MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

50hp tiller
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=18420		 Page 1 of 1
Author:  spoonbill20 [ Tue May 10, 2011 7:08 am ]
Post subject:  50hp tiller
just picked up a 50hp tiller yesterday now i got to find a boat what size do yall think
Author:  cb5331 [ Tue May 10, 2011 7:29 am ]
Post subject:  Re: 50hp tiller
Put it on a 1436 and hold on tight. Just make sure you have the bitch running when you drop it off the trailer.
Author:  lizard55033 [ Tue May 10, 2011 7:57 am ]
Post subject:  Re: 50hp tiller
I'm thinking an 18ft square stern canoe :lol:
Author:  redleg3316 [ Tue May 10, 2011 8:04 am ]
Post subject:  Re: 50hp tiller
A solid 1648 and she will haul the mail.
Author:  spoonbill20 [ Tue May 10, 2011 9:19 am ]
Post subject:  Re: 50hp tiller
everybody round here telling me to get at least an 18 tunnel but i was thinking a light 17 0r 16. i dont know yet, anybody looking for a new two stroke 50?
Author:  Brinkleydog [ Tue May 10, 2011 9:26 am ]
Post subject:  Re: 50hp tiller
Author:  aweyerman [ Tue May 10, 2011 9:42 am ]
Post subject:  Re: 50hp tiller
Wish I could afford to take it off your hands... I would go with a tunnel, regardless of size.
Author:  redleg3316 [ Tue May 10, 2011 9:44 am ]
Post subject:  Re: 50hp tiller
Go with a 1752 to keep it leagal.
Author:  krogers [ Tue May 10, 2011 11:55 am ]
Post subject:  Re: 50hp tiller
I got a 40hp yam on a 1448,(bad idea, but it will take off like ur ex wife with your paycheck) and hits about every 10 feet in a good chop. So listen to the others when they say, 16'+ or plan on welding on a weekly basis.
Author:  Barroll [ Tue May 10, 2011 12:51 pm ]
Post subject:  Re: 50hp tiller
I used to have a 50 four stroke on a 1756 mod-v G3 and it would run high 30's with 2 ppl in it. And this was a heavy boat. I think it was a good combination.
Author:  robertb4wd [ Tue May 10, 2011 1:16 pm ]
Post subject:  Re: 50hp tiller
A friend has a 1242 w/ a 40 yamaha. It's fast, but seems to be stable. I would get at least a 1648 for a 50.
Author:  Team Camo [ Tue May 10, 2011 1:29 pm ]
Post subject:  Re: 50hp tiller
Buddy of mine has a 50 Tohatsu on a 1552 Weldbilt, & that mofo flies!!!!!!!!!!
Author:  War Eagle 1 [ Tue May 10, 2011 1:46 pm ]
Post subject:  Re: 50hp tiller
i had one on 1648 war eagle that would make you wanna put a seat belt on. it ran like a monkey with its azz on fire. This one did 41mph with a Powertech 14p out of the box. And still ran mid to high 30's with a real good load. It was a 2008 Tohatsu TLDI.
Author:  Woodiebuster [ Tue May 10, 2011 3:04 pm ]
Post subject:  Re: 50hp tiller
How would a 50 2 stroke run on a 17x54?
Author:  latravcha [ Tue May 10, 2011 3:18 pm ]
Post subject:  Re: 50hp tiller
1836 skif with a 40 merc
That makes you cheaks tighten in a curve
Author:  mudmarshall [ Tue May 10, 2011 3:25 pm ]
Post subject:  Re: 50hp tiller
i had a 60 merc on a 1442 crawfish skiff tlk about would haul ass and alot of weight only problem was it just sat kinda low in the water
Author:  po po mud duck [ Tue May 10, 2011 3:39 pm ]
Post subject:  Re: 50hp tiller
Author:  dabuckmaster24 [ Tue May 10, 2011 4:45 pm ]
Post subject:  Re: 50hp tiller
I ran a 50 merc 2 stroke on a 1754 and it ran maybe mid 30's at most. I would say 32 constantly. The boat was a semi-v and it was a open floor plan. Had plenty of room and it was easy to fish and hunt out of. I wouldn't go any smaller , and would prolly go a foot longer if I had the choice.
Author:  CDMCHEVY07 [ Tue May 10, 2011 8:32 pm ]
Post subject:  Re: 50hp tiller
got a 2 stoke 50 hp yami on a 16ft express. will run a solid 40mph with just me in it! get atleast a 16ft boat. nothin smaller
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/