| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| bike brake handle https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=60788 |
Page 1 of 1 |
| Author: | drake101 [ Mon Mar 16, 2015 9:07 am ] |
| Post subject: | bike brake handle |
Which bike brake handle would be best to change my stock throttle handle now on my 35 gtr?? |
|
| Author: | goodblasson [ Mon Mar 16, 2015 2:02 pm ] |
| Post subject: | Re: bike brake handle |
Clutch lever from bike shop is what I used on a past build.. |
|
| Author: | Russ [ Mon Mar 16, 2015 3:13 pm ] |
| Post subject: | Re: bike brake handle |
I used a clutch lever for a 90cc Honda dirtbike. Not sure if it's the right size for a gtr, but spacer can be added and material can be removed if necessary |
|
| Author: | Quack N Stack [ Mon Mar 16, 2015 5:28 pm ] |
| Post subject: | Re: bike brake handle |
Call gator tail and see if they can get you one. They come stock now on new motors |
|
| Author: | Dherndon [ Mon Mar 16, 2015 6:28 pm ] |
| Post subject: | Re: bike brake handle |
I upgraded to one and it was between 60-80$ |
|
| Author: | Russ [ Mon Mar 16, 2015 6:29 pm ] |
| Post subject: | Re: bike brake handle |
Mine was 7 bucks. It's worth trying to make it fit in my opinion. If it doesnt fit, oh well. |
|
| Author: | HSLPT0626 [ Wed Mar 25, 2015 10:26 am ] |
| Post subject: | Re: bike brake handle |
I tried using a Clutch Lever I got from the Honda dealership. Here are some problems I ran into : One on my 35 GDSD I had to destroy the factory plastic throttle lever to get the cable out of it. Once the Clutch lever was installed with a little grinding I found that it did not have enough "stroke" to reach WOT. So now what... I put my backup throttle cable and lever back on and ran it all weekend. This may have worked for other clutch levers but not in my application. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|