| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| GTR Reverse https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=3192 |
Page 1 of 1 |
| Author: | slambin [ Tue Jul 14, 2009 1:29 pm ] |
| Post subject: | GTR Reverse |
Is it regular DOT 3 fluid that needs to go in the reverse lever. My lever is starting to touch the tiller when i use reverse. Also will i have to bleed out the lines or just add more fluid to resivoir. |
|
| Author: | coondik [ Tue Jul 14, 2009 1:30 pm ] |
| Post subject: | Re: GTR Reverse |
| Author: | deltaduckmaster [ Tue Jul 14, 2009 4:44 pm ] |
| Post subject: | Re: GTR Reverse |
| Author: | coondik [ Tue Jul 14, 2009 11:00 pm ] |
| Post subject: | Re: GTR Reverse |
get a 3 blade! |
|
| Author: | MaXXis85 [ Wed Jul 15, 2009 8:43 am ] |
| Post subject: | Re: GTR Reverse |
When I pass by ur house again I can take a look at it. Pull the belt housing cover off and look at both pads at rest. They should be about 1/16" ish from the rotor. if they are further than that you need to adjust the pads. if they are within spec, we gonna have to add fluid and bleed it. Did i mention i hate bleeding fluids. |
|
| Author: | slambin [ Wed Jul 15, 2009 9:39 am ] |
| Post subject: | Re: GTR Reverse |
checked it yesrterday. pads need to be adjusted |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|