It is currently Fri Nov 20, 2026 8:12 am




Reply to topic  [ 13 posts ] 
 Trailer question 
Author Message
MMT Member

Joined: Sat Jan 21, 2012 7:54 pm
Posts: 31
Post Trailer question
I have a Gator Trax 3 man gator hide, and I love it. It has 4 bunks on the trailer, but we have a lot of very shallow boat landings up here and am thinking of taking them off and putting rollers on. has anybody any done this? If so what rollers did you use? I am afraid of that with the rollers on a flat bottom boat that it might start denting the bottom of the hull from going down the road and the weight of the boat not being as well distributed as it was on the bunks. But I could be wrong and that is what I want to find out.

Thanks,
Tanner Wildes
Hayward, WI

_________________
Tanner Wildes
www.wisconsinwaterfowler.com


Sun Dec 09, 2012 4:36 pm
Profile
MMT 1000 Club

Joined: Thu Dec 29, 2011 10:46 pm
Posts: 2342
Location: Mandeville, LA
Post Re: Trailer question
How are your bunks mounted? You need to lower them somehow. If they are on brackets, you can remove and mount to frame.


Sun Dec 09, 2012 4:49 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Jan 13, 2011 7:32 am
Posts: 5210
Location: Beaumont Texas
Post Re: Trailer question
I think he wants to roll it off the trailer instead of having to push it because of shallow water.....a winch would help pull it back on. try putting some steelflex or other slick coating on the bottom of the boat, should make it slide off bunks a whole lot easier.

_________________
You can't see the sunrise if your eyes are closed.
dying aint much of a livin....

Black ops IITX marshstalker


1840 WC www.wccustomboats.com
fuel injected 25 GTR


Sun Dec 09, 2012 4:53 pm
Profile
MMT Member

Joined: Sat Jan 21, 2012 7:54 pm
Posts: 31
Post Re: Trailer question
Sorry, I don't think I explained it corectly. I am thinking of taking off the bunks and putting rollers on instead. I have bunks on there now, and I put those mylar pads on them, but the water is so shallow that I am in that the water is barely making it to the bottom of the boat, and its not floating at all, no part of it. I know with fishing boats that the rollers are so slick that the boat doesn't have to be in water and it will roll off no problem at all, and that is what I am thinking of doing because of the shallow water, putting rollers on in place of the bunks so it can roll off the trailer with ease.

Thanks,
Tanner Wildes

_________________
Tanner Wildes
www.wisconsinwaterfowler.com


Sun Dec 09, 2012 4:58 pm
Profile
MMT Addict
User avatar

Joined: Sun Feb 05, 2012 7:35 am
Posts: 666
Location: Lafayette
Post Re: Trailer question
May hook the bottom.

_________________
IT IS WHAT IT IS!

YOU BRING YOUR HOUSE DOG HUNTING?.....


Sun Dec 09, 2012 5:01 pm
Profile
MMT Pro Member

Joined: Sun Aug 19, 2012 4:06 pm
Posts: 72
Location: Neenah, WI
Post Re: Trailer question
Don't want to jack your thread. I'm in Wisconsin and had the same problem several times this year. I was thinking about rollers as well but am worried that on long hauls it's going to beat up the bottom of the boat. My boat is easily over 2,000 lbs loaded and pushing it off the bunks just isn't going to happen, IMO. My thought was to fabricate some retractable rollers. If you have ever seen a semi trailer for transporting trusses they have retractable rollers in the bed for off loading.


Sun Dec 09, 2012 5:04 pm
Profile
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: Trailer question
Tanner,

Are your bunks elevated from the frame on brackets? I took mine off the brackets and bolted to the frame, and I lowered it 6" or so. Do that and put a slick coating on the bottom of the boat, and you should be better off. I would be worried about doing the rollers.


Sun Dec 09, 2012 5:07 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Jan 13, 2011 7:32 am
Posts: 5210
Location: Beaumont Texas
Post Re: Trailer question
i would make sure the rollers are directly beneath the runners so you dont dent the bottom over time, still i would use steel flex on the bottom of the boat to be safe....it should make it glide off that mylar.....if you do use steel flex be careful at normal steeper ramps, the boat will slide off quick. you might want to float the boat before unhooking it from the trailer in those situations.

_________________
You can't see the sunrise if your eyes are closed.
dying aint much of a livin....

Black ops IITX marshstalker


1840 WC www.wccustomboats.com
fuel injected 25 GTR


Sun Dec 09, 2012 5:10 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Jan 13, 2011 7:32 am
Posts: 5210
Location: Beaumont Texas
Post Re: Trailer question
the slick coating on the bottom works like those furniture moving pads.....makes a 2000 lb boat easy to slide.

_________________
You can't see the sunrise if your eyes are closed.
dying aint much of a livin....

Black ops IITX marshstalker


1840 WC www.wccustomboats.com
fuel injected 25 GTR


Sun Dec 09, 2012 5:13 pm
Profile
MMT Sponsor
User avatar

Joined: Wed Jan 14, 2009 10:22 am
Posts: 1764
Location: Tyler, TX
Post Re: Trailer question
Mount the boards directly to frame with 12 x 2.5" hex head self tapping screws. Make sure you have a high torque drill to sink the heads a little below flush.

I do this to all my personal trailers and have never had a single problem.

If you still need to go shorter, put the axle on top of springs but make sure you have large enough tires so the springs aren't too close to the ground.

If you have a GTR be careful on the height. If you use the trailering bracket and the trailer is too low then the prop and tail of the motor will be too low to the ground in low spots

_________________
Pete Willett
WC Custom Boats - Tyler, TX
http://www.wccustomboats.com


WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR
WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS


Sun Dec 09, 2012 5:13 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Jan 13, 2011 7:32 am
Posts: 5210
Location: Beaumont Texas
Post Re: Trailer question
steelflex................

_________________
You can't see the sunrise if your eyes are closed.
dying aint much of a livin....

Black ops IITX marshstalker


1840 WC www.wccustomboats.com
fuel injected 25 GTR


Sun Dec 09, 2012 5:19 pm
Profile
MMT Elite Member
User avatar

Joined: Thu Jan 13, 2011 7:32 am
Posts: 5210
Location: Beaumont Texas
Post Re: Trailer question
or one of our sponsors that i didnt even think of ....gator glide.

_________________
You can't see the sunrise if your eyes are closed.
dying aint much of a livin....

Black ops IITX marshstalker


1840 WC www.wccustomboats.com
fuel injected 25 GTR


Sun Dec 09, 2012 5:20 pm
Profile
MMT 1000 Club
User avatar

Joined: Fri Oct 29, 2010 8:24 am
Posts: 1958
Location: Bristol, FL
Post Re: Trailer question
I got the same problem, I can back across the river and not get the boat wet. Lower bunks, slick bottom coat and 8" rims.

_________________
1754 GTB / 35 GTR


Sun Dec 09, 2012 5:20 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 13 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: