MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
Rev Limiter https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=613 |
Page 1 of 1 |
Author: | PaulDarensbourg [ Thu Feb 12, 2009 5:08 pm ] |
Post subject: | Rev Limiter |
Anybody know if this is the same rev limiter that evt and bps sells? http://store.600racing.com/site/product ... 39EAC6D08E |
Author: | Pooh Bear [ Thu Feb 12, 2009 7:52 pm ] |
Post subject: | Re: Rev Limiter |
Paul, check with Rail he should know. |
Author: | RC [ Thu Feb 12, 2009 8:40 pm ] |
Post subject: | Re: Rev Limiter |
Same, but not set up with the right rpm "chip". |
Author: | PaulDarensbourg [ Thu Feb 12, 2009 8:47 pm ] |
Post subject: | Re: Rev Limiter |
I got the chip, just need the box cause mine went bad. Thanks |
Author: | white1 [ Thu Feb 12, 2009 8:51 pm ] |
Post subject: | Re: Rev Limiter |
Get a spare ![]() ![]() |
Author: | PaulDarensbourg [ Thu Feb 12, 2009 9:02 pm ] |
Post subject: | Re: Rev Limiter |
I know how to bypass that fucer now! |
Author: | Rail [ Thu Feb 12, 2009 11:26 pm ] |
Post subject: | Re: Rev Limiter |
Same one.. Defaults at 5600.. |
Author: | RC [ Fri Feb 13, 2009 4:45 am ] |
Post subject: | Re: Rev Limiter |
I even talked with one of the design engineers at Auto Meter, he claimed they didn't make, design or know of such a device. |
Author: | PaulDarensbourg [ Fri Feb 13, 2009 8:11 am ] |
Post subject: | Re: Rev Limiter |
I can't find anything on there website about the either. FUnny thing though, if you do a search on a website for norther mud motor you will find the president talking about how his dad just invented them a rev limiter. I think they mislabled it when they put auto meter on it. ![]() |
Author: | RC [ Fri Feb 13, 2009 12:47 pm ] |
Post subject: | Re: Rev Limiter |
The guy's dad din't invent it, he just found the right resistor to give you "x" amount of rpm limit, cuz 600 racing only had a rev limit chip/resistor that wasn't any good for these engines. |
Author: | deadbird8 [ Sat Feb 14, 2009 10:48 am ] |
Post subject: | Re: Rev Limiter |
Author: | RC [ Sat Feb 14, 2009 7:37 pm ] |
Post subject: | Re: Rev Limiter |
Then it must be true. |
Author: | Rail [ Sat Feb 14, 2009 8:19 pm ] |
Post subject: | Re: Rev Limiter |
Cuz that little F@cker would never lie now would he.. ![]() ![]() |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |