Get your old boat back and run the modded motor on it then you will have somthing
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Engine guys whats the Next best bang for the buck? https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=209 |
Page 1 of 2 |
| Author: | willett [ Fri Jan 23, 2009 1:50 pm ] |
| Post subject: | Engine guys whats the Next best bang for the buck? |
Got EVT Stage 1 on 36 PD Gotta get case gasket replaced and might as well add a little more to the engine while the bottom end is open What would be the best thing to add in without completely getting a stage 2 motor? |
|
| Author: | 50fps [ Fri Jan 23, 2009 3:29 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
I would check with EVT and see what they recommend seeing as you are currently running their components. |
|
| Author: | Hizzoner [ Fri Jan 23, 2009 5:01 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
sharkteeth or flames |
|
| Author: | deltaduckmaster [ Fri Jan 23, 2009 7:11 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
Get your old boat back and run the modded motor on it then you will have somthing
|
|
| Author: | RC [ Fri Jan 23, 2009 7:59 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
No brainer, camshaft! If ya gotta replace the case gasket it'd only take a few more minutes (literally) to change the cam. |
|
| Author: | BROOKS [ Fri Jan 23, 2009 8:41 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
I agree with R'erCee !!!!! 
|
|
| Author: | jus10inla [ Fri Jan 23, 2009 9:01 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
Cam. |
|
| Author: | willett [ Fri Jan 23, 2009 9:07 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
Could just talk to them but since a lot of folks have done stuff figured I'd ask here When Putting the performance cam in do you HAVE to have any extra parts or can just put cam in and be ok with the rest of the stock rods and stuff? |
|
| Author: | jus10inla [ Fri Jan 23, 2009 9:27 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
willy, ive got Cam, exhaust, and heads, nothing extra. no carb (yet) so im sure you'd b fine w/ everythign else stock. |
|
| Author: | mudd [ Sat Jan 24, 2009 1:52 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
3 Blade Prop
|
|
| Author: | QUACK KILLA [ Sun Jan 25, 2009 11:34 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
polymer bottom hahaha |
|
| Author: | Damon Silva [ Mon Jan 26, 2009 11:13 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
You may be joking about a polymer bottom. I will tell you after this weekend a POLYMER bottom is damn nice to have!!!!! |
|
| Author: | Mitschke [ Mon Jan 26, 2009 2:52 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | Gatorpoint [ Mon Jan 26, 2009 3:01 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | T-mac [ Mon Jan 26, 2009 8:07 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
may as well put a new fetzer valve in there while you're at it....amazing difference |
|
| Author: | bayouboy [ Mon Jan 26, 2009 8:57 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
with some, uh, 3-in-1 oil and some gauze pads. |
|
| Author: | River [ Tue Jan 27, 2009 7:51 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
NOX |
|
| Author: | Tulsa_Woody [ Tue Jan 27, 2009 8:45 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
"Awww, come on guys, it's so simple. Maybe you need a refresher course....It's all ball bearings nowdays." Woody |
|
| Author: | weathers1200 [ Tue Feb 03, 2009 6:45 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | River [ Tue Feb 03, 2009 8:39 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | brentfonty [ Tue Feb 03, 2009 9:09 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
Might wont to wait till sumer. someone is testing a new mufler with ball bearins in it to spin the exaust out more faster. the ball bearins are very high heet an special coatin to stop heat an stil be able to threw out exaust faster. |
|
| Author: | weathers1200 [ Tue Feb 03, 2009 9:39 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | Mitschke [ Tue Feb 03, 2009 10:35 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | bayouboy [ Tue Feb 03, 2009 11:44 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | Tulsa_Woody [ Wed Feb 04, 2009 8:40 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
I know this is a little off topice...but can anyone help me find some prop wash? Woody |
|
| Author: | white1 [ Wed Feb 04, 2009 8:59 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | Tulsa_Woody [ Wed Feb 04, 2009 9:09 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | LaBirdman [ Wed Feb 04, 2009 9:25 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | Mitschke [ Wed Feb 04, 2009 6:20 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
I have always heard timkens spin faster than those POS Japanese bearings... What bearings are yall getting more performance out of???? 
|
|
| Author: | cash [ Wed Feb 04, 2009 9:36 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | River [ Thu Feb 05, 2009 6:29 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | brentfonty [ Thu Feb 05, 2009 10:07 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | weathers1200 [ Thu Feb 05, 2009 2:03 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Author: | River [ Thu Feb 05, 2009 3:10 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
Damn weathers You a witty SOB. BBBBBBBBWWWWWHHHHHHAAAAAAAAAAAAA Dude, seriously, I have been in search of a worth adversary every since Nubbler left the scene. I suppose if that is all you have, I have yet to find one. 
|
|
| Author: | weathers1200 [ Thu Feb 05, 2009 7:18 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
Hey man, I don't look around for arguments or adversaries, especially on the internet. I have a couple of ex-wives that used to like to argue. When someone asks a serious question about something like engines, I try to help them out. Don't really need a bunch of bullshit about it. I have been building experimental mud motor powerplants for several years and don't mind sharing info with those that are interested. If I want to hear a whole lot of shit talking I can just go down to the local "hood" and hang out with the crack heads and ho's. If you got something worth saying I'm all ears, otherwise waste all the time you want on the playground, dude. |
|
| Author: | River [ Thu Feb 05, 2009 9:19 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
Damn,,,,,,,,,you done called me a ho Now that's more like it. |
|
| Author: | coastal [ Thu Feb 05, 2009 9:52 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
Called you a crackhead too.. SandMan,,,You pimpin His old azz.  I know you aint a crackhead...You like Heartguard 
|
|
| Author: | POKER1 [ Thu Feb 05, 2009 10:23 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
You got to forgive River. He ain't been the same since he almost lost a hand in a MM accident. Kinda hard to balance on that stump and hold up the tail without two.
|
|
| Author: | weathers1200 [ Thu Feb 05, 2009 11:22 pm ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
This isn't my first chat with river, I've had a few on here and most were met with the same brand of bullshit. It's all good, I like to have fun with the best of them I just don't like cheap shots, life's too short. |
|
| Author: | River [ Fri Feb 06, 2009 10:34 am ] |
| Post subject: | Re: Engine guys whats the Next best bang for the buck? |
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|