| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Gator trax boat cracked on transom weld https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=64438 |
Page 1 of 1 |
| Author: | Seand717 [ Thu Nov 05, 2015 12:13 pm ] |
| Post subject: | Gator trax boat cracked on transom weld |
I've got a 2010 gator trax boat and noticed yesterday that it was leaking water inside. The weld on the bottom of the transom motor plate is cracked all the way across. I sent them pictures and they told me because it's a 2010 and I'm the second owner even though I bought it in 2011 that they won't cover it. To me this is a bad weld or something. It's not about money to me it's about them standing behind their product. Has anybody else had one break here |
|
| Author: | TooTall [ Thu Nov 05, 2015 12:17 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Wow. That's kinda shitty of them.. |
|
| Author: | SETx Longtail [ Thu Nov 05, 2015 12:20 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
It would take less than an hour of their time to grind and reweld that spot and save a customer... Pretty messed up of them honestly. |
|
| Author: | Seand717 [ Thu Nov 05, 2015 12:20 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Great timing to with season opening in 2 days. |
|
| Author: | Seand717 [ Thu Nov 05, 2015 12:21 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
That's what I'm saying. He told me I could drive 5 hours there and pay $50 and they would fix it. |
|
| Author: | toddh [ Thu Nov 05, 2015 12:22 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
If you can start a thread on the Mud Buddy Site. I know Kent reads those post. Sent from my SM-G920V using Tapatalk |
|
| Author: | SCmudder7071 [ Thu Nov 05, 2015 12:27 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
And they pride themselves on a "lifetime warranty" |
|
| Author: | DBoone [ Thu Nov 05, 2015 12:30 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Hmm sounds like a crock of shit to me! I had a little trouble with their customer service while ordering my boat last year before season! It was close to piss poor! I'll probably be in a different brand boat next time! When I had my first gator Trax I talked with them for questions and everything was pretty but last year for the new was pretty bad! That's some terrible customer service on your part! Hope you get it worked out! |
|
| Author: | TonyGMcElroy [ Thu Nov 05, 2015 1:58 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Where u from? |
|
| Author: | Seand717 [ Thu Nov 05, 2015 2:11 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Dallas |
|
| Author: | jc [ Thu Nov 05, 2015 6:04 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Your best bet is to find someone local to fix it for you. It is very poor customer service on their part and I would tell anyone that I saw that was looking at their boats how they treated you. |
|
| Author: | Seand717 [ Thu Nov 05, 2015 6:39 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
I am pulling the motor off tonight and taking it somewhere tomorrow to get welded. I won't be buying another boat from them. The back of boat is bent right at the weld also. Almost like it's not thick enough metal on transom . I've never backed into anything with it just normal use for what it's supposed to be made for |
|
| Author: | TonyGMcElroy [ Thu Nov 05, 2015 7:19 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Well its still a long drive but if u don't get it fixed and get out this way I'll weld it up for you |
|
| Author: | flint87 [ Thu Nov 05, 2015 7:29 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
| Author: | flint87 [ Thu Nov 05, 2015 7:32 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
From the gator trax website : BFC Marine stands behind our Gator Trax aluminum boats and we warrant to any original owner that we will repair or replace, at our discretion, any hull found to be defective due to a manufacturing defect at no cost to the original purchaser for the first five (5) years. After 5 years, any repair due to a manufacturing defect will be made at a cost not to exceed $300 per incident to the original customer for the Lifetime of a BFC Marine Gator Trax aluminum boat. Sent from my iPhone using Tapatalk |
|
| Author: | stevietangles [ Thu Nov 05, 2015 7:55 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Be happy that it cracked at a weld. It's an easy fix. Def not covered by there expressed warranty. Never had an issue with the customer service Sent from my iPhone using Tapatalk |
|
| Author: | Seand717 [ Thu Nov 05, 2015 8:02 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Flint it's not about the money. But I would like to not have to spend money out of my pocket for a weld fail on their part. Atleast cover the cost of how much it's going to cost me. They put the orignail owner as just a escape route so they have to fix most boats. |
|
| Author: | flint87 [ Thu Nov 05, 2015 8:39 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
| Author: | Seand717 [ Thu Nov 05, 2015 9:49 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
So the previous owner did something 4 years ago and it just now shows up and breaks. No way in hell |
|
| Author: | brstanle [ Thu Nov 05, 2015 10:19 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
He's talking years of undue abuse, not one event that is now showing itself. |
|
| Author: | Will C [ Thu Nov 05, 2015 10:24 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Its a mudboat, shit happens. Fix it and roll on |
|
| Author: | cb5331 [ Thu Nov 05, 2015 10:34 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
| Author: | Seand717 [ Fri Nov 06, 2015 6:51 am ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
I am. Motor is off taking it to get welded today and gonna kill birds tomorrow. |
|
| Author: | flint87 [ Fri Nov 06, 2015 8:02 am ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
| Author: | shortsiding [ Sat Nov 07, 2015 9:04 am ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
| Author: | Migrator [ Sat Nov 07, 2015 10:54 am ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
As stated already, it's a surface drive. These boats take much more abuse than a normal aluminum boat. I have a gator trax with seven seasons on it. I have needed a little welding done from time to time. I live eight hours away from Springfield Louisiana now. I took the boat and had it welded and rolled out. Gator trax has always been helpful with any questions or issues that I have had. Sorry you feel like you were treated unfairly. Hope you got everything taken care of and made it out for your hunt. I now have a new custom boat but do not have anything negative to say about gator trax or their customer service. There are many options out there if you're not happy with them but bashing them on an Internet forum will only make you look bad. They will sell boats next year either way. Sent from my iPhone using Tapatalk |
|
| Author: | BlackRiverJosh [ Sat Nov 07, 2015 11:12 am ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
Kent and the people at Gator Trax go the extra mile in customer service. I know if I had a problem they would stand behind it...my boat is new and the warranty is in full force. For $50 bucks I would eat it and not even mention it. I would treat it as the price for beating my boat up in the swamp. If the transom fell off, I would give Kent a call and told him to expect it soon. $50...pay to play. Heck, with boats, sometimes it's more like $500 pay to play. |
|
| Author: | brstanle [ Sat Nov 07, 2015 10:27 pm ] |
| Post subject: | Re: Gator trax boat cracked on transom weld |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|