Not my boat. Hunters on the WMA I work at. We had to go help them turn around. They got lost on way back and took the wrong ditch.

Does being stuck in the middle of uptown New Orleans count? Another place a mud boat doesn't belong...

I hated trying to park my boat in NO. I also hated having to take every single thing out of it after every hunt when I lived there.

Coot won't have to worry about someone stealing his motor at least.

Whoops...

looks like a majority are prodrives.

So, what do that tell you AK???

ImageUploadedByTapatalk1355541987.802675.jpg
ImageUploadedByTapatalk1355542009.018639.jpg

That was a demo ride. Customer is picking up Tuesday

He wasn't with me

Are those push bars on the front?

Yep!!

ImageUploadedByTapatalk1355613011.075048.jpg

Have to ask why the push knees on a MM hull?

They also had some small shallow water alum barges built. The push knees allow them to push the barges around in marsh.

First time driving my new boat I bought yesterday. Lets say I learned a good lesson...don't let off the throttle.ImageUploadedByTapatalk1355888339.436235.jpg

ImageUploadedByTapatalk1355891779.891860.jpg

ImageUploadedByTapatalk1355892038.375984.jpg
First pic is what I thought I was parking the boat in and second pic is where I wound up after just squeezing the throttle towards the bank with jut a handheld spotlight...

Not at all

ImageUploadedByTapatalk1356559325.057439.jpg

I got out. I've learned that my transom is 1" too tall since when I turn the foot around I can't get the cav plate under the boat and if I trim down too much the prop will hit. It's up so high that if I'm not trimmed way down I'll just blow out my hole. To really reach down deep I'm at such a steep angle there's more verticals than horizontal thrust. Need to cut my transom down an inch.

Looks like some fun mud

My cavitation plate don't go under the boat? Shouldn't be stuck if there is water!

Does your prop hit? Mine hits of I trim too low.

No the cavitation plate hits, the prop shouldn't even come close to hitting. Measure your transom and report back. Should be 16 or 20 I think

nothing fancy...i was able to push off and continue ramming till i broke through.

recieved this text message yesterday from the Wax.. Anyone know this boat or the story?!?! prolly first time at the wax and had to leard the hard way about the tide!! lol

Did he not bolt it down? Lol

I saw awhile back one of the younguns just used the mount screws to mount his motor without bolts and this same thing happened to him.

Not sure what they are thinkin.