got new prop ran it saturday 12 inch 2 blade still couldnt plane and slide down the creek bow still plowind . do i really need dual batteries in bow can i ditch one and move fuel tank to rear ? Dumped 2 guys and dog out of ramp after smoking a limit of honkies and boat ran pretty good still bow plowing????????????????????????

Mr. Vanguard.... We would really like to help you.. But, You need to speak in a language in which we can understand. You sound like a drunk Hillbilly. Please explain your problem and we can assist.
FYI.. You do NOT need two batteries (unless you are always running Trolling Motor.)

Another thing that creates Plowing is a Hook in the bottom of your boat. What type of boat. Do you have any pictures?

sorry i have an excell 1748 boat and a 35 MB cant get on plane if i have anything in my boat other that me and dog. i had a 11x10 prop on motor and moved up to a 12.25 prop helped but not what i hoped it would do it just helps me plow the bow a little faster

were are you located? How old is the Boat? Did you run into anything recently? Did it ever run right? How big is your Fuel tank in the front? Why do you have 2 batteries?

bought boat as is it is a 2007 mud buddy special it was a prerig from factory i bought it second hand last month ran good until i put a little weight in it it came as is with 2 batteries and fuel tank 6 gal under front deck. the whole rig has 17 hours on it hull is not damaged

located on East coast in Va. my first experience with a mud motor it is something new around hear very few around

I'm leanin toward hook in the hull also. Can you post a pic of the boat sitting on the trailer? Take pic from the side of the boat, showing trailer runners if possible. You could be ridin on the trailer wrong & that will cause the hook without you knowing it.

this is a stupid ? but are u sure that u are trimmed up high enought prop about a 1/3 out of the water on plane ?

Engine problem!

Do you know what kinda RPM's or speeds your getting? and yes, please post pics to help up determine problem..

ok will get pics when i get home from work today yes i trimmed it up till it cavitated and went back down a little. loaded and struggling i was 3600 rpm. Michah at MB recomended a new lower gear and performance exhaust or carbs

My super heavy boat is on plane and crusing at 3600 rpm. My prop is worn down. My boat is also a 17x48.