: 6441
Location: Trinity Bay - Texas
Post Re: Giga
Bout as exciting as the turd I laid this morning - wanna hear bout it too ???

WEA was following me - I run into a dead-end, signaled him to stop, which he did
in an area with a bit more water, I used my trusty pushpole with GDSD idling to
get back to where he was and we blasted outta there --- pretty routine stuff
when scouttin backwatters....

Going into full blind building mode next weekend....

Can't wait to bust some feathers....

_________________
Eat - Sleep - Hunt ! ! !

"It is good to have an end to journey toward; but
it is the journey that matters, in the end."


Sun Jul 17, 2011 6:21 pm
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post Re: Giga
:lol: :lol: :lol: :lol: :lol:







:? :? :? :? :? :?


Sun Jul 17, 2011 6:32 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Giga
Heaven forbid a GTR go into a ditch with a GDSD and just reverse out.

We know you were just saving him the embarrassment of getting stuck, burning a clutch, or breaking a belt.

That's what true friends are for.

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Sun Jul 17, 2011 6:43 pm
Profile
MMT 1000 Club
User avatar

Joined: Sat Jun 27, 2009 11:50 pm
Posts: 3777
Location: Knotts Island, North Carolina.
Post Re: Giga

_________________
Put yer face in the myrtles.


35 GTR chasing a 1650 Polarkrap.


Sun Jul 17, 2011 7:05 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5282
Location: Meraux,La.
Post Re: Giga
I believe giga! I'm selling my gtr y'all and getting a GDSD.




OH. By da way ma buddy just got from tennesse wit moonshine. Did I mention dis shit I'd awesome!


Sun Jul 17, 2011 7:08 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 8:02 pm
Posts: 6243
Location: Bossier City
Post Re: Giga
Hell yeh, FPF. Oh wait thats a MB...... :lol:

_________________
18x48 Charles Leonard / 36PD

"I do think there is a Squatch in these woods"!!!!!


Sun Jul 17, 2011 7:13 pm
Profile
MMT Moderator
User avatar

Joined: Thu Mar 05, 2009 9:11 am
Posts: 9143
Location: Houston | Surfside
Post Re: Giga
The rain was coming & it was time to go. So I did what anyone of us would have done. I motored back in there & jumped out. Giga was going side to side & I just got him centered & out he went. I did get a little video :lol:

_________________
GTB 1860 w/ 2019 GTR40XD-HO


Sun Jul 17, 2011 7:15 pm
Profile WWW
MMT 1000 Club
User avatar

Joined: Sat Jun 27, 2009 11:50 pm
Posts: 3777
Location: Knotts Island, North Carolina.
Post Re: Giga

_________________
Put yer face in the myrtles.


35 GTR chasing a 1650 Polarkrap.


Sun Jul 17, 2011 7:16 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Nov 01, 2009 6:25 pm
Posts: 1935
Location: Kaufman- TEXAS
Post Re: Giga
Giga. I'm willing to bet there's more post on this damn site about YOU than thd damn mud motors! :lol: :roll:


Sun Jul 17, 2011 9:18 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5282
Location: Meraux,La.
Post Re: Giga


Sun Jul 17, 2011 9:28 pm
Profile
MMT Pro Member

Joined: Sat May 01, 2010 2:44 pm
Posts: 411
Post Re: Giga
Damm Giga, you are losing your come back. Usually you would of posted that you went first to make the trail easier for the GTR, and you ran out of water. ;)


Mon Jul 18, 2011 6:00 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 5:23 am
Posts: 4514
Location: Lafayette, La
Post Re: Giga


Mon Jul 18, 2011 6:41 am
Profile
MMT Moderator
User avatar

Joined: Thu Mar 05, 2009 9:11 am
Posts: 9143
Location: Houston | Surfside
Post Re: Giga

_________________
GTB 1860 w/ 2019 GTR40XD-HO


Mon Jul 18, 2011 6:47 am
Profile WWW
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Giga
As long as the motor is idling, even though you are pushpoling, winching, or getting towed, you are not officially stuck.

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Mon Jul 18, 2011 7:16 am
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post Re: Giga
i thought it was NO ROPE, NO STUCK?


WAS THERE A ROPE USED?????????????


KIBB,
I think in most cases if motor isnt running, that doesnt mean your stuck, that means your broke down. LOL


Mon Jul 18, 2011 7:32 am
Profile
MMT Moderator
User avatar

Joined: Thu Mar 05, 2009 9:11 am
Posts: 9143
Location: Houston | Surfside
Post Re: Giga
With how far back he went (25 yds past me) he had to either get out or use push pole. I got out being in shorts & flip flops and spun my boat around real quick. Giga did the same using his push pole. I purposely dug a hole before blasting out of there to help him once he got back to where I was. When I saw he was having trouble getting the boat lined up right & going from side to side using push pole. I motored back in & hopped out helped him get his motor situated in the hole I had made & he powered out. Rain was coming so I wasn't going to leave anyone out there plus I needed to get back to the house.



I will say that was the main reason of why I bought the GTR. The other motors I tried out there just bogged down. Plus they couldn't go backwards, well they could you just had to get out & move it backwards :lol: I first was exposed to Gator-Tail by a buddy and saw him use the reverse first then trim it into position & out we went. It was night & day and from that moment on in my decision making process I knew I needed / wanted reverse. I'm having to relearn this motor all over. After installing the longer output shaft, on occasion I find myself trimming down further than I really need to.

