THIS IS HOW I ROLL,IF YOU DON'T LIKE CALL TEXT SOMEBODY WHO GIVES A FLYING PHUCK. BTW I LOVE PISSING YOU GUYS OFF
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| cut my baffles out https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=4901 |
Page 1 of 1 |
| Author: | honkerh8r [ Mon Sep 28, 2009 3:41 am ] |
| Post subject: | cut my baffles out |
I knocked the baffles out of my stock exhaust. Can I expect much difference in performance? Is it just hopeful thinking, or might I pick up a little bit of power? |
|
| Author: | craig [ Mon Sep 28, 2009 6:20 am ] |
| Post subject: | Re: cut my baffles out |
You will gain a little, but it will be minimal. Be sure to get ALL slag out of the exhuast before you weld it back up. |
|
| Author: | bjg [ Mon Sep 28, 2009 6:50 pm ] |
| Post subject: | Re: cut my baffles out |
At the most you may feel a lil low end response. |
|
| Author: | deltaduckmaster [ Mon Sep 28, 2009 6:52 pm ] |
| Post subject: | Re: cut my baffles out |
| Author: | b_coonass [ Mon Sep 28, 2009 6:52 pm ] |
| Post subject: | Re: cut my baffles out |
i just did the same thing on my 20hp go-devil an i drilled some wholes on each side |
|
| Author: | deltaduckmaster [ Mon Sep 28, 2009 6:55 pm ] |
| Post subject: | Re: cut my baffles out |
| Author: | Tenpoint [ Mon Sep 28, 2009 7:00 pm ] |
| Post subject: | Re: cut my baffles out |
| Author: | honkerh8r [ Thu Oct 01, 2009 7:21 pm ] |
| Post subject: | Re: cut my baffles out |
Did the holes in the sides make any difference in comparison to just cutting the baffles out and otherwise leaving it the way it was? |
|
| Author: | bundy [ Thu Oct 01, 2009 7:52 pm ] |
| Post subject: | Re: cut my baffles out |
its louder lol thats bout it |
|
| Author: | Mud Slinger [ Sat Oct 03, 2009 12:18 am ] |
| Post subject: | Re: cut my baffles out |
louder muffs let the skeeters and gators know your coming down the canal |
|
| Author: | BODUKE_7 [ Sat Oct 03, 2009 7:51 am ] |
| Post subject: | Re: cut my baffles out |
| Author: | Matt [ Sat Oct 03, 2009 8:17 am ] |
| Post subject: | Re: cut my baffles out |
| Author: | BODUKE_7 [ Sat Oct 03, 2009 8:29 am ] |
| Post subject: | Re: cut my baffles out |
THIS IS HOW I ROLL,IF YOU DON'T LIKE CALL TEXT SOMEBODY WHO GIVES A FLYING PHUCK. BTW I LOVE PISSING YOU GUYS OFF
|
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|