has anyone cut the handle on their motors and centered it i'm having to reach for it thought i might try and center it in front of trim motor cover.
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| handle on gatortail motors https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=48806 |
Page 1 of 2 |
| Author: | jim mitchell [ Thu Jan 02, 2014 9:27 pm ] |
| Post subject: | handle on gatortail motors |
| has anyone cut the handle on their motors and centered it i'm having to reach for it thought i might try and center it in front of trim motor cover.
|
|
| Author: | msm8281 [ Thu Jan 02, 2014 9:40 pm ] |
| Post subject: | Re: handle on gatortail motors |
It would be a lot easier to learn where the handle is then to try to move over 4 inches. |
|
| Author: | North LA Hunter [ Thu Jan 02, 2014 9:41 pm ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | cupped up [ Thu Jan 02, 2014 9:45 pm ] |
| Post subject: | Re: handle on gatortail motors |
Any particular reason you can't just stand or sit a little closer to the center of the boat? This thread confuses me some.. |
|
| Author: | msm8281 [ Thu Jan 02, 2014 9:46 pm ] |
| Post subject: | Re: handle on gatortail motors |
How long are your arms? |
|
| Author: | Old School [ Thu Jan 02, 2014 9:47 pm ] |
| Post subject: | Re: handle on gatortail motors |
This should be good... 
|
|
| Author: | Trousertrout [ Thu Jan 02, 2014 10:03 pm ] |
| Post subject: | Re: handle on gatortail motors |
Were your parents T-REXES 
|
|
| Author: | Old School [ Thu Jan 02, 2014 10:07 pm ] |
| Post subject: | Re: handle on gatortail motors |
I think u should try it and let us know how it works out. |
|
| Author: | msm8281 [ Thu Jan 02, 2014 10:16 pm ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | diddyduck [ Thu Jan 02, 2014 10:25 pm ] |
| Post subject: | Re: handle on gatortail motors |
| mmt at its finest
|
|
| Author: | Trousertrout [ Thu Jan 02, 2014 10:29 pm ] |
| Post subject: | Re: handle on gatortail motors |
Just pissed a little
|
|
| Author: | missile [ Fri Jan 03, 2014 3:49 am ] |
| Post subject: | Re: handle on gatortail motors |
Funny shit right there |
|
| Author: | Will [ Fri Jan 03, 2014 6:10 am ] |
| Post subject: | Re: handle on gatortail motors |
Y'all are fucking wrong, you'll probably get in a wreck today and loose your left arm now. Instead of cutting it off and moving it over, remove it and have an offset bent into it. |
|
| Author: | Frog [ Fri Jan 03, 2014 6:30 am ] |
| Post subject: | Re: handle on gatortail motors |
This syndrome is know as "alligator arms", I ve seen this on several occasions when some of my friends reach for the bill or their wallet during breakfast , sad really. What Will said^^^ 
|
|
| Author: | dixieducker [ Fri Jan 03, 2014 7:24 am ] |
| Post subject: | Re: handle on gatortail motors |
subscribed. haha |
|
| Author: | MNGunner [ Fri Jan 03, 2014 8:29 am ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | jim mitchell [ Fri Jan 03, 2014 9:24 am ] |
| Post subject: | Re: handle on gatortail motors |
thanks for the wonderful replies thought i might get some intelligent replies but after seeing what some of you put on this website i should have figured i would get those type of replies. not talking about everyone 
|
|
| Author: | Trousertrout [ Fri Jan 03, 2014 9:26 am ] |
| Post subject: | Re: handle on gatortail motors |
Anytime bro. These guys are really immature on here. I wish they would grow up already |
|
| Author: | lunacris [ Fri Jan 03, 2014 9:31 am ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | OwenDickeson [ Fri Jan 03, 2014 9:51 am ] |
| Post subject: | Re: handle on gatortail motors |
Are you trying to make it easier to sit down and drive? Is your boat pretty wide or something? |
|
| Author: | deltaduckmaster [ Fri Jan 03, 2014 10:37 am ] |
| Post subject: | Re: handle on gatortail motors |
A surface drive needs to be driven pretty much in the front the tiller instead of on side. |
|
| Author: | North LA Hunter [ Fri Jan 03, 2014 10:51 am ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | deltaduckmaster [ Fri Jan 03, 2014 10:58 am ] |
| Post subject: | Re: handle on gatortail motors |
Biggest contributor to tiller tork. People who get a box built to sit and drive. You start out with a very unbalanced boat. |
|
| Author: | Will [ Fri Jan 03, 2014 11:00 am ] |
| Post subject: | Re: handle on gatortail motors |
not if you put weight on the other side to balance it out. |
|
| Author: | North LA Hunter [ Fri Jan 03, 2014 11:01 am ] |
| Post subject: | Re: handle on gatortail motors |
I'm guessing if you have a wide boat with a skinny seat then your handle will be further away from you. I don't really know because I've never been in anything wider than a 48. So instead of modifying you motor just put a seat base on the edge of your seat and put a seat in it or put a wider seat in your boat to get closer to your motor. Sent from my beeper |
|
| Author: | Will [ Fri Jan 03, 2014 11:06 am ] |
| Post subject: | Re: handle on gatortail motors |
This sure is a one way conversation, think the JA's ran the poor feller off with the first few comments..
|
|
| Author: | banded-mallard [ Fri Jan 03, 2014 11:11 am ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | Bigrich [ Fri Jan 03, 2014 11:13 am ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | prodrivinggatortail [ Fri Jan 03, 2014 11:17 am ] |
| Post subject: | Re: handle on gatortail motors |
Could always trade it off for one of those new MB. The handle is usually on the floor, where you could just pick it up when you want it. |
|
| Author: | North LA Hunter [ Fri Jan 03, 2014 12:10 pm ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | cr244 [ Fri Jan 03, 2014 1:03 pm ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | 4Cody4 [ Fri Jan 03, 2014 1:08 pm ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | Will [ Fri Jan 03, 2014 1:20 pm ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | diddyduck [ Fri Jan 03, 2014 1:54 pm ] |
| Post subject: | Re: handle on gatortail motors |
sit on the other side! 
|
|
| Author: | deltaduckmaster [ Fri Jan 03, 2014 2:08 pm ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | MNGunner [ Fri Jan 03, 2014 2:12 pm ] |
| Post subject: | Re: handle on gatortail motors |
| Author: | fowllife08 [ Fri Jan 03, 2014 2:17 pm ] |
| Post subject: | Re: handle on gatortail motors |
Baha |
|
| Author: | Will [ Fri Jan 03, 2014 2:34 pm ] |
| Post subject: | Re: handle on gatortail motors |
If the little'n can do it....viewtopic.php?f=3&t=39486 To add, I guess it's imfukinpossible to drive a side console, that sob will be doin nothing but circles! |
|
| Author: | cupped up [ Fri Jan 03, 2014 5:33 pm ] |
| Post subject: | Re: handle on gatortail motors |
Don't bring circles into this... |
|
| Author: | jim mitchell [ Fri Jan 03, 2014 7:01 pm ] |
| Post subject: | Re: handle on gatortail motors |
I'll try to answer all your questions from my post 1648 with bench set in back just moved battery up front centered moved fuel tank up front opposite from where I sit. Had grab bar to far forward moved it today . transom brace in center of seat after moving battery I can now stradle seat and sit or stand to run . going from Lt to GTR25 was a big change . Don't play in deep mud run shallow river with alot of under water stumps and hard mud and sand . THANKS AGAIN FOR THE REPLIES I RECEIVED  . AIN'T NOBODY RUNNING ME OFF
|
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|