| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Measurement https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=30376 |
Page 1 of 1 |
| Author: | nocemdead [ Fri Jun 29, 2012 9:29 am ] |
| Post subject: | Measurement |
Hey guys need some help. Building my trailer up for the new boat and wondering what measurement to have the boat at for ride height. GTR 35 motor. What measurement do I need from the bottom rear of my boat hull to the ground loaded on the trailer? |
|
| Author: | rob_E [ Fri Jun 29, 2012 9:36 am ] |
| Post subject: | Re: Measurement |
from the ground to the top of the bunks/bottom of the boat on my trailer is 24" |
|
| Author: | nocemdead [ Fri Jun 29, 2012 10:15 am ] |
| Post subject: | Measurement |
K.. Rookie question motor trimmed down with hauling strap on how far below the bottom is the skag or prop. |
|
| Author: | rob_E [ Fri Jun 29, 2012 10:41 am ] |
| Post subject: | Re: Measurement |
with the motor trimmed down into the trailering bracket my skeg and prop is 16" from the ground so 8" lower |
|
| Author: | nocemdead [ Fri Jun 29, 2012 1:31 pm ] |
| Post subject: | Measurement |
Perfect thanaks |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|