| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| which setup https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=5744 |
Page 1 of 1 |
| Author: | boatr37 [ Fri Oct 30, 2009 12:06 pm ] |
| Post subject: | which setup |
i'am in the market for a rig, i'am not wanting to start arguments just want some opinions, i like the 16ft boat range but what boat? What size motor? would be yalls choice for a 16ft boat, surface drive,or long tail. this would not be my primary boat, i have others but really want a mud boat. I live between mobile and pensacla fla., where it is mainly mud and grass |
|
| Author: | marsh bandit [ Fri Oct 30, 2009 12:32 pm ] |
| Post subject: | Re: which setup |
35 hp surface drive. Doesn't matter which brand... Which ever you prefer. |
|
| Author: | richardb [ Fri Oct 30, 2009 12:39 pm ] |
| Post subject: | Re: which setup |
x2 |
|
| Author: | boatr37 [ Fri Oct 30, 2009 12:47 pm ] |
| Post subject: | Re: which setup |
what about boat brand? and the ideal width, remember i want a 16ft boat |
|
| Author: | slambin [ Fri Oct 30, 2009 1:03 pm ] |
| Post subject: | Re: which setup |
What kind of load you looking to put in it. Wider handles loads better. But if you hunt timber a 1648 or 1654 may be better. ACE has a 1660 Gator Tail boat that is really nice and does well. |
|
| Author: | boatr37 [ Fri Oct 30, 2009 1:19 pm ] |
| Post subject: | Re: which setup |
for as load i'am sure it would vary, no more than 3 adults, 2 most of the time, and a ice chest full of cold snackies, frog gigs or decoys |
|
| Author: | Ace [ Fri Oct 30, 2009 3:02 pm ] |
| Post subject: | Re: which setup |
If you're not gonna be in a lot of skinny trails, then go wide. I love my 1660. Redfishin, froggin, haulin lotsa shit to da camp, etc. Really like the room I have. |
|
| Author: | boatr37 [ Sat Oct 31, 2009 5:31 am ] |
| Post subject: | Re: which setup |
what brand is the preferred boat, in 16 ft. |
|
| Author: | dog walker [ Sat Oct 31, 2009 5:49 am ] |
| Post subject: | Re: which setup |
It really is a matter of personel preferance.Hulls made for mudmotors are your best bet for better performance with these motors. For me my next hull will be a gatortail extreme because of the way it handles.I want to be able to run wide open and turn when I want without the slide effect. If you are stuck on the 16' I would do as suggested and look at a wider boat for hauling loads. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|