MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

Painting Exhaust
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=6021		 Page 1 of 1
Author:  steve73 [ Sun Nov 15, 2009 8:21 am ]
Post subject:  Painting Exhaust
Wondering if anybody has tried it. I see Dupli-Color has a VHT Flame Proof paint rated for 2000F.
Author:  deadbird8 [ Sun Nov 15, 2009 10:50 am ]
Post subject:  Re: Painting Exhaust
See my post on the other forum. Don't waste your time, what sticks will turn light grey.
Author:  forever draggin [ Sat Apr 13, 2013 2:02 am ]
Post subject:  Re: Painting Exhaust
Did u bake it in the oven as suggested? J/w I heard great thins bout it
Author:  mud slinger 69 [ Sat Apr 13, 2013 6:14 am ]
Post subject:  Re: Painting Exhaust
I did mine with 1200 deg paint. I made sure to clean it really good before i painted it. Did 3 coats. It made it around 15 hrs before it started to burn off.
Author:  JIMMY W [ Sat Apr 13, 2013 6:40 am ]
Post subject:  Re: Painting Exhaust
nothing will stay on it!Don't waste your time ;)
Author:  pokey79 [ Sat Apr 13, 2013 6:46 am ]
Post subject:  Re: Painting Exhaust
ya'll dont think this would last???
http://www.jet-hot.com/coatings/jet-hot-extreme-2500/
Author:  deltaduckmaster [ Sat Apr 13, 2013 6:47 am ]
Post subject:  Re: Painting Exhaust
My question is why would you want it painted anyway.
Author:  pokey79 [ Sat Apr 13, 2013 6:53 am ]
Post subject:  Re: Painting Exhaust
i think black would look better than a rusty gold brown color!!!
Author:  dirtybird29+ [ Sat Apr 13, 2013 7:55 am ]
Post subject:  Re: Painting Exhaust
Waste of time and money !

Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Author:  DUCK HEARSE [ Sat Apr 13, 2013 7:58 am ]
Post subject:  Re: Painting Exhaust
Author:  BlueShamu [ Sat Apr 13, 2013 9:25 am ]
Post subject:  Re: Painting Exhaust
I have never tried it on a muffler, but there are high temp paint applications out there that work good for high temp. But, they are supposed to be applied at high temp >400 degrees F or they don't cure. Done it for high temp pipe in service.

There are also ceramic coatings made for process heater/furnace tubes. Don't know if they would hold up to vibration of a mud motor, though.


Sent using Morse Code from my not so smart phone.
Author:  lunacris [ Sat Apr 13, 2013 9:36 am ]
Post subject:  Re: Painting Exhaust
Even if the paint did stay, and it won't. The exhaust will break in time anyway. So you'll either have to get it welded, which would mess the paint up or buy a new one, and you back to square one.
Author:  JIMMY W [ Sat Apr 13, 2013 11:15 am ]
Post subject:  Re: Painting Exhaust
Hard headed fukers :evil:
Author:  jldsc [ Sat Apr 13, 2013 1:55 pm ]
Post subject:  Re: Painting Exhaust
ceramic coating will hold but expensive..check with your local powder coating company and see if they can do the black ceramic..if bot there are plenty places you can ship it too to get it coated..paint aint gonna hold!


Sent from my iPhone using Tapatalk
Author:  JIMMY W [ Sat Apr 13, 2013 5:13 pm ]
Post subject:  Re: Painting Exhaust
Author:  Bigrich [ Sun Apr 14, 2013 7:31 am ]
Post subject:  Re: Painting Exhaust
Yes jet hot will work no problem what it was made for
Author:  eljefe [ Sun Apr 14, 2013 7:37 am ]
Post subject:  Re: Painting Exhaust
would paint or ceramic coat or powder coat make the exhaust hotter? insulating it? seems the muffler would retain more heat.
Author:  cash [ Sun Apr 14, 2013 7:44 am ]
Post subject:  Re: Painting Exhaust
Author:  tchauvin [ Sun Apr 14, 2013 7:45 am ]
Post subject:  Re: Painting Exhaust
I painted mines with rustoleum high heat, 2000. It has held up, and is still black....Didnt burn off, but is starting to rust in a few spots.

Its the stainelss marine one, and i blasted it before i painted it.
Author:  eljefe [ Sun Apr 14, 2013 8:15 am ]
Post subject:  Re: Painting Exhaust
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/