MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

mud motor weight on wood transom
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=50166
Page 1 of 1

Author:  jimsmith2003 [ Sat Feb 08, 2014 7:34 pm ]
Post subject:  mud motor weight on wood transom

i have a 15 foot jon boat with a wood transom i was wondering if putting a 23 hp mini mudbuddy motor on there would wear out the wood transom. also has anyone put on the beaver tail pods on the back of there jon boat

Author:  Hernaja1 [ Sun Feb 09, 2014 2:18 am ]
Post subject:  Re: mud motor weight on wood transom

I wouldn't do it . To much wieght and torgue

Author:  brickgw [ Sun Feb 09, 2014 7:02 am ]
Post subject:  Re: mud motor weight on wood transom

When you say wood transom are you saying that its all wood an no aluminum or just a wood core? I had to rebuild the transom in my Jon boat last spring and I beefed it up. It's got a wood core and its holding up to my 36 pd real good.

Author:  jimsmith2003 [ Wed Feb 12, 2014 1:28 pm ]
Post subject:  Re: mud motor weight on wood transom

Its a wood core

Author:  North LA Hunter [ Wed Feb 12, 2014 1:51 pm ]
Post subject:  Re: mud motor weight on wood transom


Author:  Hernaja1 [ Wed Feb 12, 2014 6:02 pm ]
Post subject:  Re: mud motor weight on wood transom

If ur not using the motor what it's meant for ( going through mud ) then ur fine. If it goin through a lot of mud good luck. Mud boat are thicker then standard aluminum boats for a reason.

Author:  Puddler45 [ Thu Feb 13, 2014 2:50 pm ]
Post subject:  Re: mud motor weight on wood transom

I ran a 23 MB HD on my 14' lowe with a wood core transom I reinforced the transom I put it through its paces jumpin muskrat huts hittin logs breaking ice ect and had no problem but I only ran it one season. Just rock what you got until you can afford a better boat. I used aluminum angle iron attached to rear seat and transom and ran some square tubing for supports to tie it all together.

Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/