| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Galvashield Trailers https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=2&t=9746 |
Page 1 of 1 |
| Author: | dozrya [ Tue May 18, 2010 5:39 pm ] |
| Post subject: | Galvashield Trailers |
Was curious to see if any of you guys have a galvashield trailer. If so, any info would be appreciated. I googled them and basically Nitro and Tracker use them for their trailers. Looking to put a 18x48 flat on it. Sorry for the giant picture. |
|
| Author: | duckhunter888 [ Tue May 18, 2010 5:56 pm ] |
| Post subject: | Re: Galvashield Trailers |
My suggestion would be to set those bunks lower on your setup. The boat will launch alot easier and you won't need as much water to get it off the trailer. |
|
| Author: | dead duk [ Wed May 19, 2010 5:20 pm ] |
| Post subject: | Re: Galvashield Trailers |
Are you wondering about the durability of the trailer? If so, here is what I can tell you. I worked in the metal buildings industry and we sold a "zincalum" panel to be used in areas where corrosion is an issue. It looks like the trailer has the same coating plus a couple of extra coats of "stuff." You will get a alot of wear out of that trailer. |
|
| Author: | dozrya [ Wed May 19, 2010 5:24 pm ] |
| Post subject: | Re: Galvashield Trailers |
That is exactly what I was wondering. The durability is of wonder. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|