Author |
Message |
bassinsouthla
New Member
Joined: Thu Jul 10, 2014 8:02 pm Posts: 1
|
Custom boat for an outboard
I am looking for suggestions as to who builds a good custom boat with large front deck with storage and rod box for an outboard at an affordable price. I am looking to have someone build something no larger than an 18 x 54 for a tiller. Possibly a tunnel but seems like someone really needs to know how to build one in order for it to perform correctly. Any info would be appreciated.
|
Thu Jul 10, 2014 8:19 pm |
|
|
nasty
MMT 1000 Club
Joined: Thu Oct 04, 2012 7:36 am Posts: 1290
|
Re: Custom boat for an outboard
Capt. jj.. hes built a few tunnelhulls. Or dfou
|
Wed Jul 16, 2014 4:40 pm |
|
|
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
Re: Custom boat for an outboard
Eric Romero(custom aluminium boats) in Lydia La. Has experience with tunnels.
|
Wed Jul 16, 2014 4:43 pm |
|
|
careybrowning
MMT Pro Member
Joined: Thu Apr 02, 2009 2:30 pm Posts: 183
|
Re: Custom boat for an outboard
I just tested a nice 1854 with 24" sides Prodigy with a 70 yamaha on it this very morning. It was a sweet setup. Kinda made me miss outboards.
|
Thu Jul 17, 2014 11:15 am |
|
|
DUCK HEARSE
MMT 1000 Club
Joined: Fri Apr 06, 2012 8:48 am Posts: 3161 Location: Alabama
|
Re: Custom boat for an outboard
_________________ Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. - Mark Twain
|
Thu Jul 17, 2014 11:16 am |
|
|
careybrowning
MMT Pro Member
Joined: Thu Apr 02, 2009 2:30 pm Posts: 183
|
Re: Custom boat for an outboard
It ran a solid 38 this morning. The rpms were low though so it needs to try some different props to get it dialed in right. It was fun though after running mud motors for so long.
|
Thu Jul 17, 2014 11:25 am |
|
|
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
Re: Custom boat for an outboard
38 w 2 guys, 2 coolers, 2 large optimas, trolling motor, 20 gallons of fuel..........
turning 5600 rpms.........need to drop to a 15 pitch power tech to get the rpms up more...........
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Thu Jul 17, 2014 11:43 am |
|
|
msm8281
MMT Elite Member
Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
Re: Custom boat for an outboard
5600 sounds right with that load. Empty you should be close to 6000.
|
Thu Jul 17, 2014 11:46 am |
|
|
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
Re: Custom boat for an outboard
Gonna c what the 15 does........these F70's are really sweet...............
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Thu Jul 17, 2014 11:48 am |
|
|
Frog
MMT Sponsor
Joined: Mon Jun 13, 2011 8:49 am Posts: 3260
|
Re: Custom boat for an outboard
How much does the F70 cost with binnacle and set up for steering ?
_________________ http://www.gatorglide.com/
gatorheads@comcast.net
|
Thu Jul 17, 2014 12:51 pm |
|
|
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
Re: Custom boat for an outboard
Call me tomorrow
Sent from my iPhone using Tapatalk
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Thu Jul 17, 2014 6:42 pm |
|
|
DUCK HEARSE
MMT 1000 Club
Joined: Fri Apr 06, 2012 8:48 am Posts: 3161 Location: Alabama
|
Re: Custom boat for an outboard
_________________ Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. - Mark Twain
|
Thu Jul 17, 2014 6:55 pm |
|
|
mizzippi jb
MMT Elite Member
Joined: Wed Sep 21, 2011 2:53 pm Posts: 5077 Location: The duck Mecca called Ga!
|
Re: Custom boat for an outboard
Is that shep's boat?
_________________ HOTSAUCE170 wrote: I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid.
|
Thu Jul 17, 2014 7:03 pm |
|
|
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
Re: Custom boat for an outboard
It is.. Got another one also but w 21" sides out there and building 2 more now.
Sent from my iPhone using Tapatalk
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Thu Jul 17, 2014 7:05 pm |
|
|
mizzippi jb
MMT Elite Member
Joined: Wed Sep 21, 2011 2:53 pm Posts: 5077 Location: The duck Mecca called Ga!
|
Re: Custom boat for an outboard
That was the one outside in the lot today I guess...(sheps)
_________________ HOTSAUCE170 wrote: I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid.
|
Thu Jul 17, 2014 7:08 pm |
|
|
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
Re: Custom boat for an outboard
Yes sir
Sent from my iPhone using Tapatalk
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Thu Jul 17, 2014 7:14 pm |
|
|
Nate
MMT Pro Member
Joined: Sun Jun 17, 2012 1:30 pm Posts: 425 Location: Houma, LA
|
Re: Custom boat for an outboard
Prodigy- is that a tunnel hull?
