| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| 2011 23 hp GoDevil SURFACE DRIVE https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=74787 |
Page 1 of 1 |
| Author: | theHunter420 [ Wed Dec 11, 2019 9:42 pm ] |
| Post subject: | 2011 23 hp GoDevil SURFACE DRIVE |
Just bought my first mud boat. Downloaded the manual greased all exterior points. motor started right up idled it for about two minutes. Revved it up held it for about ten seconds let of idled back down got back on it then motor locked up. I haven’t called GoDevil yet plan on doing that tomorrow. Anyone know of rebuild kits out there? Did a quick google and a lot of different ones pop up. Sent from my iPhone using Tapatalk |
|
| Author: | matttwad [ Fri Dec 13, 2019 10:56 pm ] |
| Post subject: | 2011 23 hp GoDevil SURFACE DRIVE |
Man by the looks of that spark plug you had a hell of a wreck inside of that cylinder. My guess is you’ll need a short block rebuild. You can call a briggs dealer for one or type in your model number to a small engine website to find one yourself. Let us know what godevil says or what you find if you tear into it yourself. Sent from my iPhone using Tapatalk |
|
| Author: | theHunter420 [ Sun Dec 15, 2019 9:04 am ] |
| Post subject: | Re: 2011 23 hp GoDevil SURFACE DRIVE |
Well here is the after math dropped a valve and well you know what happens after that. Talked to coco haven’t looked at the cylinder yet to scared to take off the head lol. But if nothing is chewed up which I doubt the have heads they can sell me. I’m gonna get the head off today and will let you guys know the aftermath. Sent from my iPhone using Tapatalk |
|
| Author: | theHunter420 [ Sun Dec 15, 2019 7:13 pm ] |
| Post subject: | Re: 2011 23 hp GoDevil SURFACE DRIVE |
Here’s the piston cylinder didn’t get scared up at all. Sent from my iPhone using Tapatalk |
|
| Author: | cb5331 [ Sun Dec 15, 2019 9:06 pm ] |
| Post subject: | Re: 2011 23 hp GoDevil SURFACE DRIVE |
Never seen a valve come through the head like that. Pretty neat. Sent from my SM-T710 using Tapatalk |
|
| Author: | Russ [ Sun Dec 15, 2019 9:19 pm ] |
| Post subject: | Re: 2011 23 hp GoDevil SURFACE DRIVE |
That's a bit different valve geometry you got on there. Probably not as efficient as what Briggs had in mind. #CFFITR #GhostBoat #Whoneedsphysicsihaveamudmotor |
|
| Author: | BlueShamu [ Mon Dec 16, 2019 8:30 am ] |
| Post subject: | Re: 2011 23 hp GoDevil SURFACE DRIVE |
It’s got a triple angle. Sent from my iPhone using Tapatalk |
|
| Author: | Will C [ Mon Dec 16, 2019 10:42 am ] |
| Post subject: | Re: 2011 23 hp GoDevil SURFACE DRIVE |
Ouch. |
|
| Author: | bluesky2012 [ Mon Dec 16, 2019 11:44 am ] |
| Post subject: | Re: 2011 23 hp GoDevil SURFACE DRIVE |
Did you try JB Weld? Sent from my iPhone using Tapatalk Pro |
|
| Author: | theHunter420 [ Wed Dec 25, 2019 11:21 pm ] |
| Post subject: | Re: 2011 23 hp GoDevil SURFACE DRIVE |
Also threw the governor weights off. Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|