MudmotorTalk.com - View topic - Anybody seen this oil leak spot?

Page 1 of 1

[ 10 posts ]

Anybody seen this oil leak spot?

Author	Message
willett MMT Sponsor Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX	Anybody seen this oil leak spot? Noticed this couple weeks ago when changing my clutch Anyone else ever seen oil sheen/leak in this spot on 36 Vert? _________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
Wed Jan 14, 2009 5:14 pm

River MMT 1000 Club Joined: Wed Jan 14, 2009 8:34 am Posts: 1092 Location: Unaffiliated, SETX group has caused me to renounce my Texas Citizenship	Re: Anybody seen this oil leak spot? Case gasket _________________ "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the outcome of the vote."-Benjamin Franklin
Wed Jan 14, 2009 5:31 pm

BROOKS MMT 1000 Club Joined: Tue Jan 13, 2009 9:46 pm Posts: 4596 Location: East TEXAN Proud	Re: Anybody seen this oil leak spot? Good eye Rivers !!!! I thank the bolt on the left needs just a little tightn' up and you be good to go. _________________ Git a Gator-Tail or ride in mines wake ...... MtrFact !!!!! '05 Model .... Still Number One on the Water !!!!
Wed Jan 14, 2009 6:49 pm

Brinkleydog MMT 1000 Club Joined: Tue Jan 13, 2009 5:15 pm Posts: 1361 Location: Longview, TX	Re: Anybody seen this oil leak spot? every time i go out i see that.........good luck. I'm going to tie mine to each other then i get time to drill pilot holes for the wire. How many minutes can u run before you have to tighten you bolds? it get about 12-40 min...................I HATE CASE GASKETS.............. _________________ 20 x 54 with 9/16 bottom powered by Twin BLACK CHICKS with FPR The Breast Cancer site is having trouble getting enough people to click on it daily to meet their quota of donating at least one free mammogram a day to an underprivileged woman. Go here and click on the "donate a mammogram". This doesn't cost you a thing. Their corporate sponsors/advertisers use the number of daily visits to donate mammogram in exchange for advertising. http://www.thebreastcancersite.com
Thu Jan 15, 2009 10:25 am

Silkpower MMT Member Joined: Wed Jan 14, 2009 4:18 pm Posts: 18	Re: Anybody seen this oil leak spot? When you tear it down to replace the gasket you need to stud the base bolts & use lock nuts thay hold better the studs you will need are 8mm x 1.25 x 70mm seems to work well in the testing we have done
Thu Jan 15, 2009 11:41 am

bayouboy MMT Elite Member Joined: Tue Jan 13, 2009 6:08 pm Posts: 5376 Location: Venice, La	Re: Anybody seen this oil leak spot? That sounds like it might be a winner Silk!
Sat Jan 17, 2009 10:04 pm

Brinkleydog MMT 1000 Club Joined: Tue Jan 13, 2009 5:15 pm Posts: 1361 Location: Longview, TX	Re: Anybody seen this oil leak spot? If you want to just take the bolts out one at a time and put new lock-tight on them. did this on all the bolt i could get to (without taking anythign off) and it held for 5 hours this weekend. Im going to take the pipe off today and get that one. DO NOT DO THIS MORE THAN A FEW TIME YOU WILL STRIP OUT THE THREADS...then you will have to stud it like Silk said. Silk what you charge to stud a 36 pd out? Later _________________ 20 x 54 with 9/16 bottom powered by Twin BLACK CHICKS with FPR The Breast Cancer site is having trouble getting enough people to click on it daily to meet their quota of donating at least one free mammogram a day to an underprivileged woman. Go here and click on the "donate a mammogram". This doesn't cost you a thing. Their corporate sponsors/advertisers use the number of daily visits to donate mammogram in exchange for advertising. http://www.thebreastcancersite.com
Mon Jan 19, 2009 9:59 am

willett MMT Sponsor Joined: Wed Jan 14, 2009 10:22 am Posts: 1764 Location: Tyler, TX	Re: Anybody seen this oil leak spot? not too worried bout it right now got barely a week left in season then will be goin back to them to get some more put into the motor and have gasket changed _________________ Pete Willett WC Custom Boats - Tyler, TX http://www.wccustomboats.com WC Custom 2048 3/16 Bottom Center Console with 35 PD EFI GTR WC Custom 1840 Hybrid 3/16 Bottom with 37 EFI BOSS
Mon Jan 19, 2009 10:23 am

Pappy Gander MMT Member Joined: Mon Jan 19, 2009 6:10 pm Posts: 9 Location: Somewhere	Re: Anybody seen this oil leak spot? I've run a case gasket leak all season and just watched the level. Run about 20 hrs and it hasn't gone down much. I'll fix it when I get around to it in the off season.
Mon Jan 19, 2009 6:13 pm

Mudgun MMT Addict Joined: Wed Jan 14, 2009 12:24 pm Posts: 746 Location: Here Be Rocks VA	Re: Anybody seen this oil leak spot? Just run thicker oil. _________________ 1660 Rhino High-Side with center console 90/65 Mercury 2 stroke Outboard jet pump Run shallow, run loud.
Fri Jan 23, 2009 7:24 am

Display posts from previous: Sort by

Page 1 of 1

[ 10 posts ]

Anybody seen this oil leak spot?

Who is online