| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| PD Guys https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=6783 |
Page 1 of 1 |
| Author: | keestan31 [ Sun Dec 27, 2009 9:34 pm ] |
| Post subject: | PD Guys |
Man what guage aluminum are the PD boats made out of?...We had to help a group of guys with there PD boat over the rollers into the hunting compartment and damn was that thang heavy!!!! I bet yall dont have to worry about it being damaged by any stumps. Not trying to start any arguments just wondering if they are made with a heavier aluminum than my gt? That was a very solid boat that they had. |
|
| Author: | keestan31 [ Sun Dec 27, 2009 9:37 pm ] |
| Post subject: | Re: PD Guys |
To top it off it was a group of young guys and after we helped them over the rollers they took off without saying thanks, set up too close to us and started firing shots in the air when we were working birds because they werent doing any shooting where they were. Man I was pissed but we hammered the birds so it made it better. |
|
| Author: | POKER1 [ Sun Dec 27, 2009 9:49 pm ] |
| Post subject: | Re: PD Guys |
They all made out the same stuff. .125 or 1/8" aluminum. Weights depends on how much of it (options) you add. |
|
| Author: | jn70549 [ Sun Dec 27, 2009 10:07 pm ] |
| Post subject: | Re: PD Guys |
Did you'll make them get out of the boat or they stayed in it? |
|
| Author: | Team Camo [ Sun Dec 27, 2009 10:37 pm ] |
| Post subject: | Re: PD Guys |
When we pulled up they were strugglin with it. Looked like they were tryin to pull an 18 wheeler up hill with a unicycle. Bein the good guys that we are,  , we bailed out of our boat & jumped in there to help out. As soon as they touched the water on the other side, they all 4 hopped in & hauled arse. We didn't need any help, but dang, would it have hurt em to at least offer? Wonder if that had anything to do with the whole PD vs GT thing.
|
|
| Author: | POKER1 [ Sun Dec 27, 2009 11:01 pm ] |
| Post subject: | Re: PD Guys |
Yeh, thats it. 
|
|
| Author: | coastal [ Sun Dec 27, 2009 11:27 pm ] |
| Post subject: | Re: PD Guys |
Thanks for the help.... PHAGS!!!!! 
|
|
| Author: | POKER1 [ Sun Dec 27, 2009 11:28 pm ] |
| Post subject: | Re: PD Guys |
| Author: | Team Camo [ Mon Dec 28, 2009 7:26 am ] |
| Post subject: | Re: PD Guys |
| Author: | take'emgator [ Mon Dec 28, 2009 8:12 am ] |
| Post subject: | Re: PD Guys |
| Author: | take'emgator [ Mon Dec 28, 2009 8:17 am ] |
| Post subject: | Re: PD Guys |
| Author: | Damon Silva [ Mon Dec 28, 2009 8:50 am ] |
| Post subject: | Re: PD Guys |
As stated above, itwas prolly a group of the younger generation!! I know have helped Rob over the rollers myself along with two other group of boaters and we were all in PD's and he rolled up with his MB. It ain't a mudmotor thing!! It's a lack of respect by most of the youth these days!!!!!! Rob do you remember the help you got going into 8 on opening morning of big duck season? |
|
| Author: | EasTexDux88 [ Mon Dec 28, 2009 9:14 am ] |
| Post subject: | Re: PD Guys |
First of all, I dont even know what the purpose of this post was in the first place.. Second, all yall SETX guys bring all this shit upon yalls self. The only reason everyone jacks with yall is cause stupid BS like this shit. Im sure the kind of motor those guys had hangin on the ass end of their boats had nothin to do with how they acted towards you. Theres a lot of jack asses out there and some of em may even own a GT... |
|
| Author: | The Shafer [ Mon Dec 28, 2009 9:38 am ] |
| Post subject: | Re: PD Guys |
| Author: | keestan31 [ Mon Dec 28, 2009 9:38 am ] |
| Post subject: | Re: PD Guys |
| Author: | EasTexDux88 [ Mon Dec 28, 2009 9:40 am ] |
| Post subject: | Re: PD Guys |
