MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

2000 gph bilge pump
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=41178		 Page 1 of 1
Author:  renovator [ Tue May 28, 2013 7:04 pm ]
Post subject:  2000 gph bilge pump
If your boat has this profile with a big engine, and you run deep water to get to shallow water. Then you should know why its needed :D
Author:  Fletch [ Tue May 28, 2013 7:18 pm ]
Post subject:  Re: 2000 gph bilge pump
Wish I would have gotten bigger. I have the 500.
Author:  renovator [ Tue May 28, 2013 7:23 pm ]
Post subject:  Re: 2000 gph bilge pump
Almost sunk twice with a 750. Now its 2000 and nothing less.
Author:  Bigrich [ Tue May 28, 2013 7:26 pm ]
Post subject:  Re: 2000 gph bilge pump
I was gonna do that but I went with dual 1100's that way if one goes out I still have a back up
Author:  renovator [ Tue May 28, 2013 7:34 pm ]
Post subject:  Re: 2000 gph bilge pump
Thought of that but I wanted something with a big impeller to help cut/pass grass and mud.
Author:  Bigrich [ Tue May 28, 2013 7:45 pm ]
Post subject:  Re: 2000 gph bilge pump
Yeah that's a good idea for sure! My shit never seems to work right so always need a spare!
Author:  renovator [ Tue May 28, 2013 7:49 pm ]
Post subject:  Re: 2000 gph bilge pump
:lol: My shit always worked until grass hit it :D
Author:  Bigrich [ Tue May 28, 2013 8:08 pm ]
Post subject:  Re: 2000 gph bilge pump
Sticks would b my issue
Author:  Bigrich [ Tue May 28, 2013 8:16 pm ]
Post subject:  Re: 2000 gph bilge pump
Damn buck brush is hard on shit
Author:  CootSlayerRMFT [ Tue May 28, 2013 8:20 pm ]
Post subject:  Re: 2000 gph bilge pump
Are all PD tiller handles that long?!
Author:  jordy [ Tue May 28, 2013 8:22 pm ]
Post subject:  Re: 2000 gph bilge pump
No, definitely am extension on the tiller.
Author:  marsh chicken [ Tue May 28, 2013 8:52 pm ]
Post subject:  Re: 2000 gph bilge pump
Take some fine mesh and wrap it around the pump to keep the mud, grass, etc out of it. Works good
Author:  msm8281 [ Tue May 28, 2013 8:54 pm ]
Post subject:  Re: 2000 gph bilge pump
Author:  forever draggin [ Tue May 28, 2013 9:48 pm ]
Post subject:  Re: 2000 gph bilge pump
I got 2 tsunami 1200
Author:  forever draggin [ Tue May 28, 2013 10:28 pm ]
Post subject:  Re: 2000 gph bilge pump
I never had a problem. They sit a Lil higher and kind of have a screen to where it's actually pulling water instead of trash.
Author:  forever draggin [ Tue May 28, 2013 10:47 pm ]
Post subject:  Re: 2000 gph bilge pump
Ur welcome!
Author:  renovator [ Wed May 29, 2013 5:13 am ]
Post subject:  Re: 2000 gph bilge pump
Yes it has 12" extension. With the hunt deck I was sitting on the false transom to drive. That with a floating handle is nice. The impeller on the 2000 is giant compared to the 1100 -1200. It should be able to pass whatever gets pass the grate made into the base.
Author:  Prodigy [ Wed May 29, 2013 8:25 am ]
Post subject:  Re: 2000 gph bilge pump
Here is a setup i just did w 2 1500 manuals and a Bilge PumpSwitch Junior..........These dudes will sling some water................



Just be aware of the draw on the 2000 or 2 1500's.........big diff compared to the typical size bilges

http://store.waterpumpsupply.com/ru12vodcnobi.html
Author:  Bigrich [ Wed May 29, 2013 8:35 am ]
Post subject:  Re: 2000 gph bilge pump
I bet they do get rid of some water!
Author:  renovator [ Wed May 29, 2013 3:42 pm ]
Post subject:  Re: 2000 gph bilge pump
I have the led running lights and the manual bilge switch on a 15 amp fuse. And the auto switch is on a separate fuse.
Author:  idabilly [ Wed May 29, 2013 10:38 pm ]
Post subject:  Re: 2000 gph bilge pump
Have run a Rule 2000 on every mud boat I have ever owned.
Author:  Fletch [ Fri May 31, 2013 3:04 am ]
Post subject:  Re: 2000 gph bilge pump
You could use that as a jet drive pump. :)
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/