| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Help removing clutch https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=3&t=74848 |
Page 1 of 1 |
| Author: | JBsuperG [ Mon Jan 06, 2020 7:33 pm ] |
| Post subject: | Help removing clutch |
Looking for suggestions getting the clutch the rest of the way off. The outside piece came off with a little finesse. The inner part of the clutch slid part way off then got stuck. I don't want to damage it. Any suggestions are appreciated. 20200106_202056.jpg 20200106_202110.jpg |
|
| Author: | Russ [ Mon Jan 06, 2020 7:56 pm ] |
| Post subject: | Re: Help removing clutch |
Since it slid some, go back on with it, then try again until it comes off. Theres a spot of rust or whatever it's hanging up on, and you can probably work it smooth enough to slide that off. May be the key, but probably just something on the shaft. Sent from my SM-G970U using Tapatalk |
|
| Author: | BlueShamu [ Mon Jan 06, 2020 8:09 pm ] |
| Post subject: | Re: Help removing clutch |
Like Russ said...push it back on. Then, take a piece of Scotch-Brite and polish what you can see on the crank. Then, oil it up with a light oil...WD-40 or such. Then, try again. Sent from the ISS using Tapatalk. |
|
| Author: | JBsuperG [ Mon Jan 06, 2020 8:40 pm ] |
| Post subject: | Re: Help removing clutch |
Thanks guys. That worked. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|