| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Honda gx670 https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=6153 |
Page 1 of 1 |
| Author: | AcolemrcU [ Sun Nov 22, 2009 8:40 pm ] |
| Post subject: | Honda gx670 |
Anyone have a manual for the 24hp gx670? I need an engine diagram that shows the carb. Is there an overflow on the side of the motor? I was running the other day and my LT basically slowly shut down. There are no holes in the engine but gas flows from the side of the carb when I prime the motor. Any info. would be great, duck season just started in FL and I am stuck! |
|
| Author: | postalpaul [ Tue Nov 24, 2009 5:24 pm ] |
| Post subject: | Re: Honda gx670 |
Okay just went through this, you are gettin fuel to the carb correct? On the bottom side of the carb is a 12+ activated solenoid, carefully tear into that and look closely at the plunger solenoid assembly. Mine was sticking closed- keep in mind when you turn the key on and touch the solenoid assembly to the motor frame the solenoid should pick effortlessly. I suspect ethanol was causing mine to stick. Pm me your e-mail address and I will send you the PDF I have found on Honda GX670 motor. Paul |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|