My 48" has 6 or 7 2x2's
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 18x44 GD foam removal https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=68058 |
Page 1 of 1 |
| Author: | NinjaButtpirate [ Mon Aug 29, 2016 3:13 pm ] |
| Post subject: | 18x44 GD foam removal |
.... Sent from my iPhone using Tapatalk |
|
| Author: | flint87 [ Mon Aug 29, 2016 6:17 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
Heard dat! Sent from my iPhone using Tapatalk |
|
| Author: | flint87 [ Mon Aug 29, 2016 6:17 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
Cut them shit ass pods out too. Sent from my iPhone using Tapatalk |
|
| Author: | flint87 [ Mon Aug 29, 2016 6:18 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
| Author: | kirk [ Mon Aug 29, 2016 6:42 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
GD boats only have 4 stringers? |
|
| Author: | SETx Longtail [ Mon Aug 29, 2016 7:11 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
On the narrower older design (pre 2005?) they had 4, since then, they've added one to make it 5. The 38" boats still have 4. |
|
| Author: | kirk [ Tue Aug 30, 2016 2:09 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
| Author: | flint87 [ Tue Aug 30, 2016 2:11 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
| Author: | flint87 [ Tue Aug 30, 2016 2:12 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
| Author: | cb5331 [ Tue Aug 30, 2016 2:17 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
My 48" has 6 or 7 2x2's
|
|
| Author: | flint87 [ Tue Aug 30, 2016 4:32 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
| Author: | kirk [ Tue Aug 30, 2016 6:03 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
| Author: | cb5331 [ Tue Aug 30, 2016 6:46 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
I think my pd had 5 1x2 in a 48" bottom. Don't remember for sure though, and that was an 04 boat, not sure if anything has changed. |
|
| Author: | flint87 [ Tue Aug 30, 2016 8:01 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
| Author: | Burch [ Wed Aug 31, 2016 9:20 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
Don't cut out the rear pods. I took the foam out of mine,fabbed lids and turned them into gun boxes on mine. It was nice to have the guns off the floor. |
|
| Author: | Will C [ Wed Aug 31, 2016 10:16 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
My 1744 Willet has 7 stringers,, just sayin 
|
|
| Author: | krazybronco2 [ Thu Sep 01, 2016 1:38 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
third pic is that chick about to put in a dip? |
|
| Author: | BERNIE255 [ Thu Sep 01, 2016 8:20 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
Tha fuk? Sent from my iPhone using Tapatalk |
|
| Author: | NinjaButtpirate [ Thu Sep 01, 2016 8:34 pm ] |
| Post subject: | 18x44 GD foam removal |
....... |
|
| Author: | NinjaButtpirate [ Thu Sep 01, 2016 8:36 pm ] |
| Post subject: | 18x44 GD foam removal |
....... |
|
| Author: | NinjaButtpirate [ Thu Sep 01, 2016 8:37 pm ] |
| Post subject: | 18x44 GD foam removal |
.......... |
|
| Author: | NinjaButtpirate [ Thu Sep 01, 2016 8:39 pm ] |
| Post subject: | 18x44 GD foam removal |
.......... |
|
| Author: | NinjaButtpirate [ Thu Sep 01, 2016 8:44 pm ] |
| Post subject: | 18x44 GD foam removal |
.......... |
|
| Author: | BERNIE255 [ Thu Sep 01, 2016 9:03 pm ] |
| Post subject: | Re: 18x44 GD foam removal |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|