| Author |
Message |
|
NTXbighorn93
MMT Pro Member
Joined: Fri Jan 30, 2015 10:16 am
Posts: 101
Location: North Texas
|
 mod v angle and length performance I'm planning on having another boat made after season and I'm starting to spec this one out, definitely going with a hybrid semi v on this one, thought I could get away with a true flat bottom since it's 18' I was very wrong haha to much open deep water around here so time to get a semi v to help my back a little. I'm planning on getting another 1854 again and I started to wonder what angle the semi v should be as well as how long it should be. Could I put more angle or length into the v to get better cut through waves or will I be sacrifing surface drive performance?
_________________
1854 Uncle J sport deck with a 36 prodrive
When in doubt throttle it out!
|
| Wed Dec 23, 2015 2:54 pm |
|
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
|
Re: Semi v angle and length performance In my opinion the happy medium is 3°. 6° goes over hard mud with ease, and waves don't pound at 6° either. But the 3° could probably do soup mud better.
It's simple. get a mud motor. shoot ducks in the face.
|
| Wed Dec 23, 2015 4:56 pm |
|
|
|
NTXbighorn93
MMT Pro Member
Joined: Fri Jan 30, 2015 10:16 am
Posts: 101
Location: North Texas
|
Re: Semi v angle and length performance Then I would definitely go with a 6° since we have 95% hard bottom
_________________
1854 Uncle J sport deck with a 36 prodrive
When in doubt throttle it out!
|
| Wed Dec 23, 2015 5:24 pm |
|
|
|
Hernaja1
MMT 1000 Club
Joined: Tue Feb 19, 2013 11:29 am
Posts: 2465
Location: Sulphur , La
|
Re: Semi v angle and length performance Semi V with a mud motor is pointless !!!!!
_________________
Dual 37 EFI GTR's pushing a 20/72 , CC, point bow , Old school drake Camo Willet custom.
|
| Wed Dec 23, 2015 5:46 pm |
|
|
|
NTXbighorn93
MMT Pro Member
Joined: Fri Jan 30, 2015 10:16 am
Posts: 101
Location: North Texas
|
Re: Semi v angle and length performance
_________________
1854 Uncle J sport deck with a 36 prodrive
When in doubt throttle it out!
|
| Wed Dec 23, 2015 7:43 pm |
|
|
|
Hernaja1
MMT 1000 Club
Joined: Tue Feb 19, 2013 11:29 am
Posts: 2465
Location: Sulphur , La
|
Re: Semi v angle and length performance Ok got ya a mod v.
_________________
Dual 37 EFI GTR's pushing a 20/72 , CC, point bow , Old school drake Camo Willet custom.
|
| Wed Dec 23, 2015 8:00 pm |
|
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
|
Re: Semi v angle and length performance Ya like this I'm assuming his is gonna be custom bilt. We have mostly clay bottoms and sand here. This hull does fine. I've had it in soup once. It wouldn't get on plane in the soup but I could do 9mph through it.
It's simple. get a mud motor. shoot ducks in the face.
|
| Wed Dec 23, 2015 8:46 pm |
|
|
|
Hernaja1
MMT 1000 Club
Joined: Tue Feb 19, 2013 11:29 am
Posts: 2465
Location: Sulphur , La
|
Re: Semi v angle and length performance That's gunna suck in big open water with a chop . Maybe not goin 15 but with a lil speed your getting wet.
_________________
Dual 37 EFI GTR's pushing a 20/72 , CC, point bow , Old school drake Camo Willet custom.
|
| Wed Dec 23, 2015 8:59 pm |
|
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
|
Re: Semi v angle and length performance
|
| Wed Dec 23, 2015 9:01 pm |
|
|
|
Hernaja1
MMT 1000 Club
Joined: Tue Feb 19, 2013 11:29 am
Posts: 2465
Location: Sulphur , La
|
Re: Semi v angle and length performance
_________________
Dual 37 EFI GTR's pushing a 20/72 , CC, point bow , Old school drake Camo Willet custom.
|
| Wed Dec 23, 2015 9:06 pm |
|
|
|
jakehawk9
MMT 1000 Club
Joined: Wed Jul 01, 2015 6:06 pm
Posts: 1447
Location: South central, ks
|
Re: Semi v angle and length performance
|
| Wed Dec 23, 2015 9:09 pm |
|
|
|
Hernaja1
MMT 1000 Club
Joined: Tue Feb 19, 2013 11:29 am
Posts: 2465
Location: Sulphur , La
|
Re: Semi v angle and length performance Yea there small. I had a few friends from college near Omaha that lived in Manhattan and south of Wichita.
_________________
Dual 37 EFI GTR's pushing a 20/72 , CC, point bow , Old school drake Camo Willet custom.
|
| Wed Dec 23, 2015 9:19 pm |
|
|
|
NTXbighorn93
MMT Pro Member
Joined: Fri Jan 30, 2015 10:16 am
Posts: 101
Location: North Texas
|
Re: mod v angle and length performance Yes I'm going custom built. Hernaja did your rig just get finished recently?
_________________
1854 Uncle J sport deck with a 36 prodrive
When in doubt throttle it out!
|
| Thu Dec 24, 2015 5:26 pm |
|
|
|
Hernaja1
MMT 1000 Club
Joined: Tue Feb 19, 2013 11:29 am
Posts: 2465
Location: Sulphur , La
|
Re: mod v angle and length performance Yes not long ago. Didn't think it really existed lol. I love it ! Not for everyone though that's why it's a custom rig lol . Perfect for what I'm using it for. Pete nailed it on what I wanted.
_________________
Dual 37 EFI GTR's pushing a 20/72 , CC, point bow , Old school drake Camo Willet custom.
|
| Sat Dec 26, 2015 7:48 pm |
|
|
|
NTXbighorn93
MMT Pro Member
Joined: Fri Jan 30, 2015 10:16 am
Posts: 101
Location: North Texas
|
Re: mod v angle and length performance Congrats man, It's definitely a badass rig! He does some good work for sure
_________________
1854 Uncle J sport deck with a 36 prodrive
When in doubt throttle it out!
|
| Mon Dec 28, 2015 2:13 am |
|
|
|
Hernaja1
MMT 1000 Club
Joined: Tue Feb 19, 2013 11:29 am
Posts: 2465
Location: Sulphur , La
|
Re: mod v angle and length performance Thank you. Really love the rig.
_________________
Dual 37 EFI GTR's pushing a 20/72 , CC, point bow , Old school drake Camo Willet custom.
|
| Mon Dec 28, 2015 7:58 am |
|
|
|
