| MudmotorTalk.com https://www.mudmotortalk.com/mmt_v2/ |
|
| V Crimp or Performance Crimp https://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=49935 |
Page 1 of 1 |
| Author: | tyler_johnson [ Mon Feb 03, 2014 2:46 pm ] |
| Post subject: | V Crimp or Performance Crimp |
Does anyone have pictures of the difference between these two crimps? Gonna get me one of those there mud hulls built here shortly and not sure the difference? Boat will be a 1750 with a beam between 63-65 inches and a narrow front (25"). Due to the timber. Dfou is doing the work for me just wondering the difference, and he recommends the V with a double taper and it should turn well and handle well. |
|
| Author: | Full Throttle [ Mon Feb 03, 2014 2:51 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
I think the faded v looks best. I've had v and performance. I can't tell much difference but I think one time brother Breaux told me he thought the v was stronger. |
|
| Author: | banded-mallard [ Mon Feb 03, 2014 3:02 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
IMG_2528.JPG IMG_0443.jpg |
|
| Author: | tyler_johnson [ Mon Feb 03, 2014 3:19 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
I agree with the fade/performance crimp, but dfou said that the narrow beam that I want would be easier with the v crimp. |
|
| Author: | OwenDickeson [ Mon Feb 03, 2014 3:32 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
How tall are the sides going to be. Thats a really narrow beam, gonna look like a box. |
|
| Author: | eljefe [ Mon Feb 03, 2014 3:33 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
or aluminium coffin with a motor on it!!!! |
|
| Author: | OwenDickeson [ Mon Feb 03, 2014 3:37 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
IDK, you can look at mine though when you pick up the motor. Its a V crimp with a 68" beam on a 48" bottom. My boat with the performance crimp had a 70" beam on a 48" bottom. |
|
| Author: | tyler_johnson [ Mon Feb 03, 2014 3:43 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
OK cool, yeah he said it should be fine at about 64 or so. And sides will be 20-22" Sent from my XT907 using Tapatalk |
|
| Author: | fowllife08 [ Mon Feb 03, 2014 7:00 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
| Author: | DuckHunterF250 [ Mon Feb 03, 2014 7:11 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
sounds like the same dimensions of bigrichs boat |
|
| Author: | tyler_johnson [ Mon Feb 03, 2014 7:19 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
| Author: | fowllife08 [ Mon Feb 03, 2014 8:04 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
1848. 64 1/2 beam. Its got a nice shape to it i got a build thread. |
|
| Author: | tyler_johnson [ Mon Feb 03, 2014 8:15 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
Sweet, and I can't find your build thread on my phone. Sent from my XT907 using Tapatalk |
|
| Author: | fowllife08 [ Mon Feb 03, 2014 8:16 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
viewtopic.php?f=4&t=48282 |
|
| Author: | cr244 [ Mon Feb 03, 2014 9:23 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
| Author: | OwenDickeson [ Mon Feb 03, 2014 9:29 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
The only boat I road in with the spuds through the hunt deck like that had water shooting up those holes and into the inside of the boat some. If you were sitting on the back seat, your back would get wet. |
|
| Author: | cr244 [ Mon Feb 03, 2014 9:35 pm ] |
| Post subject: | Re: V Crimp or Performance Crimp |
that suxx. ill just get wet or stick a rag in them LOL. the pipe welded on the back works fine it just dont look good to me. lots of boats are built with nice shape and style and that damn pipe sticking off the back looks like a sore dick.LOL |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|