| Author |
Message |
|
ibfishin
MMT 1000 Club
Joined: Sun Dec 05, 2010 8:20 pm
Posts: 1127
Location: Okeechobee, FL
|
 Never seize??? Do you use on threads of bolts when installing heads, intake, exhaust, etc?
Sent from my SM-G920V using Tapatalk
_________________
35 GTR pushing an 18' Alumitech Custom
|
| Sun Feb 07, 2016 4:03 pm |
|
|
|
ibfishin
MMT 1000 Club
Joined: Sun Dec 05, 2010 8:20 pm
Posts: 1127
Location: Okeechobee, FL
|
Re: Never seize??? I used it when I had to replace the clutch on my GTR. Just not sure if I need to use it on everything. I had a hell of a time getting the drive disassembled so I made sure "never seize" was applied when I reinstalled everything.
Sent from my SM-G920V using Tapatalk
_________________
35 GTR pushing an 18' Alumitech Custom
|
| Sun Feb 07, 2016 4:13 pm |
|
|
|
flint87
MMT 1000 Club
Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
|
Re: Never seize??? Looks like you're working on all the same stuff as me right now. Can't believe how small the motor itself actually is with everything taken off.
Sent from my iPhone using Tapatalk
|
| Sun Feb 07, 2016 4:45 pm |
|
|
|
ibfishin
MMT 1000 Club
Joined: Sun Dec 05, 2010 8:20 pm
Posts: 1127
Location: Okeechobee, FL
|
Re: Never seize??? I'm not doing the cam yet. My case gasket isn't leaking yet.
Sent from my SM-G920V using Tapatalk
_________________
35 GTR pushing an 18' Alumitech Custom
|
| Sun Feb 07, 2016 5:56 pm |
|
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
|
Re: Never seize??? Not on the bolts. Maybe the coil screws and mounting bolts for the engine, but none of the others need it. Drive shaft, yes, so the clutch and stuff won't be stuck, flywheel nut, and prop nut threads. Everything else should pretty much come apart ok later.
|
| Sun Feb 07, 2016 5:58 pm |
|
|
|
ibfishin
MMT 1000 Club
Joined: Sun Dec 05, 2010 8:20 pm
Posts: 1127
Location: Okeechobee, FL
|
Re: Never seize??? Thanks!
Sent from my SM-G920V using Tapatalk
_________________
35 GTR pushing an 18' Alumitech Custom
|
| Sun Feb 07, 2016 9:22 pm |
|
|
|
SCmudder7071
MMT 1000 Club
Joined: Mon Feb 07, 2011 12:10 pm
Posts: 3024
|
Re: Never seize??? Never seize on the clutch. That's all you need.
_________________
1754 Extreme/LAProp Stage 2 GTR
|
| Sun Feb 07, 2016 10:03 pm |
|
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
|
Re: Never seize???
_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
| Mon Feb 08, 2016 6:23 am |
|
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
|
Re: Never seize??? Good idea. I always figured the studs were supposed to come off at the same time.  jk, but have noticed that before.
|
| Mon Feb 08, 2016 9:34 am |
|
|
|
deadbird8
MMT 1000 Club
Joined: Wed Feb 04, 2009 7:50 pm
Posts: 3833
Location: Old East Dallas, Texas
|
Re: Never seize???
_________________
Excel 1851F4 w/ MB35HD+R CDI with a little bit of this and little bit of that
|
| Tue Feb 09, 2016 5:17 am |
|
|
|