Yeah, i went back and read the FIRST post. I apologize... Its just all the BS is gettin old real fast... |
|
| Author: | The Shafer [ Mon Dec 28, 2009 9:41 am ] |
| Post subject: | Re: PD Guys |
they probly just had more chit in the boat. as far as I know they are 1/8" |
|
| Author: | Crews [ Mon Dec 28, 2009 10:13 am ] |
| Post subject: | Re: PD Guys |
This stresses me out. |
|
| Author: | jn70549 [ Mon Dec 28, 2009 10:39 am ] |
| Post subject: | Re: PD Guys |
Didn't really want to say it but it was all the ducks we had in the bottom that made it a little bit heavy |
|
| Author: | quackconsumer [ Mon Dec 28, 2009 10:57 am ] |
| Post subject: | Re: PD Guys |
| Author: | take'emgator [ Mon Dec 28, 2009 10:58 am ] |
| Post subject: | Re: PD Guys |
| Author: | take'emgator [ Mon Dec 28, 2009 11:00 am ] |
| Post subject: | Re: PD Guys |
Boy you guys jacked this thread all up, talk about us...sheeesh It was a simple F'en question and you guys run away with it! Read the question twice before posting comments in the future! |
|
| Author: | The Shafer [ Mon Dec 28, 2009 11:05 am ] |
| Post subject: | Re: PD Guys |
me and another person answered your god dayum question....shut the phuck up now!!!! dude you asked for that chit argueing and getting in a pissing match with people. If someone wasnts to be a smart asss just ignore it and the thread wont phuckin get jacked up. |
|
| Author: | take'emgator [ Mon Dec 28, 2009 11:08 am ] |
| Post subject: | Re: PD Guys |
| Author: | jn70549 [ Mon Dec 28, 2009 12:15 pm ] |
| Post subject: | Re: PD Guys |
| Author: | EasTexDux88 [ Mon Dec 28, 2009 12:43 pm ] |
| Post subject: | Re: PD Guys |
| Author: | Crews [ Mon Dec 28, 2009 1:10 pm ] |
| Post subject: | Re: PD Guys |
| Author: | keestan31 [ Mon Dec 28, 2009 1:27 pm ] |
| Post subject: | Re: PD Guys |
Well so much for this thread, just was wondering if there was a big difference in how the boats were made...also Coastal if that really was you that we helped you can run that boat up on the rollers and it will make it alot easier to push over next time its not gonna damage the boat. |
|
| Author: | coastal [ Mon Dec 28, 2009 1:58 pm ] |
| Post subject: | Re: PD Guys |
It was not me...We would of been formally introduced at the time. |
|
| Author: | Team Camo [ Mon Dec 28, 2009 1:59 pm ] |
| Post subject: | Re: PD Guys |
What did that mean? Surely you meant "Hey I'm Cope, how's it goin?" Right? Amazing how fast that went south. Sorry, Keestan, I was just makin light of all the BS from before, dang sure didn't mean for it to get all screwy like that. Hey Damon, yeah I do remember openin mornin. I also remember that it was all of us who hung around until we made sure everybody made it in. Thanks again for the help that mornin. Like I said, I was just makin light of a stupid arguement and somebody ran with it. Oh well, another thread gone.
|
|
| Author: | coastal [ Mon Dec 28, 2009 2:17 pm ] |
| Post subject: | Re: PD Guys |
Right!! 
|
|
| Author: | T-mac [ Mon Dec 28, 2009 2:32 pm ] |
| Post subject: | Re: PD Guys |
Just think of how awesome this place will be when it gets to 3000 members WOOOOO-WEEEE!!! |
|
| Author: | Brinkleydog [ Mon Dec 28, 2009 2:38 pm ] |
| Post subject: | Re: PD Guys |
| Author: | quackconsumer [ Mon Dec 28, 2009 2:49 pm ] |
| Post subject: | Re: PD Guys |
X 2 - 6 + 1
|
|
| Author: | jn70549 [ Mon Dec 28, 2009 4:29 pm ] |
| Post subject: | Re: PD Guys |
| Author: | POKER1 [ Mon Dec 28, 2009 4:44 pm ] |
| Post subject: | Re: PD Guys |
| Author: | BROOKS [ Tue Dec 29, 2009 9:13 am ] |
| Post subject: | Re: PD Guys |
pie is round .... not squar ..... |
|
| Author: | JIMMY W [ Tue Dec 29, 2009 9:44 am ] |
| Post subject: | Re: PD Guys |
I am trying very hard,But sumabitch it is hard to read some of this shit 
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|