Mine ran just fine with a stock motor, but it is a 1848. But it ran its ass off with a stage 2.
Sent from my XT1080 using Tapatalk
| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| Prodigy 1854 https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=48725 |
Page 1 of 2 |
| Author: | Prodigy [ Mon Dec 30, 2013 10:30 pm ] |
| Post subject: | Prodigy 1854 |
This is my personal boat....... It was built to be open and functional. I like space on the inside of my boat and hate clutter and things getting in the way............Every small detail has a purpose. Options 1854 .125 5086 longitudinal stringers V Rake Rear Drop Deck Catwalks Rear Catwalk Bench 45 degree corners in rear large deck hatch extended deck trolling motor plug and bracket dual spud holes up front which can also be used for a spotlight/winch setup shark eyes full floors recessed bracing battery inside drop deck 13 gallon permanent fuel tank deck filler green LED lights under all flat surfaces 6 switch panel 1500 GPH Rule Bilge hydroturf Prodigy Bottoms Camo Gator Glide tall transom dual drain plugs grab bar 4 cup holders MudBuddy Black Death 4500 Tall Transom 32" out drive carb cover painted Prodigy Bottoms Magic Tilt Alum trailer 4 6" bunks carpeted fender pads side guides 14" custom rims and tires |
|
| Author: | JLACOUR [ Mon Dec 30, 2013 10:43 pm ] |
| Post subject: | Re: Prodigy 1854 |
Clean boat! |
|
| Author: | btmannin [ Tue Dec 31, 2013 12:17 am ] |
| Post subject: | Re: Prodigy 1854 |
That the one from the video you posted a few weeks ago? Damn fine lookin boat man you and Corey from cottonmouth are puttin out some of my favorite boats around lately.. Keep up the good work |
|
| Author: | Frog [ Tue Dec 31, 2013 4:14 am ] |
| Post subject: | Re: Prodigy 1854 |
What do you want for it? |
|
| Author: | Prodigy [ Tue Dec 31, 2013 5:59 am ] |
| Post subject: | Re: Prodigy 1854 |
No this is a diff one.. That one was a 1754 |
|
| Author: | DmaxHunter [ Tue Dec 31, 2013 6:27 am ] |
| Post subject: | Re: Prodigy 1854 |
Finally got you your boat, looks awesome bra. I'm still shocked you don't have a 7000 hanging off the back! But that is still one sexy ass rig. Sent from my DROID RAZR using Tapatalk |
|
| Author: | Gameover [ Tue Dec 31, 2013 6:44 am ] |
| Post subject: | Re: Prodigy 1854 |
what gas tank is that? |
|
| Author: | DmaxHunter [ Tue Dec 31, 2013 6:58 am ] |
| Post subject: | Re: Prodigy 1854 |
Believe its a moeller permanent 13, correct me if I'm wrong Chad Sent from my DROID RAZR using Tapatalk |
|
| Author: | Gameover [ Tue Dec 31, 2013 7:01 am ] |
| Post subject: | Re: Prodigy 1854 |
| Author: | DmaxHunter [ Tue Dec 31, 2013 7:11 am ] |
| Post subject: | Re: Prodigy 1854 |
Yeah, he will put a fuel gauge if wanted ( even thought they are hit yet miss) but yes sir he paints them and leaves that line unpainted so you can just look an see, where your fuel level is. Sent from my DROID RAZR using Tapatalk |
|
| Author: | OwenDickeson [ Tue Dec 31, 2013 9:21 am ] |
| Post subject: | Re: Prodigy 1854 |
It's beautiful Clark. |
|
| Author: | Jamie B. [ Tue Dec 31, 2013 9:40 am ] |
| Post subject: | Re: Prodigy 1854 |
That is a good looking boat, good job, good design. |
|
| Author: | 4Cody4 [ Tue Dec 31, 2013 9:49 am ] |
| Post subject: | Re: Prodigy 1854 |
| Author: | gfowel [ Tue Dec 31, 2013 11:31 am ] |
| Post subject: | Re: Prodigy 1854 |
| Author: | gfowel [ Tue Dec 31, 2013 11:37 am ] |
| Post subject: | Re: Prodigy 1854 |
Good looking boat! Nice job on the build. |
|
| Author: | cr244 [ Tue Dec 31, 2013 12:15 pm ] |
| Post subject: | Re: Prodigy 1854 |
very nice work. i like the v-rake |
|
| Author: | mike9b9 [ Wed Jan 01, 2014 2:58 pm ] |
| Post subject: | Re: Prodigy 1854 |
is this boat for sale or what? |
|
| Author: | mike9b9 [ Wed Jan 01, 2014 3:02 pm ] |
| Post subject: | Re: Prodigy 1854 |
sorry about last post , wrong section plus ruff night |
