I don't know if I could rock one. I'd start a forest fire
I bet it does good with those long primaries.
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Caddo Raffle Exhaust Givaway https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=70526 |
Page 1 of 1 |
| Author: | Will C [ Thu Jun 01, 2017 12:29 pm ] |
| Post subject: | Caddo Raffle Exhaust Givaway |
Just finished up my donation for this year. I call it the " Texas Two Tone " . Longtube stepped header on a 2/1 collector. No way for baffles to fall back in. No mounting to the case bolts that make an oil leak. Removable header cap. In quiet mode its a good sound thats wife and kids approved. Remove cap for extra flow ,summer or those loud times. Ive built a few of these. They perform very well. On my personal rig i ran with the cap of for a day. Its runs just as good with cap on so i never pulled it back off. Remember this is all to support Caddo so buy some tickets. Thanks, will. Texas Mudmotors |
|
| Author: | Will C [ Thu Jun 01, 2017 12:30 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
Similar one on my old setup |
|
| Author: | pokey79 [ Thu Jun 01, 2017 2:35 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
Nice Will it kinda reminds me of my project exhaust im working on. |
|
| Author: | cb5331 [ Thu Jun 01, 2017 2:40 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
Saaaaaaaawweeeeeeeeeeeeeeeetttttttt!!!!!!!!! |
|
| Author: | cb5331 [ Thu Jun 01, 2017 2:41 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
Post it on the sponsors page in the caddo forum! |
|
| Author: | 3rd Coast Killer [ Thu Jun 01, 2017 2:55 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
Badass. |
|
| Author: | SETx Longtail [ Thu Jun 01, 2017 7:15 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
I don't know if I could rock one. I'd start a forest fire I bet it does good with those long primaries.
|
|
| Author: | cb5331 [ Thu Jun 01, 2017 8:21 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
You saw his old one there last year. It was all black though so a little less noticeable. Sent from my SM-T710 using Tapatalk |
|
| Author: | SETx Longtail [ Thu Jun 01, 2017 8:29 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
Yeah. I did see it but it was a little more incognegro. But seriously how do these hold up getting whacked with limbs and such? They look really freakin tall. |
|
| Author: | Will C [ Thu Jun 01, 2017 9:28 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
Lol, yea its tall. I staired at it for hours trying to come up with somethin. This is the best i could come up with  ive got a Delta intake coming to see how it looks with a tall carb setup. Its still in the " beat the shit out of it and see what breaks" stage. On a plus side it also has an o2 bung welded in and ready for tuning. On a stock 35 i tested this pipe on the afr was in the 13.4 range with a light load, wich isnt bad but a bit lean. I figure it will encourage the winner to dial in his motor.
|
|
| Author: | Will C [ Thu Jun 01, 2017 9:32 pm ] |
| Post subject: | Re: Caddo Raffle Exhaust Givaway |
The first pic does look crazy tall but more like the big bullfrog pic, its not quite that tall 
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|