| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Steering Lock https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=66430 |
Page 1 of 1 |
| Author: | swanger011 [ Sat Apr 02, 2016 6:32 pm ] |
| Post subject: | Steering Lock |
For all the GTR tiller guys, when it comes to fishing, how do you guys lock your motor down so you can run your trolling motor without the ass end drifting around? Right now i am just tying a rope from each side of the boat to the tiller handle. It works, but it becomes a hassle when you have to run to different spots. Any other methods or suggestions? Thanks in advance |
|
| Author: | HOTSAUCE170 [ Sat Apr 02, 2016 8:23 pm ] |
| Post subject: | Re: Steering Lock |
Two bungee cords are quicker I've used those and they seemed to work and weren't much hassle Sent from denda this |
|
| Author: | swanger011 [ Sat Apr 02, 2016 8:26 pm ] |
| Post subject: | Re: Steering Lock |
10-4! thank ya |
|
| Author: | SETx Longtail [ Sat Apr 02, 2016 8:42 pm ] |
| Post subject: | Re: Steering Lock |
I just drop the quick trim down on my motor and let it follow the boat. I Don't lock it in the middle. Works fine. |
|
| Author: | Bigbuckfever [ Sun Apr 03, 2016 5:14 am ] |
| Post subject: | Re: Steering Lock |
I trim mine all the way down. It helps tracking (stern drift or whatever you want to call it) quite a bit. Stays straight too unless you hit something above or below the surface. Sent from my iPhone using Tapatalk |
|
| Author: | Delta1389 [ Fri Apr 15, 2016 8:49 am ] |
| Post subject: | Re: Steering Lock |
Yep all I do is trim down all the way and it stays put for the most part. |
|
| Author: | WhoDat88 [ Fri Apr 15, 2016 12:19 pm ] |
| Post subject: | Re: Steering Lock |
Trim it down |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|