Remove bolts, fill holes, slide motor over, test run, if all is well, drill new holes and bolt in place..
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Mud Buddy Sport V Tiller Torque https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=70001 |
Page 1 of 1 |
| Author: | svdb [ Tue Mar 07, 2017 7:21 am ] |
| Post subject: | Mud Buddy Sport V Tiller Torque |
I have a mud buddy sport v mag 5000 on a excel f4 1751 and the tiller torque pushing toward me is just about unbearable. I've tried bending the skeg like the manual says but it didn't really help. Is there anything else that may be causing the problem and what can I do to fix it. Please Help! Thanks |
|
| Author: | North LA Hunter [ Tue Mar 07, 2017 7:21 am ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
Try shifting some weight from one side to another. Sent from my iPhone using Tapatalk |
|
| Author: | svdb [ Tue Mar 07, 2017 7:50 am ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
The last few times I've ran it the boat has been pretty much empty. Just me, my wife and a small cooler. |
|
| Author: | ibfishinb [ Tue Mar 07, 2017 8:21 am ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
Move the cooler around. Also have your wife sit in a comfy folding Camp chair. Moving the chair around until you find where your rig performs best. Sent from my SM-G920V using Tapatalk |
|
| Author: | CypressCritter [ Tue Mar 07, 2017 8:37 am ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
Adjust your trim sometimes that helps. |
|
| Author: | DENNYEDWARDS [ Tue Mar 07, 2017 10:48 am ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
Might have to move motor on transom off center alittle to left side. |
|
| Author: | svdb [ Tue Mar 07, 2017 12:00 pm ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
I don't think I can move the motor its bolted on the transom. |
|
| Author: | cb5331 [ Tue Mar 07, 2017 12:18 pm ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
Remove bolts, fill holes, slide motor over, drill new holes, re-install bolts. |
|
| Author: | Old School [ Tue Mar 07, 2017 4:59 pm ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
Remove bolts, fill holes, slide motor over, test run, if all is well, drill new holes and bolt in place..
|
|
| Author: | Mad Crab [ Mon Mar 13, 2017 3:02 pm ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
How long has it been doing this? Did the boat ever run right for you? Did you recently hit something with it? Can you post a picture of your skeg? Can you post a picture of the motor on the back of the boat? I have a Sport V 5000 on a 1754. Mine runs without significant tiller torque unless I have it trimmed way too low. |
|
| Author: | svdb [ Tue Mar 14, 2017 6:43 am ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
I just bought the boat a few weeks ago but the guard about the prob is a little bent that may have something to do with it. I'll try to post some pictures this week. Thanks |
|
| Author: | Quack N Stack [ Thu Mar 16, 2017 8:21 pm ] |
| Post subject: | Re: Mud Buddy Sport V Tiller Torque |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|