_________________ 1944 skiff with 35 GTR
|
Fri Jul 18, 2014 5:20 am |
|
|
nocemdead
MMT F.E.
Joined: Sat Apr 07, 2012 12:58 pm Posts: 770 Location: atkins ar
|
Re: Custom boat for an outboard
Thirdtimesacharm does tunnels
_________________ 18x60 WC CUSTOM propelled by a 35GTR (25mph with a slight chop and a 6mph tailwind................
|
Fri Jul 18, 2014 11:54 am |
|
|
DUCK HEARSE
MMT 1000 Club
Joined: Fri Apr 06, 2012 8:48 am Posts: 3161 Location: Alabama
|
Re: Custom boat for an outboard
Call Robert at extreme metal fabrication
_________________ Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover. - Mark Twain
|
Fri Jul 18, 2014 3:27 pm |
|
|
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
Re: Custom boat for an outboard
That one doesn't have a tunnel but we can do.
Sent from my iPhone using Tapatalk
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Fri Jul 18, 2014 10:08 pm |
|
|
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
Custom boat for an outboard
Haven't run a 90.. The f70 is so much lighter and is a sweet engine that doesn't burn much fuel..... 90 would prob get into low to mid 40"s I'd think..
Sent from my iPhone using Tapatalk
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Fri Jul 18, 2014 10:09 pm |
|
|
Bad Boy
MMT Pro Member
Joined: Wed Jan 14, 2009 8:46 am Posts: 84 Location: From Da Basin to Da Wax
|
Re: Custom boat for an outboard
I just bought a Yamaha F70 and I am Highly Impressed with the Fuel Economy but I only have 6 Hrs on it. Does the Fuel usage get better after 10 Hrs?
|
Fri Jul 18, 2014 11:54 pm |
|
|
Prodigy
MMT Sponsor
Joined: Wed Jul 20, 2011 9:51 am Posts: 488
|
Re: Custom boat for an outboard
Shouldn't change a lot.. What boat u have it on w what prop? Rpms?
Sent from my iPhone using Tapatalk
_________________ Prodigy Boats https://www.facebook.com/Prodigyboats www.prodigyboats.com Contact for info - http://prodigyboats.com/contact-us/ 706-253-7766
|
Sat Jul 19, 2014 5:23 am |
|
|
Bad Boy
MMT Pro Member
Joined: Wed Jan 14, 2009 8:46 am Posts: 84 Location: From Da Basin to Da Wax
|
Re: Custom boat for an outboard
18X42 Southfork Vented Tunnel Hull with Hydraulic Jackplate. I ran a 15 P Powertech Semicleaver and was hitting the Rev Limiter @ 6300. I just ordered a 13x17 P True Yamaha Semicleaver. That should keep me off the Rev Limiter and give me more Speed.
|
Sat Jul 19, 2014 7:45 pm |
|
|
4Cody4
MMT 1000 Club
Joined: Thu Mar 31, 2011 11:21 am Posts: 2530 Location: Land of 10,000 Lakes
|
Re: Custom boat for an outboard
Bump for an oldie. I was just doing some homework on re-powering with an outboard and this is about the best thread I've found so far.
Anybody have anything to add with an 1854 sized boat and a 70ish HP outboard?
Can anybody tell me if the boat (square chine) will slide less or more with the outboard than with the mm?
Thanks,
_________________ "Two people in this world wear helmets, and that's dare devils and pussies." - Willie Braun
|
Wed Jun 20, 2018 11:06 am |
|
|
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
Re: Custom boat for an outboard
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Thu Jun 21, 2018 10:51 am |
|
|
4Cody4
MMT 1000 Club
Joined: Thu Mar 31, 2011 11:21 am Posts: 2530 Location: Land of 10,000 Lakes
|
Re: Custom boat for an outboard
That is helpful. I was planning to go run it a while and then possibly have some runners added to the bottom if it was skating bad. I’m hesitant to do that though just because there aren’t any builders near me.
Prowler is probably my closest option.
Sent from my iPhone using Tapatalk
_________________ "Two people in this world wear helmets, and that's dare devils and pussies." - Willie Braun
|
Thu Jun 21, 2018 11:28 am |
|
|
|