| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 14-42 with 23 dixie? https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=46430 |
Page 1 of 1 |
| Author: | Will B Free [ Tue Oct 15, 2013 8:14 pm ] |
| Post subject: | 14-42 with 23 dixie? |
Hey guys I got a 14-42 Alumacraft rivited Jon with a 12 hp copperhead. I'm thinking about up grading hp. Would a 23 dixie work as far as weight and what not. According to Dixie's and copperhead's website, the dixie only ways 20 pounds more which I find hard to believe. Also are these motors durable at all? New ownership makes me think bad things. |
|
| Author: | rudyeng [ Tue Oct 15, 2013 8:36 pm ] |
| Post subject: | Re: 14-42 with 23 dixie? |
I had a 23 Dixie on a 1442 Almacraft. I braced the transom and added small trim tabs.(bent Stainless 8"x10") My setup was awesome. I really liked my Dixie. I had the latest generation. manual and no clutch. very easy to work on . Great starter motor. I would not recommend anything over 23 on a Dixie. Make sure you balance your prop. You may also want to consider the big 3 as an alternative. Not sure if Mike got the bugs worked out yet. Best of luck ! |
|
| Author: | btmannin [ Tue Oct 15, 2013 8:38 pm ] |
| Post subject: | Re: 14-42 with 23 dixie? |
Welcome to the forum, below you will find a link explaining one of many terrible experiences with dixie. Stick with copperhead, i've heard one bad review of a copperhead ever. Some have had a couple belt issues, but for the most part they are extremely reliable, and simple in design. Don't take my word for it though, Google search "Mudmotortalk dixie mud motors" and see for yourself. viewtopic.php?f=5&t=41548 |
|
| Author: | Will B Free [ Wed Oct 16, 2013 6:02 am ] |
| Post subject: | Re: 14-42 with 23 dixie? |
I appreciate the insight. My buddy has 2012 and has had all kind of problems but that it only one person's experience. That price tag is so nice though it's clouding my thoughts |
|
| Author: | diddyduck [ Wed Oct 16, 2013 6:11 am ] |
| Post subject: | Re: 14-42 with 23 dixie? |
forget dixie..that price tag will fuk you when you have to buy a 2nd motor look at copperhead for that size boat |
|
| Author: | Duck320 [ Wed Oct 16, 2013 6:53 am ] |
| Post subject: | Re: 14-42 with 23 dixie? |
Definitely stay away from Dixie. The new owner is as bad as the old. WTF is in the drinking water down there? |
|
| Author: | 625browning [ Wed Oct 16, 2013 5:16 pm ] |
| Post subject: | Re: 14-42 with 23 dixie? |
Haven't had any problems with my 23, but if you look on you will see that everybody has issues no matter who built it. |
|
| Author: | Johnny-O [ Fri Oct 18, 2013 1:43 pm ] |
| Post subject: | Re: 14-42 with 23 dixie? |
| Author: | USCG4X4 [ Fri Oct 18, 2013 5:08 pm ] |
| Post subject: | Re: 14-42 with 23 dixie? |
I'm running a 1442 NCS alumacraft with a 25 hp Orion. Guessing it weighs about 175 or so and it works great. I'm running 24 mph by myself and high teens with two people and hunt load. |
|
| Author: | Bigbuckfever [ Fri Oct 18, 2013 7:03 pm ] |
| Post subject: | Re: 14-42 with 23 dixie? |
| Author: | waterfowl1 [ Tue Oct 22, 2013 10:38 am ] |
| Post subject: | Re: 14-42 with 23 dixie? |
i run a 15hp orion sd on my 1432 jon rivet boat. 170lb me, dog, deeks, and gear i run about 18-20 mph. bout 50hrs on it. only issue were the tabs that bolt the shaft to the skeg cracked. |
|
| Author: | Will B Free [ Tue Oct 22, 2013 5:03 pm ] |
| Post subject: | Re: 14-42 with 23 dixie? |
Sounds like a sweet rig waterfowl1. I think these motors are on the rise |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|