MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

First mud motor
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=15550
Page 1 of 1

Author:  Outdoor Joe [ Sun Jan 23, 2011 7:03 pm ]
Post subject:  First mud motor

I got a 14x36 riveted jonboat that ive been using for duck hunting the last two years, but i think its time to upgrade to a mud motor. I mostly run through soft mud (I'll sink mid shin to knee deep in most of it) but sometimes it gets a little tougher. I wanted to get some input from some people with experiece with mud motors as to whether to get a SD or LT. I usually run about 6 miles and it takes around 30 mins. I would like something that would keep me around that run time (or less if possible).

Author:  UNCLE-J [ Sun Jan 23, 2011 7:09 pm ]
Post subject:  Re: First mud motor

They both will serve the same purpose. Though, the SD will be like driving a outboard on a tiller. Some have a bit more tiller torque that others. A LT has ALOT more than everything.

SD would be easier to drive for your run

Uncle j

Author:  Outdoor Joe [ Sun Jan 23, 2011 7:13 pm ]
Post subject:  Re: First mud motor

should i stick around the same hp?

Author:  Woodiebuster [ Sun Jan 23, 2011 7:39 pm ]
Post subject:  Re: First mud motor


Author:  Outdoor Joe [ Sun Jan 23, 2011 7:41 pm ]
Post subject:  Re: First mud motor


Author:  Team Camo [ Sun Jan 23, 2011 8:38 pm ]
Post subject:  Re: First mud motor

No guts, no glory. Strap a 23hp MB mini lite on the back of that sucker & let it fly!!!!

Author:  Woodiebuster [ Sun Jan 23, 2011 9:36 pm ]
Post subject:  Re: First mud motor

Be really carefull in a little boat like that, a mudmotor will tear the shit out of a boat quick.

Author:  Midnight Sun [ Sun Jan 23, 2011 9:49 pm ]
Post subject:  Re: First mud motor

yea 23 mudbuddy is my thoughts just remember its a jon boat with probrobly a .090 gauge hull so i wouldnt do much stump jumpin

Author:  Outdoor Joe [ Sun Jan 23, 2011 10:16 pm ]
Post subject:  Re: First mud motor

I havent come across any stumps where i hunt at just a few rocks. I've been lookin at the 23hp MB and the 10hp Copperhead. Thanks for the input.

Author:  Woodiebuster [ Mon Jan 24, 2011 6:35 pm ]
Post subject:  Re: First mud motor

Just remember, hp to hp a mudmotor is way slower

Author:  GeeLeDouche [ Tue Jan 25, 2011 1:20 am ]
Post subject:  Re: First mud motor

I have a 16hp GDLT on a 1436 rivited boat and it does really well. I think if you go much more than 16-18hp you'll want to go with a short shaft. anything more will be hard on your boat.. just my 2 cents.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/