| It is currently Mon May 12, 2025 1:58 pm |
|
Page 1 of 1 |
[ 15 posts ] |
| Print view | Previous topic | Next topic |
Too much pitch?
| Author | Message |
|---|---|
|
MMT Elite Member  Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA 
|
 Too much pitch?I have a 23 mbsd on a pretty heavy 1748 and my tiger prop wasnt doing to good so i got a 12x12 from Hopkins. I am very impressed in the prop but i think it is too much pitch for my poor ole 23. it sounds like my motor is loading up (might be fuel line issue) and the motor is only running about 3700 rpm (was 4100 rpm). Can i get my prop re pitched to a 11? And it pulls horribly to me. Which way do i bend the skeg?
Thanks in advance!! |
| Mon Dec 26, 2011 9:40 pm |
|
|
|
|
MMT 1000 Club  Joined: Mon Jul 27, 2009 8:10 pm Posts: 1436 Location: down da bayou
|
Re: Too much pitch? Prop too big def your probably have to trim it to high to turn up and that is causing it to pull
|
| Mon Dec 26, 2011 9:44 pm |
|
|
|
|
MMT Elite Member Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
Re: Too much pitch? Makes sense to me. But i had a 12.25 big blade on it before? But it wasmt but 10 pitch.
|
| Mon Dec 26, 2011 9:49 pm |
|
|
|
|
MMT 1000 Club Joined: Mon Jul 27, 2009 8:10 pm Posts: 1436 Location: down da bayou
|
Re: Too much pitch? Different design blades or totally different bend it to the starboard side
|
| Mon Dec 26, 2011 9:50 pm |
|
|
|
|
MMT Elite Member
Joined: Wed Mar 03, 2010 7:00 pm Posts: 6060 Location: Choudrant, La
|
Re: Too much pitch? Wasn't your Big Blade already pretty worn when you started fooling with mods?
I would have gotten another Big Blade and re-geared. _________________ CSM Custom 18x42 Battleship with a 36 PD beating you to the hole My Rig (Old Motor) viewtopic.php?f=5&t=45193 (New Motor) viewtopic.php?f=5&t=54733 Stumps Fear Me |
| Tue Dec 27, 2011 12:53 pm |
|
|
|
|
MMT Elite Member  Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
Re: Too much pitch? Its too much for that motor. I had a Hopkins 12x12 on a modded 35 and it would drop the rpm's on that motor a couple hundred rpm's. You can get it re pitched and that mb big blade is only 10" pitch and yes it makes a big difference. Have you tried running that prop with a load in the boat it may turn into a real turd when you do.
|
| Tue Dec 27, 2011 2:53 pm |
|
|
|
|
MMT Elite Member Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
Re: Too much pitch? Yeah it was worn and I took the carb off so it's stock except exhaust.
It isn't horrible with a load just bogs down. Have to trim it 9 miles high to run it. Think I might put it on my next motor. Are GTR 's hex or threaded? |
| Wed Dec 28, 2011 10:03 am |
|
|
|
|
MMT Elite Member Joined: Tue Jan 13, 2009 6:08 pm Posts: 5282 Location: Meraux,La.
|
Re: Too much pitch? Hex
|
| Wed Dec 28, 2011 10:31 am |
|
|
|
|
MMT 1000 Club  Joined: Tue Jan 13, 2009 6:42 pm Posts: 2377 Location: West Coast Wisconsin
|
Re: Too much pitch? What pulleys you running?
My first SD was a 05 23 hyper and it was running a 32/50 pulley configuration. Had no problem spinning the Hopkins prop. |
| Thu Dec 29, 2011 11:02 am |
|
|
|
|
MMT Elite Member Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
Re: Too much pitch? What ever comes stock on a 23 LA Special. I found a local prop shop that said he could re pitch it and put cup back on my Big Blade.
|
| Thu Dec 29, 2011 9:58 pm |
|
|
|
|
MMT F.E.  Joined: Tue Jan 25, 2011 5:47 pm Posts: 886 Location: Plaquemine
|
Re: Too much pitch? I think u could have gotten a lesser pitched Hopkins new if u would have known.
_________________ 18'x54"CC Hanko/ 36PD |
| Thu Dec 29, 2011 10:57 pm |
|
|
|
|
MMT Elite Member Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
Re: Too much pitch? |
| Fri Dec 30, 2011 6:13 pm |
|
|
|
|
MMT F.E. Joined: Tue Jan 25, 2011 5:47 pm Posts: 886 Location: Plaquemine
|
Re: Too much pitch? I'm not knocking Hopkins. I am running a 12x13 on my PD. He must have not put much cup r tip curl on the prop. I do have more prop torque on my engine wif the Hopkins also.
_________________ 18'x54"CC Hanko/ 36PD |
| Sun Jan 01, 2012 5:44 pm |
|
|
|
|
MMT Sponsor  Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX
|
Too much pitch? _________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS |
| Sun Jan 01, 2012 7:37 pm |
|
|
|
|
MMT F.E. Joined: Tue Jan 25, 2011 5:47 pm Posts: 886 Location: Plaquemine
|
Re: Too much pitch? Totally different motors; u should get a candy for recognizing that.
Fact is that the Hopkins props generally seem to pull more than the stock props. _________________ 18'x54"CC Hanko/ 36PD |
| Sun Jan 08, 2012 5:11 pm |
|
|
|
|
|
Page 1 of 1 |
[ 15 posts ] |
|
All times are UTC - 6 hours |
Who is online |
Users browsing this forum: No registered users and 107 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |