MudmotorTalk.com
https://www.mudmotortalk.com/mmt_v2/

Can anyone help?
https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=64682		 Page 1 of 1
Author:  Russ [ Mon Nov 23, 2015 12:35 pm ]
Post subject:  Can anyone help?
I pulled my starter off and found this:
20151123_115744.jpg

Do yall think I need to store my bow rope in a box? Or maybe need a new fuel pump? Or switch to royal purple? Or what size boat should i get?

I'm at at loss, need some help. ;)
Author:  jakehawk9 [ Mon Nov 23, 2015 12:37 pm ]
Post subject:  Re: Can anyone help?
Russ. I'd switch to 3 n 1. Or better yet run no oil so the heat from the engine will weld that shut

It's simple. get a mud motor. shoot ducks in the face.
Author:  Russ [ Mon Nov 23, 2015 12:39 pm ]
Post subject:  Re: Can anyone help?
I ran 3 in 1 in my old kawasaki, but it ran too cool that the plugs had ice around them after a long run.
Author:  brstanle [ Mon Nov 23, 2015 1:53 pm ]
Post subject:  Re: Can anyone help?
I think an Excel F93 1756 Royal Blurple Bow Rope Universal HD Detangler will do you well. I picked up 4 mph and can carry a 32 person hunt load no problem with it.
Author:  MaXXis85 [ Mon Nov 23, 2015 2:45 pm ]
Post subject:  Re: Can anyone help?
Nicely done!
Author:  duck_watcher12 [ Mon Nov 23, 2015 8:51 pm ]
Post subject:  Re: Can anyone help?
Just throw some silicone over it and you'll never know the difference
Author:  duckduckboom [ Mon Nov 23, 2015 9:01 pm ]
Post subject:  Re: Can anyone help?
thats like a engine hernia. just push it back in and keep rocking. i been doing that to mine for 3 years
Author:  cb5331 [ Mon Nov 23, 2015 9:05 pm ]
Post subject:  Re: Can anyone help?
:lol:
Author:  BlueShamu [ Mon Nov 23, 2015 9:28 pm ]
Post subject:  Re: Can anyone help?
I think you should have left your starter on.


Sent from my iPhone using Tapatalk
Author:  BlackRiverJosh [ Mon Nov 23, 2015 9:30 pm ]
Post subject:  Re: Can anyone help?
Put some caulk on it.
Author:  Wilson [ Mon Nov 23, 2015 11:32 pm ]
Post subject:  Re: Can anyone help?
Everyone knows JB Weld is the only thing that can fix that shit.
Author:  mudxxed [ Tue Nov 24, 2015 8:39 am ]
Post subject:  Re: Can anyone help?
That sucks man
Author:  Russ [ Tue Nov 24, 2015 10:15 am ]
Post subject:  Re: Can anyone help?
Well, the mechanic is a sheisty bastard, so what else could I expect. :D
Author:  North LA Hunter [ Tue Nov 24, 2015 12:54 pm ]
Post subject:  Re: Can anyone help?
I can weld it up and should be able to another hour or so out of it.


Sent from my iPhone using Tapatalk
Author:  Russ [ Tue Nov 24, 2015 2:58 pm ]
Post subject:  Re: Can anyone help?
Lmao
Author:  rob_E [ Tue Nov 24, 2015 5:01 pm ]
Post subject:  Re: Can anyone help?
I hate to kick a man while he is down but.....that's why you should have bought a Dixie
Author:  Russ [ Tue Nov 24, 2015 5:16 pm ]
Post subject:  Re: Can anyone help?
Would still have a Briggs on top....
Author:  SCSuperfly [ Thu Dec 03, 2015 10:27 pm ]
Post subject:  Re: Can anyone help?
How many RPM's did it take for that to happen? YIKES!
Author:  Russ [ Fri Dec 04, 2015 7:19 am ]
Post subject:  Re: Can anyone help?
Never turned more that 4800 except for a couple blips while on the trailer. At the time it did that, it was approximately 3900
Author:  scarygary [ Fri Dec 04, 2015 7:16 pm ]
Post subject:  Re: Can anyone help?
Nitrous oxide will do it every time


Sent from my iPhone using Tapatalk
Author:  Russ [ Fri Dec 04, 2015 8:40 pm ]
Post subject:  Re: Can anyone help?
Btw, props still coming, just don't do me any good until I can get it running right.
Author:  scarygary [ Fri Dec 04, 2015 9:03 pm ]
Post subject:  Re: Can anyone help?
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/