|
| Author: | DmaxHunter [ Wed Jan 01, 2014 6:29 pm ] |
| Post subject: | Re: Prodigy 1854 |
He can build you one! Sent from my DROID RAZR using Tapatalk |
|
| Author: | Prodigy [ Thu Jan 02, 2014 11:38 am ] |
| Post subject: | Re: Prodigy 1854 |
Id sell this boat yes.. |
|
| Author: | Frog [ Wed Jan 22, 2014 2:00 pm ] |
| Post subject: | Re: Prodigy 1854 |
| Author: | DmaxHunter [ Tue Jan 28, 2014 1:47 pm ] |
| Post subject: | Re: Prodigy 1854 |
He's got it on fb, said he'd take 19 after youth weekend. Sent from my shitty cell |
|
| Author: | Prodigy [ Wed Jan 29, 2014 10:02 pm ] |
| Post subject: | Re: Prodigy 1854 |
Sold pending funds guys........ |
|
| Author: | Bigrich [ Wed Jan 29, 2014 10:08 pm ] |
| Post subject: | Re: Prodigy 1854 |
Sure is a nice rig! |
|
| Author: | Prodigy [ Wed Jan 29, 2014 10:25 pm ] |
| Post subject: | Re: Prodigy 1854 |
tks sir |
|
| Author: | DmaxHunter [ Thu Jan 30, 2014 7:20 am ] |
| Post subject: | Re: Prodigy 1854 |
Your next one going to be full 3/16 Chad? Sent from my shitty cell |
|
| Author: | Prodigy [ Thu Jan 30, 2014 9:05 am ] |
| Post subject: | Re: Prodigy 1854 |
nah.........I don't need it but we are building a 1854 Stump Tuff Shortly..............3/16 w 8 stringers.......... |
|
| Author: | DmaxHunter [ Thu Jan 30, 2014 9:10 am ] |
| Post subject: | Re: Prodigy 1854 |
Hear that, can't wait to see that tank! Sent from my shitty cell |
|
| Author: | OwenDickeson [ Thu Jan 30, 2014 10:19 am ] |
| Post subject: | Re: Prodigy 1854 |
If they are going to be running alot of stumps, I would suggest putting the 2x2 stringers on 6" centers. |
|
| Author: | nasty [ Fri Jan 31, 2014 5:12 pm ] |
| Post subject: | Re: Prodigy 1854 |
| Author: | OwenDickeson [ Fri Jan 31, 2014 5:28 pm ] |
| Post subject: | Re: Prodigy 1854 |
Mine ran just fine with a stock motor, but it is a 1848. But it ran its ass off with a stage 2. Sent from my XT1080 using Tapatalk |
|
| Author: | Smoke [ Fri Jan 31, 2014 5:34 pm ] |
| Post subject: | Re: Prodigy 1854 |
| Author: | schmitt [ Fri Jan 31, 2014 7:29 pm ] |
| Post subject: | Re: Prodigy 1854 |
What trailer are u running? Is that the skt line from magic tilt 1860 |
|
| Author: | DmaxHunter [ Fri Jan 31, 2014 7:35 pm ] |
| Post subject: | Re: Prodigy 1854 |
Yeah, thought it was a moeller. And smoke is right, these boats ride great, and haul some serious ass with a built motor. This is a sweet setup, peeked it while picking up mine, well worth price Sent from my shitty cell |
|
| Author: | nasty [ Fri Jan 31, 2014 9:22 pm ] |
| Post subject: | Re: Prodigy 1854 |
| Author: | OwenDickeson [ Fri Jan 31, 2014 9:32 pm ] |
| Post subject: | Re: Prodigy 1854 |
| Author: | Migrator [ Fri Jan 31, 2014 10:50 pm ] |
| Post subject: | Re: Prodigy 1854 |
Nice boat. |
|
| Author: | barnes_53 [ Fri Jan 31, 2014 10:54 pm ] |
| Post subject: | Re: Prodigy 1854 |
Where did you get the blind shaggy panels? Good looking boat Chad. Sometimes less is more. Good job. |
|
| Author: | barnes_53 [ Fri Jan 31, 2014 11:01 pm ] |
| Post subject: | Re: Prodigy 1854 |
I see the floors are leveled with the cross braces. Hiw did you do that without having a place that will hook on the hull bottom? Is the cross brace still on top of runners and the floor is raised? Also, no braces going up sidewall from cross braces? |
|
| Author: | Prodigy [ Fri Jan 31, 2014 11:04 pm ] |
| Post subject: | Re: Prodigy 1854 |
those panels have been in the family.............. lol I bought en entire boat a couple years ago just to get another set of them lol the cross braces DO NOT touch the floor..........there is nothing to hook no need for the braces going up the side as my hulls are broken and the sides do not heed to be held up as there is not force on them trying to come back down.......... tks for the compliments bro |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|