Well you already know the Color was gunna be that
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| who builds aluminum clutch covers? https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=42434 |
Page 1 of 3 |
| Author: | Orangefoot [ Mon Jul 01, 2013 10:15 pm ] |
| Post subject: | who builds aluminum clutch covers? |
Jus ordered my new rig and gettin a stage 1 with a crossover so I need an aluminum clutch cover made. So anybody making em? |
|
| Author: | Brady [ Mon Jul 01, 2013 10:32 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
You will be fine with the plastic one , i still have my stock plastic cover over 3 years old |
|
| Author: | CootSlayerRMFT [ Tue Jul 02, 2013 12:03 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
^ Doesn't seem helpful. |
|
| Author: | Rocketman [ Tue Jul 02, 2013 2:46 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Brady I thought you had a MM exhaust?? PM takem mark and talk to him. |
|
| Author: | deltaduckmaster [ Tue Jul 02, 2013 5:34 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
800 hrs between my 2 motors same covers. 600 on my single same cover. You use the reverse lever right you won't have issues. If your cover is getting hot not only are you fucking up your cover you ain't getting full reverse!! |
|
| Author: | bbarras85 [ Tue Jul 02, 2013 5:38 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | Rocketman [ Tue Jul 02, 2013 6:05 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
I'm pretty sure this has to to with the heat from a "Crossover" exhaust |
|
| Author: | Team Camo [ Tue Jul 02, 2013 6:24 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
The MM should have a heat shield on the bottom barrel. The Crossover outlet points right at the top corner of the cover, sometimes causing it to melt. Takem no longer does the covers, at least that's what I've heard. Instagator911 was planning some, not sure if it's still on the table or not. |
|
| Author: | Rocketman [ Tue Jul 02, 2013 6:32 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | Rocketman [ Tue Jul 02, 2013 6:34 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | take'emgator [ Tue Jul 02, 2013 7:03 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | Brady [ Tue Jul 02, 2013 7:09 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
I do have mm exhaust and mine has not melted off . All I'm saying is some ppl think they need them all I'm saying is you don't |
|
| Author: | Brady [ Tue Jul 02, 2013 7:16 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
I drilled the holes bigger and added two holes in the middle it guess that allow more heat out of it |
|
| Author: | take'emgator [ Tue Jul 02, 2013 7:21 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Brady to be honest if your making heat in there, something isn't right. |
|
| Author: | OwenDickeson [ Tue Jul 02, 2013 8:16 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
How was your EVT melting your cover??? |
|
| Author: | Brady [ Tue Jul 02, 2013 8:20 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
I not making heat I still have my stock cover , just to be precautionary is why there are extra holes |
|
| Author: | take'emgator [ Tue Jul 02, 2013 8:21 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
It only really affected it on very long consistent running but it did melt it, just from the main barrel |
|
| Author: | OwenDickeson [ Tue Jul 02, 2013 8:40 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Must have had other issues, been running mine 4-5 hours at a time with no problems. |
|
| Author: | take'emgator [ Tue Jul 02, 2013 8:44 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
hmmm could have |
|
| Author: | dog walker [ Tue Jul 02, 2013 9:21 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
I bought an aluminum cover and sold it without putting it on. I've had clutch cover issues but none from reverse. The first cover took a direct impact from someone's bow at a ride. The other time I had an exhaust malfunction that did a number on the cover. |
|
| Author: | CLICKSTER [ Tue Jul 02, 2013 9:24 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
now on the 23 thats a different story. with the crossover and the shorter block its melts the cover in a hurry. |
|
| Author: | Orangefoot [ Tue Jul 02, 2013 5:50 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Problem solved, got a buddy that's gonna whip up a batch from the design of "rocketman" cover. |
|
| Author: | Gtr18x42 [ Tue Jul 02, 2013 6:41 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | Brady [ Tue Jul 02, 2013 7:08 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
This is how you get one made bring your plastic one to a fab shop it's not rocket science any fitter can make them for you |
|
| Author: | Brady [ Tue Jul 02, 2013 7:11 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Well I always see threads that say where can I find an aluminum cover it's not hard just bring to local shop |
|
| Author: | Gtr18x42 [ Tue Jul 02, 2013 7:13 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | Gtr18x42 [ Tue Jul 02, 2013 7:16 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Been trying to avoid the welding machine with this hot ass weather |
|
| Author: | Brady [ Tue Jul 02, 2013 7:17 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
If I could weld i'dmake some they always looking for them on here |
|
| Author: | Gtr18x42 [ Tue Jul 02, 2013 7:41 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Might try make one |
|
| Author: | Bigrich [ Tue Jul 02, 2013 7:58 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Been saying I'm going to but haven't got motivated enough too. |
|
| Author: | 1st-n-last59 [ Tue Jul 02, 2013 9:02 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
For the amount of time it would take to build some covers, its gonna b hard to don't someone to make em and sell. I'm guessing that's why the last guy stopped making them. They are nice to have just cause they look better I think than the stock one. GT should just build em and put em on stock. Would make life a lot easier for alot of people. |
|
| Author: | Brady [ Tue Jul 02, 2013 9:08 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | forever draggin [ Tue Jul 02, 2013 9:16 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
I was goin to the camp and a beg fell on the foot pedal, I didn't notice till I turned around and the cover had 2' flames on it I can make a cover if I had one to gt measurements from |
|
| Author: | forever draggin [ Tue Jul 02, 2013 9:21 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Wait don't nail it I'm sure I know someone with a gtr |
|
| Author: | forever draggin [ Tue Jul 02, 2013 9:21 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | Brady [ Tue Jul 02, 2013 9:22 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
I have an idea in my head to make the design look sweet instead of a square cover, I'll work on it to make sure the clearances are right |
|
| Author: | Team Camo [ Tue Jul 02, 2013 9:22 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | Brady [ Tue Jul 02, 2013 9:43 pm ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Well you already know the Color was gunna be that
|
|
| Author: | Rocketman [ Wed Jul 03, 2013 5:37 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
| Author: | Brady [ Wed Jul 03, 2013 6:44 am ] |
| Post subject: | Re: who builds aluminum clutch covers? |
Really ?? Must have a low iq? Read the title of this thread ! Obviously ppl don't know how to get them build or where to go |
|
| Page 1 of 3 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|