Take the coils off
jk
Probably shoot penetrating oil where it counts and let it set overnight.
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Removing Flywheel https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=3112 |
Page 1 of 1 |
| Author: | Full Throttle [ Sat Jul 11, 2009 9:23 am ] |
| Post subject: | Removing Flywheel |
Never had any problems in the past using a gear puller and an impact wrench set at 120 psi. This time it won't budge!!!! Any suggestions? |
|
| Author: | RC [ Sat Jul 11, 2009 3:48 pm ] |
| Post subject: | Re: Removing Flywheel |
Take the coils off jk Probably shoot penetrating oil where it counts and let it set overnight. |
|
| Author: | kibb [ Sat Jul 11, 2009 6:13 pm ] |
| Post subject: | Re: Removing Flywheel |
Try 150 psi. |
|
| Author: | Full Throttle [ Sat Jul 11, 2009 10:22 pm ] |
| Post subject: | Re: Removing Flywheel |
It wasn't easy, but I got it off. 
|
|
| Author: | darrel from meraux [ Sat Jul 11, 2009 11:25 pm ] |
| Post subject: | Re: Removing Flywheel |
why u taking it off..? |
|
| Author: | Full Throttle [ Sun Jul 12, 2009 8:52 am ] |
| Post subject: | Re: Removing Flywheel |
| Author: | 50fps [ Sun Jul 12, 2009 10:29 am ] |
| Post subject: | Re: Removing Flywheel |
| Author: | mudd [ Sun Jul 12, 2009 12:55 pm ] |
| Post subject: | Re: Removing Flywheel |
The Key was sheared too if I remember ,,, |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|