| Author |
Message |
|
Bigrich
MMT Elite Member
Joined: Wed Dec 19, 2012 7:52 pm
Posts: 7064
Location: Mallard country
|
 Re: 1750 Deadfowl Build Have you been able to run it yet? Let me know how you like that light bar.
Sent from my iPhone using Tapatalk
|
| Tue Dec 01, 2015 8:05 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well do to all this lovely rainy weather we have been having every single day and the small ice storm we just had, I've been so busy. But i did manage to take it out for about 15 minutes just to check everything to make sure i didn't have to adjust motor position and what not. I had a 9 gallon tank half full (up front), one battery, me (195), my father (245) and i was running on average 29 at 4250-4350 rpm. My father got out and i dropped down to 28 average. All with the stock 3 blade. i don't remember how to tell the difference in pitch but mine has the nut flush with the hub of the prop. So i believe its the 11 but I'm not positive. As far as light bar, i haven't had the chance to wire anything at all. Hoping to get it all buttoned up this weekend and 100% complete. Then i will post up some pictures and hopefully get some run times not long after!!
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Dec 01, 2015 8:26 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build I also want to try out a BB and a 2 blade GT prop to see how those run on my rig. Also thought about slapping a hammer on there to see if the 37s had the nuts to spin it stock.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Tue Dec 01, 2015 8:30 pm |
|
|
|
RyanOvertime
MMT Member
Joined: Thu Feb 13, 2014 8:35 am
Posts: 25
|
Re: 1750 Deadfowl Build I feel like this is ideal boat and you're ahead of the manufactures by a mile with this one. Good job. I know this is the unethical thing to ask but how much?
|
| Sat Dec 05, 2015 8:50 pm |
|
|
|
TooTall
MMT Pro Member
Joined: Sun Nov 30, 2014 1:37 pm
Posts: 411
Location: Pineville, La
|
Re: 1750 Deadfowl Build
|
| Sat Dec 05, 2015 8:53 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well I got the rest of the turf done, finally. So here is a few pics. Still trying to finish all the wiring but it's hard when all the stuff you ordered 2 day shipping is 4 to 5 weeks late....but anyways, here you go guys. ImageUploadedByTapatalk1449428541.077779.jpgImageUploadedByTapatalk1449428563.206486.jpgImageUploadedByTapatalk1449428581.131372.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Dec 06, 2015 1:03 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1449428602.074442.jpgImageUploadedByTapatalk1449428622.967524.jpgImageUploadedByTapatalk1449428644.062212.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Dec 06, 2015 1:04 pm |
|
|
|
TooTall
MMT Pro Member
Joined: Sun Nov 30, 2014 1:37 pm
Posts: 411
Location: Pineville, La
|
Re: 1750 Deadfowl Build Looks bad ass man! The camo is just dark enough too that the boat pulls off the "murdered out" look. Love it!
|
| Sun Dec 06, 2015 1:17 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Preciate it! I think so too! I love the camp we decided to go with and I'm glad i went with a black motor to bring out the black in the camo and the turf. Tuesday i should be getting my interior lights hopefully after being on order for 5 weeks and shipped to the wrong address twice...and my charging relay broke when i was wiring it up, so ill have a new one friday. So hopefully ill have it all finally buttoned up this next weekend! She's battled me from day one, but i can hunt out of it at least until its done!
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Dec 06, 2015 1:28 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well I got my interior lights finally! Just have one single 10in strip wired to a feeder battery and just sitting in the catwalk to get an idea! The kit I bought has 2-20in strips and 4-10in strips. So here is a little teaser for you guys! ImageUploadedByTapatalk1449706308.879932.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Wed Dec 09, 2015 6:12 pm |
|
|
|
Quackkillz
MMT Addict
Joined: Sun Dec 04, 2011 4:57 am
Posts: 535
Location: Bottom of da boot
|
Re: 1750 Deadfowl Build Looks sharp!
Sent from my SAMSUNG-SM-N900A using Tapatalk
_________________
1648 weld bilt being followed by a 35 gtr
|
| Thu Dec 10, 2015 7:15 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Finally got it completely wired up!! Here are some pictures! Don't pay any attention to all the lose wire and tools laying in the boat or the battery up front. Just wanted to put power to it! ImageUploadedByTapatalk1449893846.690972.jpgImageUploadedByTapatalk1449893857.311317.jpgImageUploadedByTapatalk1449893867.866466.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Fri Dec 11, 2015 10:18 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1449893892.021961.jpgImageUploadedByTapatalk1449893911.848703.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Fri Dec 11, 2015 10:18 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1449893930.774701.jpgImageUploadedByTapatalk1449893946.701771.jpgImageUploadedByTapatalk1449893963.773777.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Fri Dec 11, 2015 10:19 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Here is some daytime pictures. ImageUploadedByTapatalk1450039139.066553.jpgImageUploadedByTapatalk1450039152.521710.jpgImageUploadedByTapatalk1450039167.078988.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Dec 13, 2015 2:39 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1450039185.888381.jpgImageUploadedByTapatalk1450039201.596519.jpgImageUploadedByTapatalk1450039222.671208.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Dec 13, 2015 2:40 pm |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build ImageUploadedByTapatalk1450039243.434185.jpgImageUploadedByTapatalk1450039256.307104.jpg
Sent from my iPhone using Tapatalk
You do not have the required permissions to view the files attached to this post.
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sun Dec 13, 2015 2:41 pm |
|
|
|
schmitt
MMT 1000 Club
Joined: Fri Jun 25, 2010 3:33 pm
Posts: 1177
Location: WI
|
Re: 1750 Deadfowl Build Looks great! Love My boat from RJ
_________________
1848 DeadFowl pushed by a Stage 4 Delta powered MB HDR (JBP dusting)
|
| Mon Dec 14, 2015 9:40 am |
|
|
|
swanger011
MMT Pro Member
Joined: Thu Jan 27, 2011 4:22 pm
Posts: 260
Location: North East, Tx
|
Re: 1750 Deadfowl Build Well I took her out hunting this morning finally, second from pin, trimmed all the way up and bumped back down, I was running 30 at 4300rpm. That's me, battery in back, battery up front, gas up front. Put my buddy and his better half on the boat with their dog and all our gear and could only do 23 at 3800 rpms..trimmed all the way up. So I moved my trim pin up to the top hole and I'll give that a try tomorrow if the wind dont shut us down
Sent from my iPhone using Tapatalk
_________________
1750 DeadFowl Custom with a GTR 37EFI
Build Thread: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=62923
|
| Sat Dec 19, 2015 12:48 pm |
|
|
|
