| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 1248 Airboat Hull https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=73891 |
Page 1 of 1 |
| Author: | Cubman [ Sat Jun 08, 2019 8:03 pm ] |
| Post subject: | 1248 Airboat Hull |
I have a 12ft airboat hull that is 48" wide on the bottom plus turning chines. I started to put together an airboat but never finished it. I'm thinking about rebuilding the transom and running a mud motor on it. What motor do you think would suit this hull? I was considering a 12hp copperhead. |
|
| Author: | Wchauvin [ Sat Jun 08, 2019 9:11 pm ] |
| Post subject: | Re: 1248 Airboat Hull |
I would think the little copperhead would do well on there. Might even be able to go with the 18 since you are 48 wide, but I don’t see why the 12 wouldn’t work well as long as you built the transom to the right height for those little copperheads |
|
| Author: | Russ [ Sat Jun 08, 2019 9:25 pm ] |
| Post subject: | Re: 1248 Airboat Hull |
Dont overdo it. It doesnt need alot. If you have any hp restricted areas around you, the 10hp makes a nice size, so the 12 would be fine if not. Unless it's a heavy 12ft boat, 12 hp is plenty. The whole point of a rig like that is small and lightweight. Keep it that way. #CFFITR #GhostBoat #Whoneedsphysicsihaveamudmotor |
|
| Author: | JIMMY W [ Mon Jun 10, 2019 8:01 am ] |
| Post subject: | Re: 1248 Airboat Hull |
That boat needs a GatorTail 40 hp with a center console |
|
| Author: | dead animal [ Mon Jun 10, 2019 9:28 am ] |
| Post subject: | Re: 1248 Airboat Hull |
that boat needs a 200 lycoming or a gpu on it!!!! |
|
| Author: | JIMMY W [ Mon Jun 10, 2019 11:21 pm ] |
| Post subject: | Re: 1248 Airboat Hull |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|