_________________
GTB 1860 w/ 2019 GTR40XD-HO


Mon Jul 18, 2011 9:24 am
Profile WWW
MMT 1000 Club
User avatar

Joined: Mon Feb 16, 2009 6:09 pm
Posts: 4232
Location: Cypress, TX
Post Re: Giga


Mon Jul 18, 2011 9:27 am
Profile
MMT Moderator
User avatar

Joined: Thu Mar 05, 2009 9:11 am
Posts: 9143
Location: Houston | Surfside
Post Re: Giga

_________________
GTB 1860 w/ 2019 GTR40XD-HO


Mon Jul 18, 2011 9:49 am
Profile WWW
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 8:02 pm
Posts: 6243
Location: Bossier City
Post Re: Giga

_________________
18x48 Charles Leonard / 36PD

"I do think there is a Squatch in these woods"!!!!!


Mon Jul 18, 2011 10:17 am
Profile
MMT 1000 Club
User avatar

Joined: Mon Feb 16, 2009 6:09 pm
Posts: 4232
Location: Cypress, TX
Post Re: Giga


Mon Jul 18, 2011 11:25 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Giga
MF's are reachin for shit now. Should've known.

This has nothing to do with mods.

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Mon Jul 18, 2011 11:29 am
Profile
MMT Sponsor

Joined: Tue Jan 13, 2009 7:07 pm
Posts: 16608
Post Giga
I can't wate to get on the side of your stupid azz!!

_________________
17x48 extreme stage 2 GTR
20X60 DUAL RIG BOWFISHING ADDITION
http://www.scalesandtailsbowfishing.com


Mon Jul 18, 2011 11:30 am
Profile
MMT Super Elite Member

Joined: Mon Oct 19, 2009 6:38 pm
Posts: 10201
Location: SETX
Post Re: Giga
You can power out of the same hole with a stock motor the same way you can with a modded motor. I use to do it all the time!


Mon Jul 18, 2011 11:37 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Giga
Are you an illiterate fuke? Giga had to pole it 20 yds to where WEA washed a hole from which WEA blasted. WEA was able to get on step, not because he had mods, because he had reverse and dug a hole. WEA was just digging a tranasse for Giga.

I'm starting to think I could probably go through more chit with my old tunnel than you 2 with this GDSDs. You just gotta be a little smarter than the equipment than you operate.

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Mon Jul 18, 2011 11:38 am
Profile
MMT 1000 Club
User avatar

Joined: Mon Feb 16, 2009 6:09 pm
Posts: 4232
Location: Cypress, TX
Post Re: Giga


Mon Jul 18, 2011 12:03 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Giga
Kibb gonna walk da dog with his long tail. I know for sure they go through the slop.

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Mon Jul 18, 2011 12:05 pm
Profile
MMT Moderator
User avatar

Joined: Thu Mar 05, 2009 9:11 am
Posts: 9143
Location: Houston | Surfside
Post I was paid off... Sorry Giga lol

_________________
GTB 1860 w/ 2019 GTR40XD-HO


Mon Jul 18, 2011 12:30 pm
Profile WWW
MMT 1000 Club

Joined: Thu Jan 22, 2009 10:37 pm
Posts: 2577
Post Re: Giga
no rope,no stuck...yall aint got shit there.you coulda at least pulled on the side,like terry woulda done and rubbed it in a lil more.maybe cover him in mud or something like that.


Mon Jul 18, 2011 12:41 pm
Profile
MMT Sponsor

Joined: Tue Jan 13, 2009 7:07 pm
Posts: 16608
Post Giga
When I would have finished all you would have seen was a middle finger and the whites of his eyes!!

_________________
17x48 extreme stage 2 GTR
20X60 DUAL RIG BOWFISHING ADDITION
http://www.scalesandtailsbowfishing.com


Mon Jul 18, 2011 12:48 pm
Profile
MMT Moderator
User avatar

Joined: Thu Mar 05, 2009 9:11 am
Posts: 9143
Location: Houston | Surfside
Post Re: Giga
Never said there was anything to brag about. Just said that reverse would have helped out a bit yesterday.

The trail wasn't big enough for 2 boats side by side & I didn't feel like exposing the Iphone to Giga's prop spray lol

There was no competition going on just scouting areas for duck season. Tides have been low so meeting up / having some fun out there should be scheduled soon!

I wonder what Miller Lake looks like. Haven't been back there recently.

_________________
GTB 1860 w/ 2019 GTR40XD-HO


Mon Jul 18, 2011 12:50 pm
Profile WWW
MMT 1000 Club

Joined: Thu Jan 22, 2009 10:37 pm
Posts: 2577
Post Re: Giga
all you did there was prove that you be hangin out with ole gigga.Me,id prolly be less embarrased if i got caught jackin' off :lol:


Mon Jul 18, 2011 12:54 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Giga

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Mon Jul 18, 2011 12:55 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:58 pm
Posts: 2731
Location: Lafayette, LA
Post Giga

_________________
1644 WeldCraft / 27 GDLT
Ranger R71 / 125 Merc


Mon Jul 18, 2011 1:01 pm
Profile
MMT Moderator
User avatar

Joined: Thu Mar 05, 2009 9:11 am
Posts: 9143
Location: Houston | Surfside
Post Re: Giga

_________________
GTB 1860 w/ 2019 GTR40XD-HO


Mon Jul 18, 2011 1:03 pm
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 62 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 138 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: