|
|
FAQ
• Login
|
|
It is currently Tue Jul 15, 2025 2:32 pm
|
|
Page 1 of 1
|
[ 11 posts ] |
|
| Author |
Message |
|
Alweld1448
MMT Member
Joined: Fri Sep 14, 2012 6:54 pm
Posts: 27
|
 GTR shims Does anyone know what size shims gator tail sends out? I need to tighten my belt and looking for some shims locally. Will any shim work as long as the belt tension is right? Or does anyone in the Slidell area have some that would get rid of? Also I know my belt is loose and would the belt being loose make it walk back and forth on the gear? thanks
|
| Fri Feb 14, 2014 9:08 am |
|
|
|
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
|
Re: GTR shims I would think any shim material would work
|
| Fri Feb 14, 2014 9:28 am |
|
|
|
Nate
MMT Pro Member
Joined: Sun Jun 17, 2012 1:30 pm
Posts: 425
Location: Houma, LA
|
Re: GTR shims Most the shims i have seen used are maybe 1/16 at the most but thats all gonna depend on how loose you are....the belt moving on the gear is normal to a certain extent
_________________
1944 skiff with 35 GTR
|
| Fri Feb 14, 2014 9:37 am |
|
|
|
Old School
MMT 1000 Club
Joined: Thu Dec 17, 2009 9:44 pm
Posts: 3067
Location: Earth
|
Re: GTR shims Bayou boy put washers on mine.
_________________
Gator tail
|
| Wed Feb 19, 2014 1:19 pm |
|
|
|
Richard in LA
MMT Pro Member
Joined: Tue Sep 08, 2009 1:58 am
Posts: 282
Location: Prairieville, LA
|
Re: GTR shims Iirc, the set they sent me were .010", .020" and .030". I have also heard of people using large fender washers from the hardware store.
_________________
GTR, Waitin' on a DFOU hull
|
| Wed Feb 19, 2014 1:33 pm |
|
|
|
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am
Posts: 3673
Location: Prarieville,LA
|
Re: GTR shims cupped up had 30 thou under his from factory
_________________
1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
| Wed Feb 19, 2014 3:54 pm |
|
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5376
Location: Venice, La
|
Re: GTR shims
|
| Wed Feb 19, 2014 5:21 pm |
|
|
|
Old School
MMT 1000 Club
Joined: Thu Dec 17, 2009 9:44 pm
Posts: 3067
Location: Earth
|
Re: GTR shims My bad, my eyes deceived me. 
_________________
Gator tail
|
| Wed Feb 19, 2014 8:33 pm |
|
|
|
Gameover
MMT 1000 Club
Joined: Tue Jan 03, 2012 9:06 am
Posts: 3673
Location: Prarieville,LA
|
GTR shims About to say, bayou boy running a shady tree mechanic shop down there 
_________________
1754 GTR Xtreme CC w/ Purple Kool-aid Additives
Never Forget our Fallen Soliders
|
| Wed Feb 19, 2014 8:54 pm |
|
|
|
bayouboy
MMT Elite Member
Joined: Tue Jan 13, 2009 6:08 pm
Posts: 5376
Location: Venice, La
|
Re: GTR shims
|
| Thu Feb 20, 2014 7:36 am |
|
|
|
Alweld1448
MMT Member
Joined: Fri Sep 14, 2012 6:54 pm
Posts: 27
|
Re: GTR shims thanks guys. I went and found the ones at harbor freight and they worked out perfect and got plenty left over.
|
| Thu Feb 20, 2014 9:20 am |
|
|
|
|
|
Page 1 of 1
|
[ 11 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 120 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
