MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

gd surface drives are a joke,
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=24397
Page 1 of 4

Author:  justin123 [ Sun Nov 27, 2011 7:44 pm ]
Post subject:  gd surface drives are a joke,

i borrowed my buddys 27 hp gdsd this wk end it had just as much torque as a lt and u have to stand up and drive,,,wat is the point?? lol

Author:  Old School [ Sun Nov 27, 2011 7:45 pm ]
Post subject:  Re: gd surface drives are a joke,

Uh oh, this ought to get good :lol:

Author:  duckduckboom [ Sun Nov 27, 2011 7:53 pm ]
Post subject:  Re: gd surface drives are a joke,

your doing it wrong.

Author:  DeathMetalDukk [ Sun Nov 27, 2011 7:54 pm ]
Post subject:  Re: gd surface drives are a joke,

Popcorn's in the microwave-


This place has been dead as sht lately. This should help. :lol:

Author:  brasso [ Sun Nov 27, 2011 7:56 pm ]
Post subject:  Re: gd surface drives are a joke,

If you would have trailered it right that wouldent of happened.

Author:  take'emgator [ Sun Nov 27, 2011 7:57 pm ]
Post subject:  Re: gd surface drives are a joke,

Bend the trim knob up a little and it'll create an updraft and the boat should go faster. Just saying

Author:  oncall [ Sun Nov 27, 2011 7:59 pm ]
Post subject:  Re: gd surface drives are a joke,

In before page 3.. :lol:

Author:  jthib24 [ Sun Nov 27, 2011 8:02 pm ]
Post subject:  Re: gd surface drives are a joke,

Well being that I've owned both, I'll say that the sd is much easier to drive, and I definitely drive mine sitting down. Apparently you have no clue what you're talking about.

Author:  DeathMetalDukk [ Sun Nov 27, 2011 8:04 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  Quack Stackin [ Sun Nov 27, 2011 8:05 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  DeathMetalDukk [ Sun Nov 27, 2011 8:08 pm ]
Post subject:  Re: gd surface drives are a joke,

Giga is copy/pasting threads as we speak-



Boy Wonder, you better get the GD beacon going!

Author:  med [ Sun Nov 27, 2011 8:11 pm ]
Post subject:  Re: gd surface drives are a joke,

Seeing as how yur having to borrow someone else's motor why bitch. Poor thing, a little tiller torque has him all fucked up.

You must have been doing something wrong. My 27 runs just as easy as the 31mb I used to own.

Author:  keystone light [ Sun Nov 27, 2011 8:13 pm ]
Post subject:  Re: gd surface drives are a joke,

They should take the starter off so there's less to break. Just spin the prop like a old airplane to start them. So much more reliable. :lol:

Author:  med [ Sun Nov 27, 2011 8:22 pm ]
Post subject:  Re: gd surface drives are a joke,

Justin I was just messing with yu bro. They are a little more difficult to run since it doesn't have piwer trim but that's all I've noticed. I really like it. Lot of folks talk trash about em but that's no biggie. I'm not afraid to drive mine anywhere in regards to the dependability.

I may sell mine next yr tho and get a prodrive. Id really like to have reverse. Nothing against GD at all and you wont hear me bashing them. Probably would have bought pd in the bwginning had I known the skeg could be altered.

Author:  Robn1020 [ Sun Nov 27, 2011 8:24 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  TX Aggie '06 [ Sun Nov 27, 2011 9:03 pm ]
Post subject:  Re: gd surface drives are a joke,

Owned a PD, Own a MB, Have driven a GDSD, Capitalize after commas...they are all fun to drive!

Buy a motor then bitch about it...until then its like bitching about the president when you dont vote. :mrgreen:

Author:  Duckdon [ Mon Nov 28, 2011 9:54 am ]
Post subject:  Re: gd surface drives are a joke,

Some people just "get it"

Author:  Bayoublackhunter [ Mon Nov 28, 2011 9:58 am ]
Post subject:  Re: gd surface drives are a joke,

The only reason I stand up and drive us when im in big lilies or mud cuz I have to hold the handle up

Sent from my Evo 4G 3D

Author:  Gigafowl [ Mon Nov 28, 2011 11:59 am ]
Post subject:  Re: gd surface drives are a joke,


Author:  mw46 [ Mon Nov 28, 2011 12:07 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  WestEndAngler [ Mon Nov 28, 2011 12:30 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  mcnemar1982 [ Mon Nov 28, 2011 12:32 pm ]
Post subject:  Re: gd surface drives are a joke,

Ding Ding Ding!!!! :lol:

Author:  cb5331 [ Mon Nov 28, 2011 12:46 pm ]
Post subject:  Re: gd surface drives are a joke,

You need to do this to get it to run right...

Author:  wal1809 [ Mon Nov 28, 2011 3:34 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  da go get'er [ Mon Nov 28, 2011 3:45 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  Robn1020 [ Mon Nov 28, 2011 3:49 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  Robn1020 [ Mon Nov 28, 2011 3:50 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  dog walker [ Mon Nov 28, 2011 4:06 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  mw46 [ Mon Nov 28, 2011 8:08 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  Robn1020 [ Mon Nov 28, 2011 8:44 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  justin123 [ Mon Nov 28, 2011 8:47 pm ]
Post subject:  Re: gd surface drives are a joke,

hahah i figured this would start some shit but i have had a pd and i currently own a gtr and if you have never run either of them and all u have run is a gdsd then ur livin in the dark because there a big pos. thats my opinion and im sure alot will favor in both ways but they are hard to drive if you have kicked back drank beer and driven the best. the reason i was borrrowin a his boat is because i was havin mine painted cant wait to get her back. i would rather push pole than run a go devil sd :lol:

Author:  mw46 [ Mon Nov 28, 2011 8:50 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  Woodiebuster [ Mon Nov 28, 2011 8:54 pm ]
Post subject:  Re: gd surface drives are a joke,

How is it you GD guys moving pins and wrapping tiller handles so you can drive it in grass, or not get beat to death in the stumps any better than a GT guy pulling a pin to trim down deeper?

Author:  Robn1020 [ Mon Nov 28, 2011 9:17 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  Quack Stackin [ Mon Nov 28, 2011 9:22 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  DeathMetalDukk [ Mon Nov 28, 2011 9:24 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  Robn1020 [ Mon Nov 28, 2011 9:34 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  dog walker [ Mon Nov 28, 2011 9:52 pm ]
Post subject:  Re: gd surface drives are a joke,

Only dumbasses need a tool set to drop a GTR lower.

All your speed didn't come stock or for free either Robin did it?

Author:  DeathMetalDukk [ Mon Nov 28, 2011 9:54 pm ]
Post subject:  Re: gd surface drives are a joke,


Author:  Robn1020 [ Mon Nov 28, 2011 10:14 pm ]
Post subject:  Re: gd surface drives are a joke,


Page 1 of 4 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/