| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| whats a trailering bracket https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=7418 |
Page 1 of 1 |
| Author: | bohanan [ Thu Jan 28, 2010 2:51 pm ] |
| Post subject: | whats a trailering bracket |
maybe im an idiot, but i dont know what you mean by a trailering bracket. ive got a 36hp prodrive and i have bent the control arms twice in a year,i believe, because of trailering with just a tie down strap, but i dont know for sure. if anyone can throw up a pic id like to see what one looks like. if its something that takes the bounce off the motor, i might look into one |
|
| Author: | cb5331 [ Thu Jan 28, 2010 3:49 pm ] |
| Post subject: | Re: whats a trailering bracket |
Dont think they make a bracket for the pd. KP at prodrive says not to tie it down. Just tilt it all the way up and let it ride. |
|
| Author: | cmelvin [ Thu Jan 28, 2010 4:50 pm ] |
| Post subject: | Re: whats a trailering bracket |
its a gatortail thing |
|
| Author: | hunterg [ Thu Jan 28, 2010 10:20 pm ] |
| Post subject: | Re: whats a trailering bracket |
only problem with just trimmin it up and lettin it ride is some of us dont have PD boats and that sum bitch bouncin with put a hurtin on a transom. |
|
| Author: | cb5331 [ Thu Jan 28, 2010 10:54 pm ] |
| Post subject: | Re: whats a trailering bracket |
I put a strap on mines. I kinda feel the same way you do bout the transom. Just don't put to much pressure on it. Think some people are puttin straps on too tight, thats why kp says just trim it up. I've tried to figure out a way to get a transom saver to work, but haven't played with it enough yet. Just for peace of mind. |
|
| Author: | take'emgator [ Thu Jan 28, 2010 11:34 pm ] |
| Post subject: | Re: whats a trailering bracket |
| Author: | dead animal [ Fri Jan 29, 2010 6:45 am ] |
| Post subject: | Re: whats a trailering bracket |
i just drive. if it needed a 'trailering bracket' i wouldn't of bought it. people who are tearing stuff up are doing it to themselves with a pd. how in the hell do u bend the control arms unless u are doing sumthing really crazy like strapping the engine down to the trailer instead of the boat or sumthing of that nature. or u just can't drive between the ditches. |
|
| Author: | Brinkleydog [ Fri Jan 29, 2010 9:03 am ] |
| Post subject: | Re: whats a trailering bracket |
Just strap your boat to the trailer and drive off.....unless u have a lowride trailer than u need to trim up a little. I have drug my rig all over tx and have not had a proble. even with the sucky roads between Me and West TX |
|
| Author: | JIMMY W [ Fri Jan 29, 2010 10:22 am ] |
| Post subject: | Re: whats a trailering bracket |
The ProDrives for sure put a beating on the transoms and the Trim! When I had the ProDrive,It tore the trim up |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|