| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Mitschke https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=5646 |
Page 1 of 1 |
| Author: | richardb [ Mon Oct 26, 2009 9:39 am ] |
| Post subject: | Mitschke |
Mitschke Here is the Photo you wanted to see. I tried to PM it you but could not get the photo to place in the pm. The K&N Filter number on the top is B030A4. Hopefully this helps pm me and we can go from their. Richardb IMG00137.jpg |
|
| Author: | Duck Diggler [ Mon Oct 26, 2009 4:46 pm ] |
| Post subject: | Re: Mitschke |
what is the cost for the mount, cover and the filter for a 36 PD? |
|
| Author: | forever draggin [ Mon Oct 26, 2009 5:54 pm ] |
| Post subject: | Re: Mitschke |
can u post a pic of it on ur motor? |
|
| Author: | duckmananderson [ Tue Oct 27, 2009 3:07 pm ] |
| Post subject: | Re: Mitschke |
Are you selling it ? |
|
| Author: | richardb [ Tue Oct 27, 2009 3:23 pm ] |
| Post subject: | Re: Mitschke |
I had one of the old Donaldson air filter set up’s on my MB. But for a while I took off the Donaldson air filter and just ran a K&N. But I have changed it to the new air filter stile that looks like a BBQ grill. This is the adapter off the carburetor from the Donaldson air filter. I am selling it but Mitschke has already said he wanted it. But wanted to see a pic and he has not returned my pm yet. |
|
| Author: | richardb [ Tue Oct 27, 2009 4:57 pm ] |
| Post subject: | Re: Mitschke |
It looks like Mitschke is not interested anymore so this is for sale. If any one wants it. $40 plus shipping. The K&N filter is only 2 months old. |
|
| Author: | duckmananderson [ Wed Oct 28, 2009 5:41 am ] |
| Post subject: | Re: Mitschke |
I'm realy interested would it bolt right on my 08 vangard 35hp mb ? and did you see much of a change when you had it on your motor compaired to your stock air filter ? Thanks |
|
| Author: | richardb [ Wed Oct 28, 2009 11:26 am ] |
| Post subject: | Re: Mitschke |
It should fit as long as you have the stock carb. It will let your motor breath better and help performance. I also have the top cover that MB sells for this set up to cover the top of the motor. If you look at the top of the motor in this pic you can see the set up. db 006.jpg |
|
| Author: | duckmananderson [ Wed Oct 28, 2009 2:33 pm ] |
| Post subject: | Re: Mitschke |
do you have any more pic's of it on your motor ? And what do we need to do for shipping i'm in MN ? |
|
| Author: | richardb [ Wed Oct 28, 2009 5:15 pm ] |
| Post subject: | Re: Mitschke |
duckmananderson, just PM you my number i get off work in 45 min. |
|
| Author: | duckmananderson [ Wed Oct 28, 2009 8:26 pm ] |
| Post subject: | Re: Mitschke |
Ok thanks i will look at the pic's when you get them up. When i put this on do i need to do anything else to the motor ? Will be in touch. Thanks alot. |
|
| Author: | richardb [ Thu Oct 29, 2009 11:45 am ] |
| Post subject: | Re: Mitschke |
Duckmananderson, I have attached some more photos of the setup on my boat it’s not a very good pic but all I have and a pic of the MB motor cover. Give me a call and let me know if you want. I am selling the motor cover for $40 as well. duck boat 011.jpg Boat 010.jpg |
|
| Author: | duckmananderson [ Thu Oct 29, 2009 6:40 pm ] |
| Post subject: | Re: Mitschke |
When i put it on do i need to do anything else to the motor ? Can we work out a deal for the air filter and motor cover ? |
|
| Author: | richardb [ Fri Oct 30, 2009 8:41 am ] |
| Post subject: | Re: Mitschke |
duckmananderson, you don't have to do anything to else to the motor. give me a call and we can work something out. Richard |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|