| Author |
Message |
|
Michigan Duck slayer
MMT Member
Joined: Wed Jul 20, 2011 7:27 pm
Posts: 11
|
 Lifter, valve or cam Ok here we go, Mud Buddy black death 4500 and the exhaust valve on the port cylinder isn't opening all the way. I have adjusted the rocker arm and the valve lash is set correctly, the push rod is straight and it's seated correctly. The valve only fraction of movent compared to the exhaust valve on the other cylinder. So my question is what should I check next? And how the heck should I check it. My plan was to pull the head on that cylinder and looking at the exhaust valve, anything I should really look at or look for? Thanks for the help in advance, really hoping its not a cam lobe
|
| Mon Jul 01, 2013 8:40 pm |
|
|
|
craig
MMT Elite Member
Joined: Tue Jan 13, 2009 7:53 pm
Posts: 7515
Location: Chauvin
|
Re: Lifter, valve or cam Cam shaft.
If everything is set properly and your valve isn't opening, your cam shaft has rounded a lobe and needs replacing.
_________________
1750 GatorTail Extreme/Stage 3 37 GTR HD
Procrastination is a lot like masturbation. Sure it sounds great at the time but, in the end your only f--k--g yourself.
|
| Mon Jul 01, 2013 8:48 pm |
|
|
|
cupped up
MMT 1000 Club
Joined: Tue Jun 05, 2012 7:25 pm
Posts: 4205
Location: St. Amant, LA
|
Re: Lifter, valve or cam
|
| Mon Jul 01, 2013 8:52 pm |
|
|
|
NannySlayer
MMT Pro Member
Joined: Sun Feb 03, 2013 11:49 pm
Posts: 456
Location: S.C.
|
Re: Lifter, valve or cam what they said... at least you can upgrade now
_________________
17/54 gator Trax 35 mudbuddy... mostly stock
|
| Mon Jul 01, 2013 8:55 pm |
|
|
|
woodsman1977
MMT Pro Member
Joined: Wed Jul 13, 2011 5:04 am
Posts: 154
|
Re: Lifter, valve or cam If its the cam, I have a stock cam that you can have. It has 50 hours on it before I swapped it out.
Get that thing fixed for the Muskegon mud run in a month....
|
| Tue Jul 02, 2013 7:22 am |
|
|
|
take'emgator
MMT Super Elite Member
Joined: Mon Oct 19, 2009 6:38 pm
Posts: 10201
Location: SETX
|
Re: Lifter, valve or cam Is your spring broke on that valve? If not then take heed to Craigs comment 
|
| Tue Jul 02, 2013 7:26 am |
|
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
|
Re: Lifter, valve or cam
_________________
Before the internet, the majority of the village idiots stayed in their villages.
|
| Tue Jul 02, 2013 8:22 am |
|
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5376
Location: Venice, La
|
Re: Lifter, valve or cam  They got some real winners up in this mutha fuddka!! Sheeesh!
|
| Tue Jul 02, 2013 9:58 am |
|
|
|
take'emgator
MMT Super Elite Member
Joined: Mon Oct 19, 2009 6:38 pm
Posts: 10201
Location: SETX
|
Re: Lifter, valve or cam BB go fuck yourself FML
|
| Tue Jul 02, 2013 10:01 am |
|
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5376
Location: Venice, La
|
Re: Lifter, valve or cam
|
| Tue Jul 02, 2013 10:04 am |
|
|
|
cupped up
MMT 1000 Club
Joined: Tue Jun 05, 2012 7:25 pm
Posts: 4205
Location: St. Amant, LA
|
Re: Lifter, valve or cam
|
| Tue Jul 02, 2013 10:15 am |
|
|
|
Swampnuts
MMT 1000 Club
Joined: Wed Dec 12, 2012 3:12 pm
Posts: 1504
Location: St.Amant,LA
|
Re: Lifter, valve or cam
_________________
16X48 WELDBILT -25GTR EFI-sold
18x48 GTB - 35 GTR
Crown royal pro-staff
|
| Tue Jul 02, 2013 10:23 am |
|
|
|
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm
Posts: 8133
|
Re: Lifter, valve or cam Lot a fonkin going in here
_________________
Before the internet, the majority of the village idiots stayed in their villages.
|
| Tue Jul 02, 2013 10:28 am |
|
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5376
Location: Venice, La
|
Re: Lifter, valve or cam Myself! I hate short people! lol
|
| Tue Jul 02, 2013 10:42 am |
|
|
|
take'emgator
MMT Super Elite Member
Joined: Mon Oct 19, 2009 6:38 pm
Posts: 10201
Location: SETX
|
Re: Lifter, valve or cam Hate is such a strong word, Jesus don't like ugly, uh uh no he don't
|
| Tue Jul 02, 2013 10:44 am |
|
|
|
SCSuperfly
MMT Pro Member
Joined: Fri Nov 25, 2011 1:24 am
Posts: 466
|
Re: Lifter, valve or cam Take off your fuel pump and look through the hole/. Maybe you can see what condition your cam is in. I have a stock cam you can have too.
_________________
Modded 36 PD draggin' around an 1848 PD boat backwards!
|
| Tue Jul 02, 2013 7:04 pm |
|
|
|
jerimiahw
MMT 1000 Club
Joined: Sun Sep 23, 2012 8:10 pm
Posts: 1191
Location: chauvin
|
Re: Lifter, valve or cam I bought a spare stage 2 engine I will sell cam if interested let me know
|
| Tue Jul 02, 2013 9:39 pm |
|
|
|
